diff --git a/target/linux/mediatek/dts/mt7981b-wavlink-wl-3port-128nand-common.dtsi b/target/linux/mediatek/dts/mt7981b-wavlink-wl-3port-128nand-common.dtsi new file mode 100644 index 0000000000..f796a00810 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-wavlink-wl-3port-128nand-common.dtsi @@ -0,0 +1,210 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981b.dtsi" + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + button-reset { + label = "reset"; + linux,code = ; + gpios = <&pio 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&pio { + spi0_flash_pins: spi0-pins { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP"; + drive-strength = <8>; + bias-pull-up = <103>; + }; + + conf-pd { + pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO"; + drive-strength = <8>; + bias-pull-down = <103>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_flash_pins>; + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <52000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + read-only; + }; + + factory: partition@180000 { + label = "factory"; + reg = <0x180000 0x200000>; + read-only; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + eeprom_factory: eeprom@0 { + reg = <0x0 0x1000>; + }; + + macaddr_factory_4: macaddr@4 { + reg = <0x4 0x6>; + }; + }; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + read-only; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x4000000>; + }; + + partition@4580000 { + label = "hw"; + reg = <0x4580000 0x80000>; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_hw_44e: macaddr@44e { + compatible = "mac-base"; + reg = <0x44e 0x11>; + #nvmem-cell-cells = <1>; + }; + }; + }; + }; + }; +}; + +ð { + status = "okay"; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_hw_44e 0>; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_hw_44e 1>; + }; +}; + +&mdio_bus { + switch: switch@1f { + compatible = "mediatek,mt7531"; + reg = <31>; + reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <38 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&switch { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan1"; + }; + + port@6 { + reg = <6>; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + }; +}; + +&wifi { + status = "okay"; + nvmem-cells = <&eeprom_factory 0>; + nvmem-cell-names = "eeprom"; +}; diff --git a/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn551x3.dts b/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn551x3.dts new file mode 100644 index 0000000000..0387c73dd1 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-wavlink-wl-wn551x3.dts @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; + +#include "mt7981b-wavlink-wl-3port-128nand-common.dtsi" + +/ { + model = "WAVLINK WL-WN551X3"; + compatible = "wavlink,wl-wn551x3", "mediatek,mt7981b"; + + aliases { + label-mac-device = &wifi; + led-boot = &led_status_blue; + led-failsafe = &led_status_blue; + led-running = &led_status_blue; + led-upgrade = &led_status_blue; + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: led-0 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + }; + + led-1 { + color = ; + gpios = <&pio 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <1>; + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + }; + + led-3 { + color = ; + function = LED_FUNCTION_LAN; + function-enumerator = <2>; + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + }; + + led-4 { + color = ; + function = LED_FUNCTION_WAN; + gpios = <&pio 25 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 6d4c7903bc..62a0161286 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -206,6 +206,11 @@ tplink,re6000xd) ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-1" "lan2" "link tx rx" ucidef_set_led_netdev "eth1" "lan-3" "blue:lan-2" "eth1" "link tx rx" ;; +wavlink,wl-wn551x3) + ucidef_set_led_netdev "lan-1" "lan-1" "green:lan-1" "lan1" "link tx rx" + ucidef_set_led_netdev "lan-2" "lan-2" "green:lan-2" "lan2" "link tx rx" + ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx" + ;; wavlink,wl-wn586x3) ucidef_set_led_netdev "lan-1" "lan-1" "blue:lan-1" "lan1" "link tx rx" ucidef_set_led_netdev "lan-2" "lan-2" "blue:lan-2" "lan2" "link tx rx" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 802df4608c..1f9d3c551c 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -139,6 +139,7 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "port1 port3 port4 port5 port6" "port2" ;; tplink,tl-xdr6086|\ + wavlink,wl-wn551x3|\ wavlink,wl-wn586x3) ucidef_set_interfaces_lan_wan "lan1 lan2" eth1 ;; diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index e9e74efa1f..2e03bb8e7e 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -1972,6 +1972,24 @@ define Device/unielec_u7981-01-nand endef TARGET_DEVICES += unielec_u7981-01-nand +define Device/wavlink_wl-wn551x3 + DEVICE_VENDOR := WAVLINK + DEVICE_MODEL := WL-WN551X3 + DEVICE_DTS := mt7981b-wavlink-wl-wn551x3 + DEVICE_DTS_DIR := ../dts + DEVICE_DTS_LOADADDR := 0x47000000 + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + IMAGE_SIZE := 65536k + KERNEL_INITRAMFS_SUFFIX := .itb + KERNEL_IN_UBI := 1 + DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware + SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += wavlink_wl-wn551x3 + define Device/wavlink_wl-wn586x3 DEVICE_VENDOR := WAVLINK DEVICE_MODEL := WL-WN586X3