diff --git a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/common.c
index 0c5e9f3f38..0414be41f2 100644
--- a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/common.c
+++ b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/common.c
@@ -327,30 +327,7 @@ static int rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv)
 			}
 		}
 
-		if (!phy_node) {
-			if (priv->ports[pn].pcs)
-				priv->ports[pn].phy_is_integrated = true;
-
-			continue;
-		}
-
-		if (of_property_read_bool(phy_node, "phy-is-integrated") &&
-		    !of_property_read_bool(phy_node, "sfp")) {
-			priv->ports[pn].phy = PHY_RTL8218B_INT;
-			continue;
-		}
-
-		if (!of_property_read_bool(phy_node, "phy-is-integrated") &&
-		    of_property_read_bool(phy_node, "sfp")) {
-			priv->ports[pn].phy = PHY_RTL8214FC;
-			continue;
-		}
-
-		if (!of_property_read_bool(phy_node, "phy-is-integrated") &&
-		    !of_property_read_bool(phy_node, "sfp")) {
-			priv->ports[pn].phy = PHY_RTL8218B_EXT;
-			continue;
-		}
+		priv->ports[pn].phy = !!phy_node;
 	}
 
 	/* Disable MAC polling the PHY so that we can start configuration */
diff --git a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/dsa.c
index 86a8fc52be..cc51942259 100644
--- a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/dsa.c
+++ b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/dsa.c
@@ -526,7 +526,7 @@ static void rtldsa_93xx_phylink_mac_link_up(struct phylink_config *config,
 			mcr |= RTL930X_RX_PAUSE_EN;
 		if (duplex == DUPLEX_FULL || priv->lagmembers & BIT_ULL(port))
 			mcr |= RTL930X_DUPLEX_MODE;
-		if (dsa_port_is_cpu(dp) || !priv->ports[port].phy_is_integrated)
+		if (dsa_port_is_cpu(dp) || priv->ports[port].phy)
 			mcr |= RTL930X_FORCE_EN;
 	}
 
diff --git a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl838x.h
index acdc40f048..5efcdc3c56 100644
--- a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl838x.h
+++ b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl838x.h
@@ -896,15 +896,6 @@ typedef enum {
  */
 #define RTLDSA_COUNTERS_FAST_POLL_INTERVAL	(3 * HZ)
 
-enum phy_type {
-	PHY_NONE = 0,
-	PHY_RTL838X_SDS = 1,
-	PHY_RTL8218B_INT = 2,
-	PHY_RTL8218B_EXT = 3,
-	PHY_RTL8214FC = 4,
-	PHY_RTL839X_SDS = 5,
-};
-
 enum pbvlan_type {
 	PBVLAN_TYPE_INNER = 0,
 	PBVLAN_TYPE_OUTER,
@@ -1003,14 +994,13 @@ struct rtldsa_93xx_lag_entry {
 
 struct rtldsa_port {
 	bool enable:1;
-	bool phy_is_integrated:1;
+	bool phy:1;
 	bool isolated:1;
 	bool rate_police_egress:1;
 	bool rate_police_ingress:1;
 	u64 pm;
 	u16 pvid;
 	bool eee_enabled;
-	enum phy_type phy;
 	struct phylink_pcs *pcs;
 	int led_set;
 	int leds_on_this_port;
diff --git a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl931x.c
index 2e31c10cdc..ea5a239121 100644
--- a/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl931x.c
+++ b/target/linux/realtek/files-6.18/drivers/net/dsa/rtl83xx/rtl931x.c
@@ -1688,10 +1688,10 @@ static void rtldsa_931x_led_init(struct rtl838x_switch_priv *priv)
 		sw_w32_mask(0x3 << pos, (priv->ports[i].leds_on_this_port - 1) << pos,
 			    RTL931X_LED_PORT_NUM_CTRL(i));
 
-		if (priv->ports[i].phy_is_integrated)
-			pm_fiber |= BIT_ULL(i);
-		else
+		if (priv->ports[i].phy)
 			pm_copper |= BIT_ULL(i);
+		else
+			pm_fiber |= BIT_ULL(i);
 
 		set = priv->ports[i].led_set;
 		sw_w32_mask(0, set << pos, RTL931X_LED_PORT_COPR_SET_SEL_CTRL(i));