catspeed-cc/openwrt
2
1
Fork 0
Code Issues Pull Requests Activity

realtek: pcs: rtl930x: rename patching function

Browse Source 
Rename the function that currently "applies patches" so that it covers
everything it does (and will do). It doesn't only apply patches but in
general performs configuration of a SerDes for a particular hardware
mode.

While at it, remove a print above that call because it is both placed
wrong and redundant due to what the generic pcs_config prints.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22582
Signed-off-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Jonas Jelonek 2026-03-17 21:29:15 +00:00 committed by Robert Marko
parent 143407c6d3
commit f213e88576
1 changed files with 3 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
target/linux/realtek/files-6.12/drivers/net/pcs/pcs-rtl-otto.c
View File

@ -2951,8 +2951,7 @@ static void rtpcs_930x_sds_usxgmii_config(struct rtpcs_serdes *sds, int nway_en,
rtpcs_sds_write_bits(sds, 0x6, 0x1d, 11, 10, sync_bit);
}
static int rtpcs_930x_sds_patch(struct rtpcs_serdes *sds,
enum rtpcs_sds_mode hw_mode)
static int rtpcs_930x_sds_config_hw_mode(struct rtpcs_serdes *sds, enum rtpcs_sds_mode hw_mode)
{
int (*apply_fn)(struct rtpcs_serdes *, const struct rtpcs_sds_config *, size_t);
bool is_xsgmii = (hw_mode == RTPCS_SDS_MODE_XSGMII);
@ -3043,8 +3042,8 @@ static int rtpcs_930x_setup_serdes(struct rtpcs_serdes *sds,
if (ret < 0)
return ret;
/* Apply serdes patches */
ret = rtpcs_930x_sds_patch(sds, hw_mode);
/* Apply configuration for a hardware mode to SerDes */
ret = rtpcs_930x_sds_config_hw_mode(sds, hw_mode);
if (ret < 0)
return ret;
@ -3053,9 +3052,6 @@ static int rtpcs_930x_setup_serdes(struct rtpcs_serdes *sds,
/* dal_longan_construct_serdesConfig_init */ /* Serdes Construct */
rtpcs_930x_phy_enable_10g_1g(sds);
/* ----> dal_longan_sds_mode_set */
pr_info("%s: Configuring RTL9300 SERDES %d\n", __func__, sds->id);
/* Set SDS polarity */
rtpcs_930x_sds_set_polarity(sds, sds->tx_pol_inv, sds->rx_pol_inv);