The rtl8812au-ct driver is obsolete and replaced by rtw88. It will need
tons of work to compile against 6.18 so for now limit it to 6.12.
Co-authored-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update module files for kernel 6.18
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update module files for kernel 6.18
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Replace the two-step hrtimer initialization pattern with a single
consolidated call to hrtimer_setup().
The legacy approach of calling hrtimer_init() followed by manual
assignment to timer.function is deprecated. The new hrtimer_setup()
helper atomically initializes the timer and assigns the callback
function in one operation, eliminating the race-prone intermediate
state where the timer is initialized but lacks a handler.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reintroduce old-style debugfs file_operations for kernels < 6.14 and
switch the drivers to use debugfs_short_fops + debugfs_create_file_aux
on >= 6.14. This restores compatibility with older kernels while keeping
the new debugfs API working on 6.14+.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch set introduces support for using the in-tree (mainline)
EIP93 crypto driver for kernel 6.18 and later, along with additional
improvements and fixes:
- Conditional Kconfig/Makefile handling for crypto-hw-eip93 to enable use of the mainline driver with kernel 6.18+.
- Patch 926: Use software AES fallback for small requests in the EIP93 driver.
- Patch 927: Add `mediatek,mtk-eip93` compatible string for upstream kernel device trees.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a config option for the 6.18 series of kernels
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Change GPIOF_ACTIVE_LOW to gpiod_toggle_active_low
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport upstream driver and apply pending downstream patches to
support using the MaxLinear MxL86252 and MxL86282 switches.
The driver supports a native proprietary 8-byte DSA special tag format
(mxl862xx) as well as using an 802.1Q-based DSA tag (mxl862xx-8021q).
All basic bridge, VLAN and LAG operations are supported. A single port
can be used as mirror port. Hardware counters are made available as
ethtool stats or directly serve as interface counters (bytes,
packets).
The switch runs a complex ZephyrOS-based firmware on an integrated
ARC microcontroller, the driver uses the firmware management API over
MDIO to interact with the switch hardware.
Note that the firmware needs to be rather recent (WSP 1.0.78 or later)
to work well with this driver. It can be updated at runtime using devlink.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
a665659dee50 wifi: mt76: fix beacon monitor for MBSSID nontransmitted BSS
1b26f5f63d42 wifi: mt76: mt7996: Decrement sta counter removing the link in mt7996_mac_reset_sta_iter()
0c1dedac48c3 wifi: mt76: mt7996: Switch deflink to seclink only if link lookup does not fail
7fa21be01b97 wifi: mt76: mt7996: Rely on msta_link link_id in mt7996_vif_link_remove()
492a407111c3 wifi: mt76: mt7996: Account active links in valid_links fields
ade83e44eda0 wifi: mt76: mt7996: Move mlink deallocation in mt7996_vif_link_remove()
efebeea5c058 wifi: mt76: mt7996: Destroy vif active links in mt7996_remove_interface()
a4c790aef40d wifi: mt76: mt7996: Add mcu APIs to enable/disable vif links.
018f60316d4d wifi: mt76: mt7996: Destroy active sta links in mt7996_mac_sta_remove()
Signed-off-by: Felix Fietkau <nbd@nbd.name>
"qca,gpio-mask" used to be read between ath9k_hw_init() and
ath9k_init_queues(). After 12913c3c56
it is read in ath9k_of_init(), but it gets overwritten by
ath9k_gpio_cap_init() during the call of ath9k_hw_init(), and causes
https://github.com/openwrt/openwrt/issues/22340
If keeping the most of 12913c3c56,
ath9k_gpio_cap_init() could be patched to keep the existing non-zero
gpio mask (coming from device tree).
Tested on Netgear WNDR4500 v3:
[ 22.558083] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 22.569548] ath: phy1: Use overridden gpio mask 0xf6ff
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22376
Signed-off-by: Robert Marko <robimarko@gmail.com>
No longer used. If swapping is desired, ralink,mtd-eeprom can be used.
Otherwise nvmem.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22207
Signed-off-by: Robert Marko <robimarko@gmail.com>
mt76 tracks the PSM state of a sta internally with a wcid flag. TX to
such clients is skipped based on the presence of this flag.
This flag was not added to the PS state notify handler for MT7915 chips.
Without this flag, mt76 queues pending frames to the hardware,
accounting for airtime when a PSM notification is received while in a TX
iteration.
Set the PS flag for the STA WCID to prevent this from happening. TX gets
skipped in presence of this flag.
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20260313112502.2026974-1-mail@david-bauer.net/
Signed-off-by: David Bauer <mail@david-bauer.net>
Remove unmatched endif.
fixes: 2948dbebbf ("mac80211: use OpenWrt mirror for b43 fw downloads")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22430
Signed-off-by: Robert Marko <robimarko@gmail.com>
There is no point in printing the missing M3 memory dump adress message
on each boot under the warning level, as not all boards need it at all.
So, degrate it to a debug print with QMI mask.
Signed-off-by: Robert Marko <robimarko@gmail.com>
This adds kernel packages for the Microchip KSZ9477 switch family.
The core package has a target specific dependency as the ksz9477
driver enables DCB which grows the kernel size and can negatively
impact other targets.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22257
Signed-off-by: Robert Marko <robimarko@gmail.com>
Makes it clear that the allocation is dealing with a flex array member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21960
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is nearly identical to what landed in ath-next for v7.1, aside from
resolving a couple conflicts. A separate patch has been added to replace
CONFIG_THERMAL with CPTCFG_ATH12K_THERMAL so the setting may be enabled
via menuconfig (as is done with ath10k and ath11k).
Note that at this stage, throttling has not been implemented upstream,
hence the slight change in wording versus existing options.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22280
Signed-off-by: Robert Marko <robimarko@gmail.com>
22fb70661799 fix flex array not at end of struct
6a5c4716ca25 convert memcpy + ETH_GSTRING_LEN to ethtool_puts
Signed-off-by: Robert Marko <robimarko@gmail.com>
Embed gpio_led struct in ath_led. Simpler Allocation.
Use a flex array for the name. Allows using a single allocation.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21933
Signed-off-by: Robert Marko <robimarko@gmail.com>
ath79 at this point supports no ath5k devices.
The only targets with ath5k usage are bcm47xx, ixp4xx, and lantiq.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19848
Signed-off-by: Robert Marko <robimarko@gmail.com>
The single user of the downstream gpio-cascade driver has been switched
to use the upstream gpio-line-mux driver. Thus, we can drop the former
now.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add the GPIO line mux driver as a kernel module for selected usage by
devices.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for Richtek RTQ6056 Current and Power Monitor ADC.
RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus
compatible interface, and the device provides full information for
system by reading out the load current and power.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
OpenWrt issue:
https://github.com/openwrt/openwrt/issues/16183
Problem summary:
On qualcommax (ipq60xx/ipq807x) with ath11k, monitor-mode captures contain
frames that are consistently longer than expected by 8 bytes.
The symptom is visible in pcap/radiotap captures, and Wireshark parsing
becomes correct after manually cutting these 8 bytes from captured frames.
This patch:
- Remove merge-stage FCS/tail manipulations in ath11k_dp_rx_mon_merg_msdus().
- add length fix in ath11k_dp_rx_mon_deliver(), trim 8 bytes right
before radiotap update and delivery to mac80211.
This targets monitor capture length correctness only and keeps the fix scoped
to the monitor RX delivery path.
Tested-on: ipq8072 yuncore,ax880; ipq6018 yuncore,ax840; yuncore,fap650
Signed-off-by: Ruslan Isaev <legale.legale@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22244
Signed-off-by: Robert Marko <robimarko@gmail.com>
The &pointer + 1 trick is a C89 trick to point to area allocated after
the size of the struct. We have struct_size and flex arrays now.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22170
Signed-off-by: Robert Marko <robimarko@gmail.com>
This reverts commit c053b22573.
KSZ DSA driver is the only thing in the kernel selecting DCB support
instead of depending on it if required.
So, it will enable DCB support without asking and we do not want the
kernel size increase, as well as current Layerscape ARMv8 build failure.
So, revert this until its fixed upstream or worked around.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add menuconfig options to include modules for (virtio) vsockets. These are
used when running as Guest OS in a VM.
OpenWRT can be run in a vm (mostly commonly on the x86/64 and armsr
targets). Often it is convenient to have some sort of guest agent running,
to ease communication from host to guest.
Virtual Sockets provide this communication channel.
Virtio is a transport for this communication channel.
Virtual Sockets over virtio are for example used by Incus.
Virtual Sockets in general are used by most hypervisors, including VMware,
Hyper-V, and libvirt (qemu). These may need other transport-specific
modules not included in this commit.
Signed-off-by: Mathijs Rietbergen <mathijs.rietbergen@proton.me>
There are a number of pse chips already present in upstream Linux.
OpenWrt is starting to support a number of devices can contain various pse
chips. But having all the pse chip combinations defined at the target
level will result in bloat on images.
Present the current upstream Linux pse drivers as packages so that they
can be selectively included per board (rather than per target).
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
[Make it depend on REGULATOR_SUPPORT, and !SMALL_FLASH]
Link: https://github.com/openwrt/openwrt/pull/22172
Signed-off-by: Robert Marko <robimarko@gmail.com>
This adds kernel packages for the Microchip KSZ9477 switch family.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/22120
Signed-off-by: Robert Marko <robimarko@gmail.com>
sc->gpiochip is assigned to gc when it should be the other way around.
This allows gpiod_free to work properly.
Fixes: e78dc2eae4 ("mac80211: ath9k: clean up gpiochi")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22158
Signed-off-by: Robert Marko <robimarko@gmail.com>
It looks like commit 6d2f3b1b19 ("package: kernel: dtc: Add DTO support")
added this patch file 9 years ago without it ever being applied anywhere.
Back then there wasn't even a 'dtc' package, but we just used 'dtc' from
the Linux kernel sources.
Nowadays there is package/utils/dtc which is used to build dtc to be used
on the target (*not* a host-build!), and it of course already contains
support for device tree overlays since v1.4.3 from 2017...
This reverts commit 6d2f3b1b19.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/22118
Signed-off-by: Robert Marko <robimarko@gmail.com>
EN7528 shares the same clock/reset controller as EN7523. Enable
COMMON_CLK_EN7523 and RESET_CONTROLLER for ethernet hardware resets.
Update econet-eth driver and add it as default package.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21326
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
It's not the proper one. No of_platform_ APIs are being used.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21164
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Removing tmp/ after having built base-files or toolchain currently
breaks rootfs generation:
$ rm -rf tmp
$ make V=w
...
make[2] package/install
cat: .../openwrt/tmp/base-files.version: No such file or directory
cat: .../openwrt/openwrt/tmp/libc.version: No such file or directory
ERROR: 'base-files=' is not a valid world dependency, format is name(@tag)([<>~=]version)
make[2]: *** [package/Makefile💯 package/install] Error 99
The only way to recover from here is to clean toolchain and base-files via
$ make package/{base-files,toolchain}/clean
tmp is supposed to be ephemeral, so clearing it is an expected action,
which normally just triggers a regeneration of all files there.
Fix this by moving the version files to $(STAGING_DIR).
Fixes: 63e178f067 ("build: lock versions for special APK packages")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21803
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a module for tpm-tis-spi for TCG TIS 1.3 TPM security chips
connected to a regular non-tcg SPI master.
Add imx target compatibility for kmod-tpm.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Link: https://github.com/openwrt/openwrt/pull/21726
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switchdev driver used by microchipsw supports DCB and has not storage
constraints, so enable kernel and driver DCB support by default.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Update the econet-eth driver to a new version which is of
sufficient quality that it is realistic to think about upstreaming.
This version is now NAPI based, collects stats, downloads without
dropped packets anymore, has debugfs introspection, and can be
unloaded and reloaded (providing the reset controller is present).
PR #21545 is recommended but not required, without this the
ethernet driver will log a warning on startup because it can't get
the resets and it will be impossible to unload and reload the
driver without a reboot. However, the PoC driver was not capable of
reloading so this is not a regression.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/21557
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
nf_conntrack_ipv6 is no longer a separate kernel module, so remove it.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21612
Signed-off-by: Robert Marko <robimarko@gmail.com>
This driver supports the ADT7470 thermal monitoring chip, which is used
in the ECS4100-12PH switch.
Fixes: fa9f925951 ("realtek/rtl839x: Edgecore ECS4100-12PH support")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Link: https://github.com/openwrt/openwrt/pull/21505
Signed-off-by: Robert Marko <robimarko@gmail.com>
The Motorcomm YT8821 2.5G PHY is being used in some devices as an
alternative to devices like the RTL8221B. Package it as a kmod
so it can be used as a device package rather than requiring changes
to the target kernel config.
Signed-off-by: Andrew MacIntyre <andymac@pcug.org.au>
Link: https://github.com/openwrt/openwrt/pull/21399
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce the kmod-pmbus-sensors package to provide the
generic PMBus hwmon driver (CONFIG_SENSORS_PMBUS).
This enables support for a wide range of PMBus-based devices
including ADP4000, BMR310, BMR480, MAX20796, TPS544B25, and others.
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://github.com/openwrt/openwrt/pull/21444
Signed-off-by: Robert Marko <robimarko@gmail.com>
Currently, kmod-crypto-kpp is only implied for curve25519 and thus it
can get unselected and then building will fail due to missing kpp.ko.
Same issue happens with kmod-crypto-hash for poly1305.
So, lets drop the whole implies logic and make sure to always select
them as dependencies.
Fixes: #21386
Link: https://github.com/openwrt/openwrt/pull/21483
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump to 2025-11-04 snapshot.
Added 100-gcc15-fix.patch which drops __DATE__/__TIME__ usage and provides
a stable fallback ("unknown"). This fixes build failures with GCC 15 and
-Werror=date-time in kernel builds.
% git log --oneline 04923c5..adb2f72
adb2f72e6fb8 get rid of spurious ubsan complaint for nat46_instance_t pairs field
d5f88686a4a8 Add a test harness which boots the kernel under kvm with a custom init which runs the tests
b983bab221f0 nat46-core: Fix FIXMEs about ICMPv6 parameter pointers
1aca482d6917 Add support for ignoring traffic class or TOS translation at the same time
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21284
[Removed "Replace printk with pr_* macros" patch]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is adding SUN6I-CSI and OV5640 driver for AllWinner platform for NanoPi
Signed-off-by: Michel Promonet <michel.promonet@free.fr>
Link: https://github.com/openwrt/openwrt/pull/20085
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Switch rtl8812au-ct to use the new virtual kmod provides semantic.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch ath10k and related kmods to use the new virtual kmod provides
semantic and mark ath10k as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
Switch r8169 and related kmods to use the new virtual kmod provides
semantic and mark r8169 as the default variant.
Signed-off-by: George Sapkin <george@sapk.in>
Link: https://github.com/openwrt/openwrt/pull/21288
Signed-off-by: Robert Marko <robimarko@gmail.com>
- Changing return type from void to int
- Returning error code instead of void on superio_enter() failure
- Returning 0 on success
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21218
Signed-off-by: Robert Marko <robimarko@gmail.com>
Interrupt vector for reo2host-status is wrongly assigned.
Status interrupts weren't received and a workaround was applied to
mac80211 to periodically poll the reo status ring. Therefore, the
workaround can be removed with the proper hardware interrupt line
assigned.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21271
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add 08644db02d
to allow builds against the 6.18 series of kernels.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21190
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add menuconfig option 'kmod-usb-gadget-fs' for the USB FunctionFS gadget
module
OpenWRT is perfect for USB gadgets that are network-enabled, since it
provides everything needed to easily manage the device. Having support
for the FunctionFS gadget enables the use of any custom USB devices
that does not have a specific module, like Media Transfer Protocol.
Signed-off-by: Dominic Germain <dominic@germain.cc>
Link: https://github.com/openwrt/openwrt/pull/21207
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The build system allows to use Linux release candidate kernels (-rcX).
For this a target/linux/generic/kernel-6.XY as follows is needed:
LINUX_VERSION-6.XY = -rc1
LINUX_KERNEL_HASH-6.XY-rc1 = 18ba6ebd72f46b881e0d73e390b2888b7b43...
Sadly the builds fail with a packaging error.
fakeroot /home/openwrt/openwrt/openwrt/staging_dir/host/bin/apk
mkpkg --info "name:kernel" --info "version:6.15-rc1~c4bf...1f6-r1"
ERROR: info field 'version' has invalid value: package version is invalid
The apk metadata specification reads:
"... Currently the APK version specification is as follows:
number{.number}...{letter}{_suffix{number}}...{~hash}{-r#} ...
Optionally one or more _suffix{number} components can follow.
The list of valid suffixes (and their sorting order) is: alpha,
beta, pre, rc, <no suffix>, cvs, svn, git, hg, p."
Given that the kernel uses "-rcX" naming scheme and apk requires
"_rcX" instead, simply translate the dash to an underscore for
these builds.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21214
Signed-off-by: Robert Marko <robimarko@gmail.com>
Teaming is a link aggregation implementation similar to bonding, but
it's configured by a userspace program.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21120
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport patch fixing support for GCC15 caused by __counted_by.
This macro was moved to a different header in recent kernel version and
caused wrong detection on the #ifndef condition.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending fix for wrong resource_size() usage that cause firmware
crash on load on ath11k.
Refresh all affected patch by this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The issue described in the patch can not be reproduced in the latest
6.18 ath10k-ct driver. It should have been fixed by the upstream.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/21089
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Switch ath10k-ct kernel version base to 6.18 to align with backports
package based on 6.18 kernel version.
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport upstream patch fixing support for 6.18 due to kernel upstream
commit b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio
index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Drop all upstreamed patch and refresh all affected patch.
Minor changes were needed to the
350-mac80211-allow-scanning-while-on-radar-channel due to changes in
6.18.
Also some changes were needed to downstream patch due to upstream commit
b74947b4f6ff ("wifi: cfg80211/mac80211: Add support to get radio index")
Link: https://github.com/openwrt/openwrt/pull/20964
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This is about as simple as it gets, it's able to start up and put
the onboard switch into dumb switch mode and then send untagged
frames which become available on every switch port.
It is out-of-tree to allow for rapid development and it is being
proposed now because even in this state it brings a lot of value
to the EcoNet platform and it is a fairly complex ethernet system
so it will take some time before the driver is in a state that
may be considered for upstreaming.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Link: https://github.com/openwrt/openwrt/pull/20685
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
