The current code permits support of the standalone PCS feature only for
in-tree kernel module but doesn't correctly support PCS from external
kernel module.
This is caused by the fact that the FWNODE_PCS config flag is internally
selected by any PCS driver and can't be selected directly. This is
problematic for any external kernel module that wants to use the standalone
PCS feature and needs the OPs provided by the generic PCS code.
Moreover compiling the standalone PCS code as a module is problematic and
would cause link error caused by the late PCS code that introduce a
notifier where phylink code depends on.
To address both problem, permit to select the FWNODE_PCS and change it to a
simple bool preventing it to compile as a module.
Link: https://github.com/openwrt/openwrt/pull/23349
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Enable static key (jump label) on all supported architectures. This
lowers overhead and stress on the branch prediction of the CPU and
generally makes the kernel faster.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23073
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The Kconfig symbol help text prompts:
Disable this to get a possibly more secure configuration, but that
might not be backward compatible with previous kernels.
If backward compatibility is not an issue, then it is safe and
recommended to say N here.
For OpenWrt, when updating firmware, we always update the kernel and
recreate the overlay partition. Therefore, compatibility is not a
problem.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/23126
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Motorcomm YT6801 is a PCIe ethernet controller based on DWMAC4 IP. It
integrates an GbE phy, supporting WOL, VLAN tagging and various types
of offloading. It ships an on-chip eFuse for storing various vendor
configuration, including MAC address.
The PM and plat_data functions were slightly modified to build with
current kernel.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/22923
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This symbol is selected by CONFIG_BPF, which was already enabled
on generic config-6.12.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If DSA support is enabled, then these will pop up.
So instead of ending up in target configs, add them to the generic configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upstream 2b81db8a7f4475e141a8ffd7cc745ed9f15962df introduced several new
symbols. This commit adds them and also applies alphabetical order via
./scripts/kconfig.pl target/linux/generic/config-6.12
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22276
Signed-off-by: Robert Marko <robimarko@gmail.com>
The single user of the downstream gpio-cascade driver has been switched
to use the upstream gpio-line-mux driver. Thus, we can drop the former
now.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport the upstream 'gpio-line-mux' driver which allows to provide a
1-to-many mapping between one physical GPIO and multiple virtual GPIOs,
based on a multiplexer.
For this purpose, there's been a dedicated downstream driver
'gpio-cascade' which is mostly the same, but wasn't upstreamed in the
end. Independently developed, the 'gpio-line-mux' driver was upstreamed
to solve the exact same problem occuring on Realtek-based Zyxel XS1930
switches. Support for those is being worked on, but the hardware uses a
similar quirk for SFP signals. The signals 'RX_LOS', 'MOD_ABS' and
'TX_FAULT' do not have dedicated GPIOs each but all use a single GPIO
which is multiplexed. Depending on the multiplexer state the GPIO line is
connected to one of the signals.
Since the SFP driver needs single GPIOs for the single signals, this
adapter drivers fills the gap to make both work together.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22206
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are a number of pse chips already present in upstream Linux.
OpenWrt is starting to support a number of devices can contain various pse
chips. But having all the pse chip combinations defined at the target
level will result in bloat on images.
Present the current upstream Linux pse drivers as packages so that they
can be selectively included per board (rather than per target).
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
[Make it depend on REGULATOR_SUPPORT, and !SMALL_FLASH]
Link: https://github.com/openwrt/openwrt/pull/22172
Signed-off-by: Robert Marko <robimarko@gmail.com>
Advertise the default 'not set' of this CONFIG higher in the tree since
it's already referenced by several other targets, with a few more targets
missing this reference (which fails build to prompt for N/y/m).
Signed-off-by: Bevan Weiss <bevan.weiss@gmail.com>
CONFIG_REGULATOR_QCOM_LABIBB is being disabled by targets manually, so
instead lets disable it in generic config.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Instead of disabling CONFIG_REGULATOR_QCOM_SPMI manually per target,
lets simply disable it in generic config.
Signed-off-by: Robert Marko <robimarko@gmail.com>
CONFIG_REGULATOR_QCOM_USB_VBUS showed up on Layerscape recently, and it
looks like multiple targets disable it manually, so simply disable it in
generic configuration instead.
Signed-off-by: Robert Marko <robimarko@gmail.com>
The CONFIG_SOFTLOCKUP_DETECTOR_INTR_STORM option shows up when the
OpenWrt option CONFIG_KERNEL_SOFTLOCKUP_DETECTOR is activated.
Link: https://github.com/openwrt/openwrt/pull/21710
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is adding SUN6I-CSI and OV5640 driver for AllWinner platform for NanoPi
Signed-off-by: Michel Promonet <michel.promonet@free.fr>
Link: https://github.com/openwrt/openwrt/pull/20085
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Set SND_SOC_NAU8325 to no
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21329
Signed-off-by: Robert Marko <robimarko@gmail.com>
Teaming is a link aggregation implementation similar to bonding, but
it's configured by a userspace program.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21120
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add the missing symbol to fix build halt on aarch64 targets:
```
Contiguous PTE mappings for user memory (ARM64_CONTPTE) [Y/n/?] (NEW) make[7]: *** [scripts/kconfig/Makefile:85: syncconfig] Error 1
make[6]: *** [Makefile:686: syncconfig] Error 2
```
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/20954
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
SQUASHFS_DECOMP_MULTI_PERCPU is selected by
SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU, so add it.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/20140
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport support for Aeonsemi AS121xxx PHY. The PHY require dedicated
firmware to be loaded to correctly work and support a big family of
Aeonsemi PHY that provide from 1G to 10G speed.
Automatically refresh all affected patch and file (rtl PHY).
Link: https://github.com/openwrt/openwrt/pull/19816
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add new option required to build with VHOST_MENU=y
This option enables two IOCTLs: VHOST_SET_FORK_FROM_OWNER and
VHOST_GET_FORK_FROM_OWNER. These allow userspace applications
to modify the vhost worker mode for vhost devices.
Also expose module parameter 'fork_from_owner_default' to allow users
to configure the default mode for vhost workers.
By default, `VHOST_ENABLE_FORK_OWNER_CONTROL` is set to `y`,
users can change the worker thread mode as needed.
If this config is disabled (n),the related IOCTLs and parameters will
be unavailable.
If unsure, say "Y".
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/19618
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows building the kmod-drm-ivpu which depends on
CONFIG_DRM_ACCEL. This module is x86_64 only.
Link: https://github.com/openwrt/openwrt/pull/19480
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add new mtdsplit parser "mstc-boot" for the devices manufactured by MSTC
(Mitra Star Technology Corp.). This is necessary to handle dual-boot on
those devices.
This parser splits kernel+rootfs or only rootfs(or UBI) based on the
image in the firmware partition or pre-defined partitions in dts, and
"bootnum" value in the "persist" (or "working") partition.
Note: "bootnum" is used for switching active firmware partitions on the
devices manufactured by MSTC and '1' or '2' are used on most
devices. But some devices use '0' or '1'. (example: I-O DATA
WN-DEAX1800GR)
Sequence:
1. obtain "bootnum" value
2. child nodes exsist (regardless of bootnum)
-> fixed partitions
(active parts : without bootnum (ex.: "kernel", "rootfs")
inactive parts: with bootnum (ex.: "kernel2", "rootfs2"))
3. current partition is active (dt bootnum == mtd bootnum)
-> image-based partitions
Device Tree:
- common
- mstc,bootnum : "bootnum" value for the mtd partition (0/1/2)
- mstc,persist : phandle of "persist" partition containing "bootnum"
value
- fixed partitions
- #address-cells: indicate cell count of address of child nodes (1)
- #size-cells : indicate cell count of size of child nodes (1)
- (child nodes) : define the child partitions
- reg : define the offset and size
- label-base : define the base name of the partition
- (example) : base:"kernel"->"kernel"(active)/"kernel2"(inactive)
example:
partition@3c0000 {
compatible = "mstc,boot";
reg = <0x3c0000 0x3240000>;
label = "firmware1";
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x800000>;
label-base = "kernel";
};
partition@800000 {
reg = <0x800000 0x2a40000>;
label-base = "ubi";
};
};
- image-based partitions
(no additional properties)
example:
partition@5a0000 {
compatible = "mstc,boot";
label = "firmware1";
reg = <0x5a0000 0x3200000>;
mstc,bootnum = <1>;
mstc,persist = <&mtd_persist>;
};
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18976
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Package kernel modules for PS/2 mouse support, mostly to allow
using touchpads and trackpoints built-into laptops (many of those
are connected using classic i8052-compatible PS/2 I/O).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Move the following kernel symbol configs to generic:
COMPRESSED_INSTALL and IMX_SCMI related configs
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19380
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This broke the armsr/armv8 build.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://github.com/openwrt/openwrt/pull/19200
Signed-off-by: Robert Marko <robimarko@gmail.com>
All kernel config symbols are refreshed by `make kernel_oldconfig`.
Some symbols are moved to the generic/config-6.12 because the
refresh tool will automatically trim them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport accepted BCM5325 patches from net-next.
These patches will be merged in the v6.17 kernel window.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add kernel package for DesignWare I2C platform controller.
This controller is used on the RP1 SoC found on RPi 5 devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add kernel packages for DesignWare SPI core and MMIO controllers.
This is needed for the RP1 SoC found on RPi 5 devices.
Tested with a Microchip ENC28J60 Ethernet controller on a RPi 5.
Signed-off-by: Albrecht Lohofener <albrechtloh@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19049
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
this symbol got picked up by the 6.12 UML conversion.
CONFIG_FBNIC = FaceBook/Meta Platforms Host Network Interface
it should be disabled by default in generic.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This adds a few ARM-related kconfig options that makes the
configure phase smooth on ARM (32bit) systems.
We default PAN to enabled for protection, however this has
a syscall speed penalty, if your system is interacting a lot
from userspace you might want to disable it for speed vs
security. For in-kernel routing it should not be a major
issue.
Some marginal ARM system enables DRM so make sure we have
the related DRM Kconfigs set up to unselected.
Link: https://github.com/openwrt/openwrt/pull/18900
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
