In the conversion to meson, this was overlooked.
Fixes e15d5cf752: ("tools/util-linux: build with meson")
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20688
Signed-off-by: Robert Marko <robimarko@gmail.com>
Patch CMakeLists.txt to fulfill cmake 4.0 requirements
of cmake_minimum_required being at least 3.5 and in future 3.10.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20265
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add 3 pending patch that improve binary reproducibility. The first
address a problem with RPATH string not getting cleared on removal of
RPATH entry from ELF section. The other 2 skip including external shared
library in RPATH in meson build phase.
This follows the logic that on cross-compiling we can't run the binary
anyway as it does target a different arch hence it doesn't make sense to
include those extra path in RPATH causing reproducibility problems (as
path for those external library will depend on the build system path)
Link: https://github.com/openwrt/openwrt/pull/20389
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Update package to the latest stable version.
All patches need to be updated.
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Link: https://github.com/openwrt/openwrt/pull/20379
Signed-off-by: Nick Hainke <vincent@systemli.org>
Current PKG_MIRROR_HASH is wrong, but it went unnoticed, because the
tarball is being fetched from @OPENWRT project mirrors. After
042996b46b revert the correct hash can be reproduced with:
make tools/xxhash/{download,check} FIXUP=1 DL_DIR=/tmp PKG_MIRROR_HASH=''
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Link: https://github.com/openwrt/openwrt/pull/20322
Signed-off-by: Robert Marko <robimarko@gmail.com>
Jobserver support was merged upstream.
Switch to local tarball archives. Smaller and more standard.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20267
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the environment variable `CI` is set, ccache will enable the CMake
option CCACHE_DEV_MODE by default. This leads to differing behaviour
between local and CI builds which takes quite some time to debug. 🤯
Achieve consistent behaviour between local builds and CI builds by
setting CCACHE_DEV_MODE. Set it to OFF, because CCACHE_DEV_MODE amongst
other settings like linker choice, enables -Werror, which will lead to
potential compilation failures when the host compiler is updated. Using
-Werror for host utils is not desirable, because the compiler version
used is not controlled by the OpenWrt build system and host utils should
compile successfully on an as wide range of host OSes as possible.
Reported-by: Roman Azarenko <roman.azarenko@iopsys.eu>
Signed-off-by: Andreas Gnau <andreas.gnau@iopsys.eu>
Link: https://github.com/openwrt/openwrt/pull/20290
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
0782d24 Revert "ptgen: do not create stub partition to fill a gap if gap caused by alignment"
Fixes: #20254
Fixes: c5ece837a3 ("firmware-utils: update to git HEAD")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7e6f69b npk_pack_kernel: add tool for creating MikroTik NPK kernel packages
d3f8b6e zynsig: add new tool for creating images for the ZyXEL GS1920 series
9fa340d ptgen: create separate images for gpt data structure
78d8084 ptgen: allow image generation for a specified disk size
3f2d148 ptgen: allow non-default placement of gpt entry table
f1f98b0 ptgen: do not create stub partition to fill a gap if gap caused by alignment
6ea8b6d ptgen: fix protective MBR partition size
febfef7 ptgen: use long long instead of long for sizes
996dc48 ptgen: fix misprint and simplify calculation a bit
0725c3d build: require CMake >= 3.5 due to dropped legacy support
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Remove the needless restriction
for which auxillary files are installed.
This aligns the behavior of libtoolize
with the existing behavior of automake.
This can prevent the seemingly random error
if autoreconf happens to be ran multiple times:
configure: error: cannot find required auxiliary files: compile
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19748
Signed-off-by: Robert Marko <robimarko@gmail.com>
The new "std-gnu23" module has the stated goal of:
"...to update the c99 module to depend on std-gnu23
instead of on std-gnu11, and to make std-gnu11 obsolete."
in upstream commit 8990abb50 ("std-gnu23: new module").
However, for now, it's design is optional, so that
definitions of the latest standard module overrides the former.
At some point, upstream gnulib will replace the dependency
instead of add it alongside the older one.
Because all macros are copied to the aclocal directory,
for complex projects, not including the module
may cause the macros to apply only to some subdirectories
rather than all of them and top-level together.
For projects that import source from local gnulib,
always include the std-gnu23.m4 macros for consistency.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19748
Signed-off-by: Robert Marko <robimarko@gmail.com>
Invalid hash was added during the 5.3 update and CI will fail since none
of the available sources has the tarball with incorrect hash.
Fixes: 423ed9fc5a ("tools: bash: update to 5.3")
Signed-off-by: Robert Marko <robimarko@gmail.com>
After eliminating the possibility of automake having a bug
by testing a revert to the recent updates to automake,
the problems regarding autoreconf with some packages
was bisected to the gnulib update instead, through aclocal macros.
With the new module, std-gnu23, some packages are failing build
due to both the host compiler and cross compiler being tested for
availability of C23 standard features with the configure script.
The results of one is being cached and used for the other,
while the two compilers are different versions and may or may not
both support C23 options and would otherwise have conflicting results.
A similar patch may have to be done
for the next release of Autoconf
if upstream GNU does not accept this solution.
Reported-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19627
Signed-off-by: Nick Hainke <vincent@systemli.org>
Similar to several GNU tools, util-linux when built using meson
is configured by default to error when 64-bit time is not supported.
To solve this in the same way as standard configure scripts,
check for 64-bit time support ahead of time,
and allow 32-bit time when not supported.
In the future, the YEAR_2038 variable
can be used as a build prerequisite
instead of being used for configuration.
Ref: 39e8ef33bf ("build: add test for 64-bit time support")
Fixes: e15d5cf752 ("tools/util-linux: build with meson")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19617
Signed-off-by: Nick Hainke <vincent@systemli.org>
Simplifies Makefile by quite a bit.
Added an upstream backport fixing compilation with older OS.
Added a curses patch so -Dauto_features=disabled can work properly.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19598
Signed-off-by: Nick Hainke <vincent@systemli.org>
There is a clobbering between bison and gnulib for installing
the macro file bison-i18n.m4 where gnulib has a newer version
while bison will replace it with an outdated version if built afterward.
Other builds depend on the changes made to the bison-i18n.m4 file and are
only included using aclocal unless other modifications are made in each case
in order to force imported macros from gnulib to override aclocal macros.
Gnulib is integrated within bison, however it is not with a bootstrap script
and there is already a reverse dependency between the two, where bison
is indirectly required for gnulib to start building. Therefore, do not allow
the building or cleaning of bison to install or uninstall m4 files.
Reported-by: Tianling Shen <cnsztl@immortalwrt.org>
Fixes: d19f8bc199 ("tools/gnulib: update to branch stable-202501")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19606
Signed-off-by: Nick Hainke <vincent@systemli.org>
util-linux needs to be refreshed, so do so.
Fixes: 4fd6117129 ("tools/util-linux: fix libuuid linking")
Signed-off-by: Robert Marko <robimarko@gmail.com>
The pkgconfig file that autotools uses is wrong for static libraries.
meson does the right thing but for static libraries, .private entries
need to move to non .private.
Fixes compilation with at least mtd-utils.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19597
Signed-off-by: Robert Marko <robimarko@gmail.com>
Even though expat is a C library, the configure script tests both C and
C++ compilers so a fix is needed for the latter.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19594
Signed-off-by: Robert Marko <robimarko@gmail.com>
It seems that, for whatever reason in this case,
the function "vardef ($var, $cond)" does not work
while "$var->def ($cond)" does work for conditionals.
Also, do not define it conditionally when defined unconditionally.
Even though the reordering patch would make that functionally sound,
it still throws a warning which can cause a build to fail
when warnings are treated as errors.
Instead, just add BUILT_SOURCES to every existing case
rather than only when BUILT_SOURCES is defined.
Fixes: 6d2bfe50d3 ("tools/automake: control all cleaning with clean variables")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/19593
Signed-off-by: Robert Marko <robimarko@gmail.com>
automake update to 1.18 broke buildbots as we dont have makeinfo host tool
present, after investigation this was an automake regression that was fixed
in 1.18.1[1].
So, since 1.18.1 contains small number of fixes, update to it instead of
just backporting the single commit.
[1] https://cgit.git.savannah.gnu.org/cgit/automake.git/commit/?id=9b92240af4a8f7a3050c13adec367cf48e9ce063
Fixes: d7d0205940 ("tools/automake: update to 1.18")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update to the latest stable release
with the new API versions for binaries.
The temporary patching of shebangs is no longer necessary
since the whitespace check has been changed to a warning.
Part of a patch was upstreamed and therefore removed.
Manually adjusted patch:
- 000-relocatable.patch
- 101-do-not-require-files.patch
All other patches are automatically refreshed.
Link: https://lists.gnu.org/archive/html/autotools-announce/2025-05/msg00001.html
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The latest versions of gettext rely on several changes to gnulib
including both changes to modules and new modules
and some previously gettext specific code being moved to gnulib.
Backport these changes in order to allow updating gettext
while using the local gnulib copy of sources.
Add patch:
- 640-mem-hash-map.patch
- 645-next-prime.patch
- 646-hashcode-string.patch
- 647-hashkey-string.patch
- 650-package-version.patch
- 651-package-version-simplify.patch
- 652-package-version-simplify-further.patch
- 653-package-version-warning.patch
- 660-version-stamp.patch
- 689-vc-mtime.patch
- 755-clean-temp-hashkey.patch
- 795-string-desc-rename-functions.patch
- 796-vc-mtime-less-read.patch
- 797-vc-mtime-add-api.patch
- 798-vc-mtime-add-api.patch
- 799-vc-mtime-old-git.patch
- 900-str_startswith-module.patch
- 901-str_endswith-module.patch
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Move to the June 2025 update of the first 2025 stable branch
in order to better support updating gettext to the latest versions.
More instances of blocking the defining of functions
that use reallocarray() is needed for portability with macOS
as more similar functions have been added.
And one instance is removed as the function was removed.
Refer to a previous commit to explain the need for this.
Manually adjusted patch:
- 150-portable-tdestroy.patch
- 160-flag-reallocarray.patch
- 200-force-disable-after-configure.patch
Removed upstreamed patch:
- 500-acl-function-name.patch
All other patches are automatically refreshed.
Ref: 5ade7ee60 ("tools/gnulib: add macros to skip reallocarray() functions")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
There are multiple subdirectories for elfutils
and more than one is not dependent on another,
so enabling parallel building can save time
if multiple cores are available.
The change in build time for the package
is as much as 20% when cores are not in use by other jobs.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The original patch series partially added by commit
f97da2c61 ("tools/elfutils: add missing MIPS reloc support")
now has a v3 which has half of it's commits accepted.
To prepare for updating to the new release,
use the new series that includes backports.
Manually adjusted patch:
- 010-backport-mips-support-reloc.patch
Add patch:
- 011-backport-mips-support-strip.patch
- 012-backport-mips-support-readelf.patch
- 013-backport-mips-support-elflint.patch
- 014-backport-mips-support-stack.patch
- 015-backport-mips-support-regs.patch
Tested-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the clean recipe during build, so that files already
generated by the bootstrapping within the release are removed
before the bootstrap script is run again.
Automake with modified rules must be ran
in order to generate a Makefile that does delete itself or libtool.
In order to enable rules for building what is removed,
maintainer mode is required for configuring.
Building from tracked sources only with maintainer mode
requires a lexical analyzer, so add dependency for bison.
Override an automake variable "am__CONFIG_DISTCLEAN_FILES"
in order to prevent removing config.status and other configure files
so that configure stage does not need to be ran twice.
The function obstack_printf() is not present on macOS,
so use the available gnulib module and their dependencies.
Many more modules from gnulib are now needed,
and some replacements of some functions must be skipped
to prevent build errors at link time.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
These patches will be present in version 0.192 release.
Include them before the update
to support changes before updating
and in order to have a more organized git history.
Manually refreshed patch:
- 110-objects-manifest.patch
Add patch:
- 095-src-unused-variable.patch
- 096-lib-config_h.patch
- 097-libcpu-config_h.patch
- 098-libdw-maintainer-clean.patch
- 099-remove-unlocked-stdio.patch
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
In order to solve the problem of the possibility that
the "stack" binary is incorrectly included as a header
while the compiler looks for the standard C++ header "stack",
a workaround forcing a dependency between building "stack"
and the C++ program was introduced.
This upstream fix uses the compiler "-iquote" option
in order to avoid looking for standard headers
in the current working directory
and blocks the default inclusion of "-I ."
to the compiler flags.
The upstream fix happens to be incomplete,
so add an extra patch to fix an additional instance
and then remove the workaround.
Also, adjust the way DEFAULT_INCLUDES is overridden
in the build Makefile by using the "-iquote" option
in the same manner in order to remove all instances
of the default inclusion for the current directory.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
For the building of some packages, it is helpful
to completely clean the packaged release copy of the source,
however this usually deletes libtool if used,
otherwise causing the need to run the bootstrap script twice.
Not deleting libtool allows compilation to continue directly
after cleaning pre-generated files in the package distribution.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The install stage of util-linux uses the install utility
with GNU options which is provided to macOS by coreutils.
Before, Make coincidentally built them in the right order,
this makes the prerequisite explicit.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The install stage of findutils uses the install utility
with GNU options which is provided to macOS by coreutils.
Before, Make coincidentally built them in the right order,
this makes the prerequisite explicit.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The version of the rmdir utility in macOS is POSIX-only
while elfutils uses the GNU extended options while building.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Include the coreutils utilities required for macOS
and other non-GNU friendly OSs to products like the SDK.
This also allows manually building coreutils on Linux
without having to manually edit this Makefile.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the rmdir utility provided by GNU coreutils for macOS
in order to be able to use the option "--ignore-fail-on-non-empty".
Some other tools such as elfutils use this while building.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Before building, symlinks are made from existing utilities
on the host machine, because they are necessary before
coreutils can be built.
Instead of leaving these utilities as symlinks,
replace them with the copy provided by the coreutils build
in order to increase version control for these utilities
and to have a real copy for targets like the SDK.
The utilities required before building and provided by coreutils are
cp, install, realpath, seq, and stat.
Let all of the utilities be installed with the "g" prefix,
then, existing symlinks named without the "g" prefix are safely replaced
with a new symlink using the coreutils version of `ln` just built
in order to prevent an inconsistent state of the file
since these utilities must always be available.
While at it, sort the list alphabetically.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
GNU coreutils is a unique case where we require
some of the utilities on the host machine
before anything is built.
The prerequisite is handled by symlinks to the host binaries
in the staging directory that are installed
by the build system and that are expected to remain
as long as the corresponding stampfile exists.
Because the binaries built by coreutils
will replace the symlinks, the uninstall target
will actually delete the symlinks
long before the build finishes whenever it is ran.
This can cause the utilities to be temporarily missing
from the controlled part of the shell's PATH,
so disable the removal of the coreutils utilities.
The appropriate way to clear all of the programs and links
would be `make dirclean`.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the clean recipe during build, so that files already
generated by the bootstrapping within the release are removed
before the bootstrap script is run again.
Automake with modified rules must be ran
in order to generate a Makefile that does not delete itself.
Override an automake variable "am__CONFIG_DISTCLEAN_FILES"
in order to prevent removing config.status and other configure files
so that configure stage does not need to be ran twice.
Redefine MAINTAINERCLEANFILES with Make functions
to avoid deleting the targets of gettext and gperf rules.
In order to prevent an inconsistent state of `install`
since this utility must always be available as a prerequisite,
do not allow it to be removed.
Instead of preventing the removal of the config.h header,
the Makefile supports regenerating it quickly.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
This was previously not possible because
part of the source code for coreutils in the form of
extra gnulib modules was missing from the release distribution.
Now that the local modules from coreutils source
is included in coreutils releases,
the bootstrap script can be ran without skipping
automake in the autoreconf stage after importing modules
by using fake paths to each autotools program,
and instead use the real paths to our modified autotools.
Because we do not require tools for building documentation,
continue to fake the paths to autopoint and gtkdocize.
Remove the skipping of imports of some source files
which is no longer necessary.
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update to the next stable release.
Prevent the need for gperf to build
gperf based headers due to new gnulib versions
by skipping replacement of gperf files.
Without Automake, there are some
existing macro conflicts
due to the new version of gnulib,
causing build errors with some source files,
so skip those file replacements.
All patches are automatically refreshed.
Link: https://lists.gnu.org/archive/html/coreutils/2025-01/msg00049.html
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The bootstrap configuration is set to require
gettext and gperf for regenerating documentation and headers.
However, these steps are skipped in favor
of not building documentation and using existing headers.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Automake previously makes rules for the target maintainer-clean
to remove both the contents of MAINTAINERCLEANFILES and BUILT_SOURCES.
In order to have finer control over what is removed,
let there only be a rule for deleting MAINTAINERCLEANFILES,
and set MAINTAINERCLEANFILES to a default value of BUILT_SOURCES
if only conditional or missing, and append BUILT_SOURCES if user-defined.
In order to maintain conditional values for MAINTAINERCLEANFILES
while keeping a default value, change the behavior of automake
to output unconditional definitions before conditions.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
There is only one subdirectory for libtool that actually compiles,
so enabling parallel building has no significant beneficial effects.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the clean recipe during build, so that files already
generated by the bootstrapping within the release are removed
before the bootstrap script is run again.
Override an automake variable "am__CONFIG_DISTCLEAN_FILES"
and related variables for their dependencies
in order to prevent removing config.status and other configure files
so that configure stage does not need to be ran twice.
Automake with modified rules must be ran
in order to generate a Makefile that does not delete itself.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
For the building of some packages, it is sometimes helpful
to completely clean the packaged release copy of the source,
however this usually both requires and deletes the Makefile,
causing the need to run the configure stage twice.
Not deleting the Makefile allows compilation to continue directly
after cleaning pre-generated files in the package distribution.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Snapshot downloads, whether from GNU cgit or GNU gitweb,
are becoming more unreliable and unstable.
Use the GNU gnulib git repository server for downloads
because GNU has disabled cgit server snapshots due to performance issues.
Other possible options include GNU gitweb snapshot or a git bundle download
but these methods either may also have similar performance issues
or require additions to the build system to handle the method
beyond the previous commit.
In case snapshots are to be used again for build tools in the future,
the previous commit reduces the tarball generation attempts
for the original source of snapshots in order to reduce server impact.
A conversation regarding server performance issues and alternatives is linked.
Link: https://lists.gnu.org/archive/html/bug-gnulib/2024-12/msg00124.html
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The python implementation of gnulib-tool
uses a hidden file as the independent main function.
A copy with glob ('*') does not include hidden files
at the top level directory, so use whole directory copy
instead and remove the patch for a non-hidden python file.
Ensure the directory does not already exist
by attempting uninstall first to remove it
and by not using "install" to create a directory.
Rename the clean target to uninstall, as it handles
the staging directory and not the build directory.
Removed:
- 021-python-main.patch
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump to the next stable branch with the May 2025 update.
Add a patch to compensate for gnulib-tool being further split up
into independent shell and python implementations
by using a non-hidden version of the main.py file.
Add a patch for the python implementation of gnulib-tool
in order to ignore the required version of autoconf in configure.ac
being lower than the required version of autoconf for gnulib
if the version that is being run exceeds the required version for both,
and adjust existing autoconf version shell script patch to new filename.
Backport a patch for a change in function naming convention
for forward compatibility with tool releases after this stable branch.
Added:
- 020-python-version.patch
- 021-python-main.patch
- 500-acl-function-name.patch
Manually Adjusted:
- 010-autoconf-version.patch
- 160-flag-reallocarray.patch
Existing patches are automatically refreshed.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update to the latest stable release.
This is the automake API that newer packages
such as libtool 2.5.4 is bootstrapped with,
and is required for bootstrapping it again.
Manually Adjusted:
- 000-relocatable.patch
All other patches are automatically refreshed.
Link: https://lists.gnu.org/archive/html/autotools-announce/2024-07/msg00000.html
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The latest automake version 1.17 includes a restriction against whitespace
for the configure variable $PERL, which is set to "/usr/bin/env perl"
for portability reasons with products like the SDK.
Instead of waiting until the next version of automake is released
for this error to be converted to a warning,
set the shebang of automake and aclocal manually with a patch.
In past git history, these lines have been patched before,
but only to remove the "-w" flag in favor of setting global warnings
in the script itself so that env does not strip the option.
The other purposes of Perl during building can use
the static staging directory path without any limitations.
Also, the configure variable "am_cv_prog_PERL_ithreads"
for the detection of Perl threads support
has been removed since 2013 in favor of dynamic runtime detection.
Remove our manual setting of this variable value as it has no effect.
Ref: 1ef07eee4 ("automake: forcibly disable perl ithreads support")
Ref: 182626687 ("ithreads: use runtime (not configure time) detection of perl threads") # automake.git
Ref: f6c581cc3 ("automake: portability fixes")
Ref: 87f3365d9 ("Revert "tools/automake: bump to 1.17"")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a patch in order to remove an obsolete workaround
that is currently causing issues on some macOS systems.
Add patch:
- 000-getopt-prototype.patch
Tested-by: Georgi Valkov <gvalkov@gmail.com> # macOS
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
Instead of editing the SUBDIRS variable with a patch,
it can be overriden at the end of the command line when invoking Make.
Also, remove use of autoreconf, as this patch
was the only one that made it necessary.
Removed:
- 001-no_doc.patch
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
The remaining changes in this patch to the configure script
has no effect at all since autoreconf is used with bc
and the recent update to bc removed the need to patch
the original set of changes in order to fix building.
Remove the patch.
Removed:
- 002-fix-libmath.patch
Fixes: abd424c3e ("tools/bc: update to 1.08.1")
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Link: https://github.com/openwrt/openwrt/pull/16522
Signed-off-by: Robert Marko <robimarko@gmail.com>
075cdc0 iptime-crc32: add support for ipTIME AX3000Q
48ababa iptime-crc32: add support for ipTIME AX3000SM
f29de74 iptime-crc32: Add device support for ipTIME AX6000M
Link: https://github.com/openwrt/openwrt/pull/19520
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to latest version. All patches are automatically refreshed.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19341
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add erofs-utils to create an EROFS-based rootfs for image generation.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://github.com/openwrt/openwrt/pull/19244
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This backports upstream commit 05a895b3f996[1] to fix
compilation when using musl on the host machine.
[1]: 05a895b3f9
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/19285
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update to the latest version.
Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/19143
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This new version introduced parallel file reading, which will
greatly improve the IO performance. OpenWrt only uses GZIP
and XZ compression, hence the LZ4, LZO and ZSTD compression
algorithms were explicitly disabled.
Upstreamed patches:
001-xz_wrapper-support-multiple-lzma-configuration-optio.patch[1]
002-xz_wrapper-make-new-OpenWrt-extended-options-non-def.patch[2]
Release Notes:
https://github.com/plougher/squashfs-tools/releases/tag/4.7
[1] dcb976fe4e
[2] 5fb9fdfb87
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19019
Signed-off-by: Nick Hainke <vincent@systemli.org>
There are no patches that need to be refreshed.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/19020
Signed-off-by: Nick Hainke <vincent@systemli.org>
It seems that MOLD_MOSTLY_STATIC was required before to avoid packaging
every single dependency. But nowadays, mold uses whatever dependency it
can find and builds its own if it cannot.
Saves a small amount of compilation time.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18881
Signed-off-by: Robert Marko <robimarko@gmail.com>
It's using cmake.mk so it needs CMake to build.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18880
Signed-off-by: Robert Marko <robimarko@gmail.com>
Newer GCC and Clang default to C++17, which does not support register.
Just remove it.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18859
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
New m4 release was made after a long time, for us most importantly
it ships newer gnulib so it compiles against GCC15 without forcing GNU17.
* Noteworthy changes in release 1.4.20 (2025-05-10) [stable]
** Fix a bug in the `eval' builtin where it does not suppress warnings
about division by zero that occurs within a more complex expression on
the right hand side of || or && (present since short-circuiting was
introduced in 1.4.8b).
** The `syscmd' and `esyscmd' builtins no longer mishandle a command line
starting with `-' or `+' (present since "the beginning").
** Fix regression introduced in 1.4.19 where trace output (such as with
`debugmode(t)') could read invalid memory when tracing a series of
pushed macros that are popped during argument collection.
** Fix regression introduced in 1.4.19 where the `format' builtin
inadvertently took on locale-dependent parsing and output of floating
point numbers as a side-effect of introducing message translations.
While it would be nice for m4 to be fully locale-aware, such a behavior
change belongs in a major version release such as 1.6, and not a minor
release.
** Fix regression introduced in 1.4.11 where the experimental `changeword'
builtin could cause a crash if given a regex that does not match all
one-byte prefixes of valid longer matches. As a reminder, `changeword'
is not recommended for production use, and will likely not be present
in the next major version release.
** On non-Unix platforms where binary files differ from text, loading a
frozen file (which should be cross-platform compatible) now correctly
uses binary mode.
** Several documentation improvements to the manual.
** Update to comply with newer C standards, and inherit portability
improvements from gnulib.
Link: https://github.com/openwrt/openwrt/pull/18821
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update b43-tools to the latest upstream version to fix a
compilation error with C23:
util.h:25:15: error: 'bool' cannot be defined via 'typedef'
25 | typedef _Bool bool;
| ^~~~
Changelog:
c6fc53f replace custom bool typedef with <stdbool.h>
dadf30c fix format warning in compilation
2fe10ea b43-fwdump: Fix forwarding of arguments to disassembler
Link: https://github.com/openwrt/openwrt/pull/18708
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update libtool to the current stable 2.5.4 release.
130-trailingslash.patch was upstream, 100 and 110 patches were
manually refreshed while rest was automatically refreshed via quilt.
Link: https://github.com/openwrt/openwrt/pull/18655
Signed-off-by: Robert Marko <robimarko@gmail.com>
13767a9 make_ext4fs: add missing space after LDFLAGS
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18682
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
mold has seen a bunch of bugfixes and improvements since 2.33.0, so
lets update it.
Link: https://github.com/openwrt/openwrt/pull/18575
Signed-off-by: Robert Marko <robimarko@gmail.com>
