Some options here were identified by running:
make kernel_oldconfig while others were manually added from a list
curated by hand at build time.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Wrap the crc32c dependency in !LINUX_6_18 to allow the package to
build correctly on 6.18-based targets.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
KERNEL_TESTING_PATCHVER:=6.18
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Include <linux/version.h> and use preprocessor checks to select the appropriate
prototype and definition for hc_wlan_data_bin_read. The third parameter of bin_attribute
read callbacks was changed to 'const struct bin_attribute *' in Linux 6.18; this
change prevents compilation errors on newer kernels while preserving compatibility
with older ones
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch silences compiler warnings about unused variables by explicitly
casting them to void where appropriate.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Partially reverse https://web.git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.18.y&id=39cfd5b12160be4f57df1c3ba60139741c827616
to prevent generation of empty modules.builtin.modinfo and modules.builtin
files that cause modules compilation errors.
If an out-of-tree package or any kernel-install rule ran modprobe xyz while
the build was still in progress, and xyz had been configured =y, a clean tree
would already have xyz listed in modules.builtin; with the empty file produced
by the buggy rule it was missing, so modprobe emitted "module xyz not found"
even though the code was sitting inside the freshly built vmlinux.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes the "Unsupported UART type 4" error by adding support
for the UPIO_AU I/O type in set_io_from_upio() (used by Au1x00 and
RT288x). It assigns the correct serial input/output functions
(io_serial_in, io_serial_out) for proper operation when UPIO_AU is
configured.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport minor fixes for the eip93 driver from upstream.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch set introduces support for using the in-tree (mainline)
EIP93 crypto driver for kernel 6.18 and later, along with additional
improvements and fixes:
- Conditional Kconfig/Makefile handling for crypto-hw-eip93 to enable use of the mainline driver with kernel 6.18+.
- Patch 926: Use software AES fallback for small requests in the EIP93 driver.
- Patch 927: Add `mediatek,mtk-eip93` compatible string for upstream kernel device trees.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
- change phy_driver_register and phy_driver_unregister function calls
to phy_drivers_register and phy_drivers_unregister for compatibility
with kernel 6.18
- replace PHY_ANY_ID with "MATCH ANY PHY"
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove symbols no longer present in version 6.18,
add new 6.18 kernel symbols.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/hack-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/pending-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/backport-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove obsolete backport patches already included in kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add define for kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
On qca8k multi-CPU-port setups (e.g. qca8337 with ports 0+6 as CPU),
bridging switch user ports that use different conduits can make the host
reachable only from the ports tied to the last-programmed CPU port.
Add a pending kernel patch which makes qca8k merge CPU/DSA-port FDB
programming, so host FDB entries end up on all relevant CPU ports.
Fixes: openwrt/openwrt#17891
Signed-off-by: Kevin Staley <glaciertablet@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21317
Signed-off-by: Robert Marko <robimarko@gmail.com>
rtmdio_probe() is a do-it-all setup function. It creates one
control structure and one bus. In the future multiple busses
will be created. As a preparation carve out the bus specific
part into an individual probing function.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
Until now the central control structure is allocated via a call to
devm_mdiobus_alloc_size(). This will not be possible any longer when
multiple busses will be implemented in a future commit.
Relax that as follows:
- Define a new private "channel" structure for a mdio bus
- Allocate the central control structure with a dedicated alloc()
- Allocate only the channel structure during bus setup
- Link the channel to the central structure via chan->ctrl
Reorganize the probing function so that it becomes clearer that
the control structure is setup first and afterwards the bus is
registered.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add a new helper macro rtmdio_ctrl_from_bus that encapuslates
the current ctrl=bus->priv lookup. This is a preparation for
the future multi-channel driver architecture. With an upcoming
commit the structures will be changed as follows:
- ctrl: contains the generic data structurs
- chan: contains the channel specific structure
This will involve changing the pointers between them
old lookup chain: ctrl = bus->ctrl
new lookup chain: ctrl = bus->chan->ctrl
The helper macro allows to easily switch the lookup in one
central location. While we are here fix a whitespace issue.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The topology setup is bus independent and can be derived completely
from the control structure. Adapt the call parameters accordingly.
The call location is quite confusing at the moment. Being no longer
dependent from the bus call it where it makes most sense. This is
directly after the mapping setup in rtmdio_map_ports(). Doing other
bus dependent setup between these two functions is not needed
any longer.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The port specific attributes of the central control structure
have been moved over to a separate port structure. Do the same
for the (up to 4) busses. Establish a separate bus structure
that will hold data about each bus and use it in the control
structure. As a first usage type move the is_c45 attribute over.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The phy_node attribute is defined per port. Move it into the new
port structure. Now it is clear that it belongs to the port.
While we are here rename it to dn (aka device_node) to align with
upstream style. As all usage locations must be adapted it makes
no sense to make two commits (relocate/rename) to change the
code twice.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The smi_addr attribute is defined per port. Move it into the new
port structure. As the devices have a maximum of 56 addresses
save some space and convert it to type u8.
While we are here harden the mapping routine that reads these
addresses from the DTS. For this check the value that is read into
smi_addr. This is usually the MDIO standard 0..31. Sadly RTL839x
devices are an exception from that and allow addresses 0..51.
To avoid device specific if/then/else cases for now implement
a "light" consistency check.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The smi_bus attribute is defined per port. Move it into the new
port structure. As the devices have a maximum of 4 busses save
some space and convert it to type u8.
While we are here fix a whitespace issue and rename the helper
variable in rtmdio_map_ports() to smi_bus to align with the
structure attribute.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The raw attribute is defined per port. Move it into the new
port structure.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
The central control structure of the mdio bus holds several
attributes. These target two different objects. Some of them
are for the (up to 56) controller ports, some of them are for
the (up to 4) controller busses.
Establish a separate port structure that will hold data about
each port and use it in the control structure. As a first
usage type move the page attribute over.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22604
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport upstream driver and apply pending downstream patches to
support using the MaxLinear MxL86252 and MxL86282 switches.
The driver supports a native proprietary 8-byte DSA special tag format
(mxl862xx) as well as using an 802.1Q-based DSA tag (mxl862xx-8021q).
All basic bridge, VLAN and LAG operations are supported. A single port
can be used as mirror port. Hardware counters are made available as
ethtool stats or directly serve as interface counters (bytes,
packets).
The switch runs a complex ZephyrOS-based firmware on an integrated
ARC microcontroller, the driver uses the firmware management API over
MDIO to interact with the switch hardware.
Note that the firmware needs to be rather recent (WSP 1.0.78 or later)
to work well with this driver. It can be updated at runtime using devlink.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Add IPQ8074 support to the upstream CMN PLL driver. The CMN PLL block
is identical to IPQ6018 with the same output clocks (bias_pll_cc_clk
at 300 MHz and bias_pll_nss_noc_clk at 416.5 MHz).
Signed-off-by: John Crispin <john@phrozen.org>
Add IPQ6018 support to the upstream CMN PLL driver. The CMN PLL at
0x9b000 generates the 12 GHz base clock feeding the networking
subsystem. Its output clocks (bias_pll_cc_clk at 300 MHz and
bias_pll_nss_noc_clk at 416.5 MHz) replace the previous fixed-clock
stubs and are found by GCC via global clock name lookup.
Signed-off-by: John Crispin <john@phrozen.org>
The XO clock source is always-on in hardware and cannot be gated.
Without CLK_IS_CRITICAL, the CMN PLL runtime PM suspend cascades a
disable up to gcc_xo_clk_src, causing a branch status timeout warning.
The IPQ8074 GCC driver already marks this clock as critical.
Signed-off-by: John Crispin <john@phrozen.org>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000h-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000e-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000s-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
This allows us to use the full size of nand,
which extends ubi size from 64Mb to 122.25Mb.
1. Log in to the device and backup all the partitions,
especially unique "Factory" and "bdata" partitions
from System -> Backup / Flash Firmware -> Save mtdblock contents.
2. Install kmod-mtd-rw to unlock mtd partitions for writing
apk update && apk add kmod-mtd-rw && insmod mtd-rw i_want_a_brick=1
3. Write new OpenWrt (U-Boot Layout) "BL2" and "FIP":
mtd -e BL2 write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-preloader.bin BL2
mtd -e FIP write openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-bl31-uboot.fip FIP
4. Set static IP on your PC: "192.168.1.254", gateway "192.168.1.1"
5. Serve openwrt-mediatek-filogic-cudy_wr3000p-v1-ubootmod-initramfs-recovery.itb
using TFTP server.
6. Connect Router LAN with PC LAN.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt initramfs recovery has booted,
clean "/dev/mtd5" ubi partition to utilize maximum of free space:
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
9. Perform sysupgrade.
Signed-off-by: Dmitry Mostovoy <stavultras@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21943
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use the common driver prefix for these two functions.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Check for dev in driver remove gives no additional security. The
remove() function is only called if probe() succeeded. Probing
will always call platform_set_drvdata() in the good case. So
remove() will always find dev data via platform_get_drvdata().
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The ethernet driver is only loaded via devicetree and makes use
of of_match_table. In this case the probing function is only
called if a matching compatible is set. So pdev->dev.of_node
can never be NULL.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Align the driver and matchtable naming convention to the new
rteth prefix. While we are here autogenerate the module name
by using KBUILD_MODNAME. This is common upstream practice.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22610
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit d52f7a4ca5 ("realtek: dts: new SWITCH_PORT_LED() macro") introduced
a new macro to simplify switch port definitions and introduces usage of
it for Zyxel XGS1X10-12 devices. However, this change added a DTS syntax
issue because:
> SWITCH_PORT_LED(...);
produces
> port@XX { ... };;
because the macro already includes a trailing semicolon. The DT compiler
doesn't like this so it fails with syntax error. Fix this by dropping the
trailing semicolons after macro usages.
Fixes: d52f7a4ca5 ("realtek: dts: new SWITCH_PORT_LED() macro")
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22614
Signed-off-by: Robert Marko <robimarko@gmail.com>
