Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXqmiX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'qmi'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
(cherry picked from commit e83da3bada)
Link: https://github.com/openwrt/openwrt/pull/22254
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduce the devpath option to find the control channel device from a
hardware path for a USB or a WWAN device.
This option is useful when there are multiple modems connected to the
system. The name of the control channel device of a modem can change
depending on which modem initialises first or if it was recently plugged
in. The devpath option allows specifying the hardware path of the modem
where the control channel device will be found using that.
For the USB device hardware path, it is allowed to specify the USB port
number the modem is directly connected to.
If the device and devpath options are both set, devpath takes precedence
over device.
The USB device hardware path of a control channel device can be found by:
readlink -f /sys/class/usbmisc/cdc-wdmX/device
The WWAN device hardware path of a control channel device can be found by:
readlink -f /sys/class/wwan/wwanXmbimX/device
An example uci configuration would be:
config interface 'wwan_usb1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/1e1c0000.xhci/usb1/1-1'
option apn 'internet'
option pdptype 'ipv4v6'
Or:
config interface 'wwan_pcie1'
option proto 'mbim'
option auth 'none'
option devpath '/sys/devices/platform/soc/11280000.pcie/pci0003:00/0003:00:00.0/0003:01:00.0'
option apn 'internet'
option pdptype 'ipv4v6'
Signed-off-by: Chester A. Unal <chester.a.unal@arinc9.com>
(cherry picked from commit 764c503a2c)
Link: https://github.com/openwrt/openwrt/pull/22254
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
Specifications:
SOC: MT7986b
RAM: 512MB
Flash: 512 MB SPI NAND
Ports: 2 LAN 2.5Gbps (GPY211C)
WIFI: MT7976GN + MT7976AN
LED: 3 bicolor LED - 1 monocolor LED
Buttons: Reset and WPS
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Co-authored-by: Hal Martin <halmartin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 09a0462ea8)
Link: https://github.com/openwrt/openwrt/pull/22659
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This access point is a ‘friend’ of the T56 supplied by Odido but with DDR3 RAM and with two Ethernet 2.5 (GPY211)
The flash procedure is similar to other Zyxel T56/EX5600/EX5601
If you need backup please use the T56 guide
Please refer to https://openwrt.org/inbox/toh/zyxel/wx5600-t0 for detailed flash informations
We can install all with U-boot and mtk_uartboot.
Load Uboot:
```
./mtk_uartboot -a -p ./mt7986-ram-ddr3-bl2.bin -s /dev/ttyUSB0 -f openwrt-mediatek-filogic-zyxel_wx5600-t0-ubootmod-bl31-uboot.fip
```
**WARNING: Please use a GBIT ethernet or force it on system**
**WARNING: Please use only LAN2 port in Uboot**
Press 0 on Bootmenu
```
mtd erase ubi
run ubi_format
bootmenu
```
Load and write BL2 and U-boot:
```
8
7
```
Load and write recovery and production
```
6
5
```
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Link: https://github.com/openwrt/openwrt/pull/18364
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit 1dbb2d55ac)
Link: https://github.com/openwrt/openwrt/pull/22659
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add menuconfig options to include modules for (virtio) vsockets. These are
used when running as Guest OS in a VM.
OpenWRT can be run in a vm (mostly commonly on the x86/64 and armsr
targets). Often it is convenient to have some sort of guest agent running,
to ease communication from host to guest.
Virtual Sockets provide this communication channel.
Virtio is a transport for this communication channel.
Virtual Sockets over virtio are for example used by Incus.
Virtual Sockets in general are used by most hypervisors, including VMware,
Hyper-V, and libvirt (qemu). These may need other transport-specific
modules not included in this commit.
Signed-off-by: Mathijs Rietbergen <mathijs.rietbergen@proton.me>
Link: https://github.com/openwrt/openwrt/pull/21392
(cherry picked from commit c88e8a9816)
Link: https://github.com/openwrt/openwrt/pull/22602
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
If the user removes all /lib/apk/packages/*.conffiles* files to prevent
sysupgrade from preserving configuration, the glob no longer matches and
sysupgrade ends up calling cat on a non-existent path:
cat: can't open '/lib/apk/packages/*.conffiles_static': No such file or directory
Fix this by using find cmd.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Link: https://github.com/openwrt/openwrt/pull/22071
(cherry picked from commit 10db6fc26e)
Link: https://github.com/openwrt/openwrt/pull/22566
Signed-off-by: Robert Marko <robimarko@gmail.com>
Modern gawk rejects C-style /* ... */ comments in AWK code, treating
them as regex patterns where '*' has nothing to quantify. Replace all
such comments with AWK-style '#' comments in lantiq_bdi_conf.awk and
lantiq_ram_init_uart.awk.
Also replace the pattern 'if (x) /* comment */ else action' which used
a C comment as a null statement with the equivalent 'if (!x) action'.
Fixes build error:
awk: error: ? * + or {interval} not preceded by valid subpattern
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22458
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 9b1f73ec31)
"qca,gpio-mask" used to be read between ath9k_hw_init() and
ath9k_init_queues(). After 12913c3c56
it is read in ath9k_of_init(), but it gets overwritten by
ath9k_gpio_cap_init() during the call of ath9k_hw_init(), and causes
https://github.com/openwrt/openwrt/issues/22340
If keeping the most of 12913c3c56,
ath9k_gpio_cap_init() could be patched to keep the existing non-zero
gpio mask (coming from device tree).
Tested on Netgear WNDR4500 v3:
[ 22.558083] ath9k 0000:00:00.0: enabling device (0000 -> 0002)
[ 22.569548] ath: phy1: Use overridden gpio mask 0xf6ff
Signed-off-by: Edward Chow <equu@openmail.cc>
Link: https://github.com/openwrt/openwrt/pull/22376
(cherry picked from commit a1f5273)
Link: https://github.com/openwrt/openwrt/pull/22508
Signed-off-by: Robert Marko <robimarko@gmail.com>
The hostapd configuration for SU-BEAMFORMEE was incorrectly using the
beamformer antenna count instead of the beamformee antenna count for the
[BF-ANTENNA-N] capability string.
Fix this by using config.beamformee_antennas instead.
Signed-off-by: Andrew Sim <andrewsimz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22511
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit fc5aed2ff2)
This is nearly identical to what landed in ath-next for v7.1, aside from
resolving a couple conflicts. A separate patch has been added to replace
CONFIG_THERMAL with CPTCFG_ATH12K_THERMAL so the setting may be enabled
via menuconfig (as is done with ath10k and ath11k).
Note that at this stage, throttling has not been implemented upstream,
hence the slight change in wording versus existing options.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Link: https://patch.msgid.link/20260223132622.43464-1-maharaja.kennadyrajan@oss.qualcomm.com
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/22280
(cherry picked from commit d85a332831)
Link: https://github.com/openwrt/openwrt/pull/22462
Signed-off-by: Robert Marko <robimarko@gmail.com>
After 02e2065203, it can happen that both,
[VHT160-80PLUS80] and [VHT160] are added to the vht_capab option in
an AP's hostapd.conf, which would cause a failure to start the AP.
Fix the logic in order to prevent such misconfiguration.
Fixes: #22481
Signed-off-by: Shine <4c.fce2@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22482
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit c949d0e6c6)
This reverts commit cf1c8c1f3a.
This accidentally bumped odhcp to the version from main branch instead
of using the 25.12 branch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
In order to keep a coherent set of dependencies of the packages in the
target specific packages (nonshared) in the stable 25.12.0 release
repositories and keep ImageBuilders and ASU functional, hard code the
abi-version used in that builbot phase1 run: "20260213".
*abi compatibility has not changed between 20260213 and 20260313 anyway.
Fixes: 8aac058ef0 ("libubox: update to Git HEAD (2026-03-13)")
Suggested-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Mario Andrés Pérez <mapb_@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22437
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
mt76 tracks the PSM state of a sta internally with a wcid flag. TX to
such clients is skipped based on the presence of this flag.
This flag was not added to the PS state notify handler for MT7915 chips.
Without this flag, mt76 queues pending frames to the hardware,
accounting for airtime when a PSM notification is received while in a TX
iteration.
Set the PS flag for the STA WCID to prevent this from happening. TX gets
skipped in presence of this flag.
Link: https://patchwork.kernel.org/project/linux-wireless/patch/20260313112502.2026974-1-mail@david-bauer.net/
Signed-off-by: David Bauer <mail@david-bauer.net>
* e3f6a41 main: exit 1 when showing the usage
* b17c31f main: exit 1 on getopt() errors
* e086664 lexer: fix a minor memleak in jp_get_token()/match_token()
* e5a07f4 main: defer processing until options are processed
* afe72ad main: usage spell fixes
Signed-off-by: Paul Spooren <mail@aparcar.org>
(cherry picked from commit 2c2cea8864)
58eb263 instance: don't print error in case cgroups are disabled
9baf019 instance: use positive error numbers for strerror()
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
(cherry picked from commit 5ba55feb10)
a52cdb354d13 dns: validate IPv4 record addresses
b798c24205b5 dns: validate IPv6 record addresses
a3dcb4adc635 dns: validate reverse dns query name lengths
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
(cherry picked from commit 8a7eb57ab8)
When the virtual package "uci-firewall" is installed, the choice
between "firewall" and "firewall4" is arbitrary, sometimes resulting
in one, sometimes the other.
Set the default variant on "firewall4" to make it the preferred
package when installed as a dependency.
Link: https://forum.openwrt.org/t/owut-openwrt-upgrade-tool/200035/1126
Signed-off-by: Eric Fahlgren <ericfahlgren@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22328
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 5d71d9a4be)
Allow reinstalling already-installed packages without a version change.
Only the named packages are reinstalled, not their dependencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
(cherry picked from commit 91cff1a6d3)
Several OpenWrt-related fixes are included in this release.
Drop upstreamed patches and refresh the rest.
Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
Link: https://github.com/openwrt/openwrt/pull/22240
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
(cherry picked from commit ed94d3eea7)
memcpy() with overlapping src and dest buffers is an undefined behavior
in C. In the current code, a ConfRej response is generated by copying
input data in-place, where the dest address is lower than the src.
This happens to work in practice because memcpy() forward-copies data,
matching the behavior of memmove() in this case.
However, if FORTIFY_SOURCE or Address Sanitizer is enabled, memcpy()
will detect the overlap at run time and abort the program.
Replace the memcpy() with memmove() to ensure a well-defined behavior.
Reported-by: Filippo Carletti <filippo.carletti@gmail.com>
MRU patch https://github.com/ppp-project/ppp/pull/573
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22286
(cherry picked from commit 1e9da9798a)
Link: https://github.com/openwrt/openwrt/pull/22318
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Removing tmp/ after having built base-files or toolchain currently
breaks rootfs generation:
$ rm -rf tmp
$ make V=w
...
make[2] package/install
cat: .../openwrt/tmp/base-files.version: No such file or directory
cat: .../openwrt/openwrt/tmp/libc.version: No such file or directory
ERROR: 'base-files=' is not a valid world dependency, format is name(@tag)([<>~=]version)
make[2]: *** [package/Makefile💯 package/install] Error 99
The only way to recover from here is to clean toolchain and base-files via
$ make package/{base-files,toolchain}/clean
tmp is supposed to be ephemeral, so clearing it is an expected action,
which normally just triggers a regeneration of all files there.
Fix this by moving the version files to $(STAGING_DIR).
Fixes: 63e178f067 ("build: lock versions for special APK packages")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21803
Signed-off-by: Robert Marko <robimarko@gmail.com>
(cherry picked from commit a4e92f0484)
