GCC generates the same code for 24kc and 34kc. Since we have
converted all 34kc targets to the 24kc, it's better to switch
kernel -mtune to 24kc to avoid confusing developers.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22703
Signed-off-by: Robert Marko <robimarko@gmail.com>
We patch DMA_BUF to make it tristate, so once ALL_KMODS is selected it will
be built as a module even if previously disabled in the config.
So, since IO_URING_ZCRX does not depend on DMA_BUF linking will fail with:
aarch64-openwrt-linux-musl-ld: Unexpected GOT/PLT entries detected!
aarch64-openwrt-linux-musl-ld: Unexpected run-time procedure linkages detected!
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_release_dmabuf':
io_uring/zcrx.c:94:(.text+0x20): undefined reference to `dma_buf_unmap_attachment_unlocked'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:97:(.text+0x30): undefined reference to `dma_buf_detach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:99:(.text+0x3c): undefined reference to `dma_buf_put'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_import_dmabuf':
io_uring/zcrx.c:125:(.text+0x1b20): undefined reference to `dma_buf_get'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:132:(.text+0x1b34): undefined reference to `dma_buf_attach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:139:(.text+0x1b48): undefined reference to `dma_buf_map_attachment_unlocked'
make[6]: *** [scripts/Makefile.vmlinux:72: vmlinux.unstripped] Error 1
So, lets use IS_REACHABLE() to check for CONFIG_DMA_SHARED_BUFFER instead
to avoid adding a dependency to CONFIG_DMA_SHARED_BUFFER.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
All targets using ar8327 use OF.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22069
Signed-off-by: Robert Marko <robimarko@gmail.com>
Introduce fix which prevents the kernel from crashing in case the mxl862xx
driver fails to probe due to outdated firmware running on the switch.
Cancel all pending work and prevent rescheduling of counter polling in case
the driver errors out during probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CONFIG_TOOLS_SUPPORT_RELR is set during runtime by the kernel so it should
not end up in our static configs.
So, filter it out by default.
Signed-off-by: Robert Marko <robimarko@gmail.com>
If DSA support is enabled, then these will pop up.
So instead of ending up in target configs, add them to the generic configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
The signature of phylink_pcs get_state has changed, and we need to set
.supported_interfaces.
Both has been removed when backporting the driver to Linux 6.12, readd
to make it build and work with Linux 6.18.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/22668
Signed-off-by: Robert Marko <robimarko@gmail.com>
Include <linux/version.h> and use preprocessor checks to select the appropriate
prototype and definition for hc_wlan_data_bin_read. The third parameter of bin_attribute
read callbacks was changed to 'const struct bin_attribute *' in Linux 6.18; this
change prevents compilation errors on newer kernels while preserving compatibility
with older ones
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch silences compiler warnings about unused variables by explicitly
casting them to void where appropriate.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Partially reverse https://web.git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.18.y&id=39cfd5b12160be4f57df1c3ba60139741c827616
to prevent generation of empty modules.builtin.modinfo and modules.builtin
files that cause modules compilation errors.
If an out-of-tree package or any kernel-install rule ran modprobe xyz while
the build was still in progress, and xyz had been configured =y, a clean tree
would already have xyz listed in modules.builtin; with the empty file produced
by the buggy rule it was missing, so modprobe emitted "module xyz not found"
even though the code was sitting inside the freshly built vmlinux.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes the "Unsupported UART type 4" error by adding support
for the UPIO_AU I/O type in set_io_from_upio() (used by Au1x00 and
RT288x). It assigns the correct serial input/output functions
(io_serial_in, io_serial_out) for proper operation when UPIO_AU is
configured.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport minor fixes for the eip93 driver from upstream.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch set introduces support for using the in-tree (mainline)
EIP93 crypto driver for kernel 6.18 and later, along with additional
improvements and fixes:
- Conditional Kconfig/Makefile handling for crypto-hw-eip93 to enable use of the mainline driver with kernel 6.18+.
- Patch 926: Use software AES fallback for small requests in the EIP93 driver.
- Patch 927: Add `mediatek,mtk-eip93` compatible string for upstream kernel device trees.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
- change phy_driver_register and phy_driver_unregister function calls
to phy_drivers_register and phy_drivers_unregister for compatibility
with kernel 6.18
- replace PHY_ANY_ID with "MATCH ANY PHY"
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove symbols no longer present in version 6.18,
add new 6.18 kernel symbols.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/hack-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/pending-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/backport-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove obsolete backport patches already included in kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add define for kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
On qca8k multi-CPU-port setups (e.g. qca8337 with ports 0+6 as CPU),
bridging switch user ports that use different conduits can make the host
reachable only from the ports tied to the last-programmed CPU port.
Add a pending kernel patch which makes qca8k merge CPU/DSA-port FDB
programming, so host FDB entries end up on all relevant CPU ports.
Fixes: openwrt/openwrt#17891
Signed-off-by: Kevin Staley <glaciertablet@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21317
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport upstream driver and apply pending downstream patches to
support using the MaxLinear MxL86252 and MxL86282 switches.
The driver supports a native proprietary 8-byte DSA special tag format
(mxl862xx) as well as using an 802.1Q-based DSA tag (mxl862xx-8021q).
All basic bridge, VLAN and LAG operations are supported. A single port
can be used as mirror port. Hardware counters are made available as
ethtool stats or directly serve as interface counters (bytes,
packets).
The switch runs a complex ZephyrOS-based firmware on an integrated
ARC microcontroller, the driver uses the firmware management API over
MDIO to interact with the switch hardware.
Note that the firmware needs to be rather recent (WSP 1.0.78 or later)
to work well with this driver. It can be updated at runtime using devlink.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
FIPS 140-3 recommends that all crypto implementations should be tested
before first use. Testmanager performs initial tests based on existing
test vectors. Not all algorithms have defined test vectors, so to improve
this situation, this commit backports recently added test vectors for
following cipher suites:
* authenc(hmac(md5),cbc(des))
* authenc(hmac(md5),cbc(aes))
* authenc(hmac(sha1),rfc3686(ctr(aes)))
* authenc(hmac(sha224),rfc3686(ctr(aes)))
* authenc(hmac(sha256),rfc3686(ctr(aes)))
* authenc(hmac(sha384),rfc3686(ctr(aes)))
* authenc(hmac(sha512),rfc3686(ctr(aes)))
These vectors were calculated using a software implementation and then
double-checked on Mediatek MT7981/MT7986 (safexcel) and NXP P2020 (talitos).
Both platforms passed self-tests.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22409
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This patch adds support for the following AEAD ciphersuites:
- authenc(hmac(md5),cbc(aes))
- authenc(hmac(md5),cbc(des)))
- authenc(hmac(md5),cbc(des3_ede))
- authenc(hmac(md5),rfc3686(ctr(aes)))
These algorithms are used mainly for backward compatibility with some
older equipment. This is enhanced version of the patch found in the
mtk-openwrt-feeds repo.
All cipher suites were tested using test vectors on the MediaTek MT7981,
MT7986, and MT7988.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://github.com/openwrt/openwrt/pull/22410
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Upstream 2b81db8a7f4475e141a8ffd7cc745ed9f15962df introduced several new
symbols. This commit adds them and also applies alphabetical order via
./scripts/kconfig.pl target/linux/generic/config-6.12
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/22276
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport new field_prep()/get() particularly useful to handle case where a
bitmask is not const and FIELD_PREP can't be used. This permit to replace
manual shift with these macro. (also needed to permit backport of some
patch without modification)
Backport reworked patch that drop the local field_prep()/get() macro in
favor of the global one.
Link: https://github.com/openwrt/openwrt/pull/22479
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
