// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "rtl838x.dtsi"
#include "rtl83xx_d-link_dgs-1210_common.dtsi"
#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"

/ {
	compatible = "d-link,dgs-1210-10p", "realtek,rtl838x-soc";
	model = "D-Link DGS-1210-10P";

	/* i2c of the left SFP cage: port 9 */
	i2c0: i2c-gpio-0 {
		compatible = "i2c-gpio";
		sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		scl-gpios = <&gpio1 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <2>;
		#address-cells = <1>;
		#size-cells = <0>;
	};

	sfp0: sfp-p9 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c0>;
		los-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
	};

	/* i2c of the right SFP cage: port 10 */
	i2c1: i2c-gpio-1 {
		compatible = "i2c-gpio";
		sda-gpios = <&gpio1 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
		i2c-gpio,delay-us = <2>;
		#address-cells = <1>;
		#size-cells = <0>;
	};

	sfp1: sfp-p10 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c1>;
		los-gpio = <&gpio1 4 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
	};

	leds {
		link_act {
			label = "green:link_act";
			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
		};

		poe {
			label = "green:poe";
			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
		};

		poe_max {
			label = "yellow:poe_max";
			gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
		};
	};
};

&keys {
	mode {
		label = "mode";
		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
		linux,code = <KEY_LIGHTS_TOGGLE>;
	};
};

&uart1 {
	status = "okay";
};

&mdio_bus0 {
	PHY_C22(8, 8)
	PHY_C22(9, 9)
	PHY_C22(10, 10)
	PHY_C22(11, 11)
	PHY_C22(12, 12)
	PHY_C22(13, 13)
	PHY_C22(14, 14)
	PHY_C22(15, 15)
};

&switch0 {
	ethernet-ports {
		#address-cells = <1>;
		#size-cells = <0>;

		SWITCH_PORT(8, 1, internal)
		SWITCH_PORT(9, 2, internal)
		SWITCH_PORT(10, 3, internal)
		SWITCH_PORT(11, 4, internal)
		SWITCH_PORT(12, 5, internal)
		SWITCH_PORT(13, 6, internal)
		SWITCH_PORT(14, 7, internal)
		SWITCH_PORT(15, 8, internal)

		port@24 {
			reg = <24>;
			label = "lan9";
			pcs-handle = <&serdes4 0>;
			phy-mode = "1000base-x";
			managed = "in-band-status";
			sfp = <&sfp0>;
		};

		port@26 {
			reg = <26>;
			label = "lan10";
			pcs-handle = <&serdes5 0>;
			phy-mode = "1000base-x";
			managed = "in-band-status";
			sfp = <&sfp1>;
		};

		port@28 {
			ethernet = <&ethernet0>;
			reg = <28>;
			phy-mode = "internal";
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};