// SPDX-License-Identifier: GPL-2.0-or-later
/dts-v1/;

#include "rtl930x.dtsi"

#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	aliases {
		led-boot = &led_pwr_sys;
		led-failsafe = &led_pwr_sys;
		led-running = &led_pwr_sys;
		led-upgrade = &led_pwr_sys;
	};

	keys {
		compatible = "gpio-keys";

		mode {
			label = "reset";
			gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		pinctrl-names = "default";
		pinctrl-0 = <&pinmux_disable_sys_led>;

		led_pwr_sys: led-0 {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_POWER;
			gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
		};
	};

	sfp0: sfp-p12 {
		compatible = "sff,sfp";
		i2c-bus = <&i2c0>;
		los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>;
		tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>;
		mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>;
		tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
	};

	led_set: led_set {
		compatible = "realtek,rtl9300-leds";
		active-low;

		/* [Lime] [Amber] */
		led_set0 = <(RTL93XX_LED_SET_1G | RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)
			    (RTL93XX_LED_SET_100M | RTL93XX_LED_SET_10M | RTL93XX_LED_SET_LINK |
			     RTL93XX_LED_SET_ACT)>;

		/* [Blue?] [Lime] [Amber] [Green?] */
		led_set1 = <(RTL93XX_LED_SET_10G | RTL93XX_LED_SET_5G | RTL93XX_LED_SET_2P5G |
			     RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)
			    (RTL93XX_LED_SET_2P5G | RTL93XX_LED_SET_1G | RTL93XX_LED_SET_LINK |
			     RTL93XX_LED_SET_ACT)
			    (RTL93XX_LED_SET_5G | RTL93XX_LED_SET_100M | RTL93XX_LED_SET_LINK |
			     RTL93XX_LED_SET_ACT)
			    (RTL93XX_LED_SET_10G | RTL93XX_LED_SET_5G | RTL93XX_LED_SET_2P5G |
			     RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)>;

		/* [Lime] [Blue] */
		led_set2 = <(RTL93XX_LED_SET_1G | RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)
			    (RTL93XX_LED_SET_10G | RTL93XX_LED_SET_LINK | RTL93XX_LED_SET_ACT)>;
	};

	thermal-zones {
		phy24-thermal {
			/* Poll every 10 seconds */
			polling-delay-passive = <10000>;
			polling-delay = <10000>;
			thermal-sensors = <&phy24>;

			trips {
				phy24_trip0: phy24-trip0 {
					/* At 80 degrees turn on fan */
					temperature = <80000>;
					hysteresis = <1000>;
					type = "active";
				};

				phy24_trip1: phy24-trip1 {
					/* At 108 degrees phys exceed spec */
					temperature = <108000>;
					hysteresis = <5000>;
					type = "critical";
				};
			};

			cooling-maps {
				map {
					trip = <&phy24_trip0>;
					cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		phy25-thermal {
			/* Poll every 10 seconds */
			polling-delay-passive = <10000>;
			polling-delay = <10000>;
			thermal-sensors = <&phy25>;

			trips {
				phy25_trip0: phy25-trip0 {
					/* At 80 degrees turn on fan */
					temperature = <80000>;
					hysteresis = <1000>;
					type = "active";
				};

				phy25_trip1: phy25-trip1 {
					/* At 108 degrees phys exceed spec */
					temperature = <108000>;
					hysteresis = <5000>;
					type = "critical";
				};
			};

			cooling-maps {
				map {
					trip = <&phy25_trip0>;
					cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};

		phy26-thermal {
			/* Poll every 10 seconds */
			polling-delay-passive = <10000>;
			polling-delay = <10000>;
			thermal-sensors = <&phy26>;

			trips {
				phy26_trip0: phy26-trip0 {
					/* At 80 degrees turn on fan */
					temperature = <80000>;
					hysteresis = <1000>;
					type = "active";
				};

				phy26_trip1: phy26-trip1 {
					/* At 108 degrees phys exceed spec */
					temperature = <108000>;
					hysteresis = <5000>;
					type = "critical";
				};
			};

			cooling-maps {
				map {
					trip = <&phy26_trip0>;
					cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
				};
			};
		};
	};

	/* YEN SUN TECHNOLOGY FD122510LL-N fan */
	chassis_fan: gpio-fan {
		compatible = "gpio-fan";
		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
		gpio-fan,speed-map = <0    0
				      7000 1>;
		#cooling-cells = <2>;
	};
};

&i2c_mst1 {
	status = "okay";

	/* i2c of the SFP+ cage; port 12 */
	i2c0: i2c@1 {
		reg = <1>;
	};
};

&spi0 {
	status = "okay";
	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <10000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0xe0000>;
				read-only;
			};
			partition@e0000 {
				label = "u-boot-env";
				reg = <0xe0000 0x10000>;
			};
			partition@f0000 {
				label = "u-boot-env2";
				reg = <0xf0000 0x10000>;
				read-only;
			};
			partition@100000 {
				label = "jffs";
				reg = <0x100000 0x100000>;
			};
			partition@200000 {
				label = "jffs2";
				reg = <0x200000 0x100000>;
			};
			partition@b300000 {
				label = "firmware";
				reg = <0x300000 0xce0000>;
				compatible = "openwrt,uimage", "denx,uimage";
				openwrt,ih-magic = <0x93001250>;
			};
			partition@fe0000 {
				label = "log";
				reg = <0xfe0000 0x20000>;
			};
		};
	};
};

&mdio_bus0 {
	/*
	 * External RTL8218D or RTL8218E PHY
	 *
	 * reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
	 * disabled because we do not know how to bring up again
	 */
	PHY_C22(0, 0)
	PHY_C22(1, 1)
	PHY_C22(2, 2)
	PHY_C22(3, 3)
	PHY_C22(4, 4)
	PHY_C22(5, 5)
	PHY_C22(6, 6)
	PHY_C22(7, 7)
};

&switch0 {
	ethernet-ports {
		#address-cells = <1>;
		#size-cells = <0>;

		SWITCH_PORT_LED(0, 1, 2, 0, 0, usxgmii)
		SWITCH_PORT_LED(1, 2, 2, 1, 0, usxgmii)
		SWITCH_PORT_LED(2, 3, 2, 2, 0, usxgmii)
		SWITCH_PORT_LED(3, 4, 2, 3, 0, usxgmii)
		SWITCH_PORT_LED(4, 5, 2, 4, 0, usxgmii)
		SWITCH_PORT_LED(5, 6, 2, 5, 0, usxgmii)
		SWITCH_PORT_LED(6, 7, 2, 6, 0, usxgmii)
		SWITCH_PORT_LED(7, 8, 2, 7, 0, usxgmii)

		SWITCH_PORT_LED(24, 9, 6, 0, 1, usxgmii)
		SWITCH_PORT_LED(25, 10, 7, 0, 1, usxgmii)
		SWITCH_PORT_LED(26, 11, 8, 0, 1, usxgmii)

		SWITCH_PORT_SFP(27, 12, 9, 2, 0)

		port@28 {
			ethernet = <&ethernet0>;
			reg = <28>;
			phy-mode = "internal";
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};