// SPDX-License-Identifier: (GPL-2.0-or-later or MIT)
/dts-v1/;

#include "rtl931x.dtsi"
#include "rtl93xx_linksys_lgs3xxc_nand_common.dtsi"

#include <dt-bindings/phy/phy.h>

/ {
	compatible = "linksys,lgs352c", "realtek,rtl9311-soc";
	model = "Linksys LGS352C";

	memory@0 {
		device_type = "memory";
		reg = <0x00000000 0x10000000>, /* 256 MiB lowmem */
		      <0x90000000 0x10000000>; /* 256 MiB highmem */
	};
};

&i2c_mst1 {
	status = "okay";

	i2c2: i2c@2 {
		reg = <2>;

		lm63@4c {
			compatible = "national,lm63";
			reg = <0x4c>;
		};
	};
	i2c5: i2c@5 {
		reg = <5>;
	};
	i2c6: i2c@6 {
		reg = <6>;
	};
	i2c7: i2c@7 {
		reg = <7>;
	};
	i2c9: i2c@9 {
		reg = <9>;
	};
};

&sfp0 {
	i2c-bus = <&i2c5>;
};

&sfp1 {
	i2c-bus = <&i2c6>;
};

&sfp2 {
	i2c-bus = <&i2c7>;
};

&sfp3 {
	i2c-bus = <&i2c9>;
};

&mdio_aux {
	status = "okay";
	gpio1: expander@3 {
		compatible = "realtek,rtl8231";
		reg = <3>;

		gpio-controller;
		#gpio-cells = <2>;
		gpio-ranges = <&gpio1 0 0 37>;

		led-controller {
			compatible = "realtek,rtl8231-leds";
			status = "disabled";
		};
	};
};

&mdio_ctrl {
	pinctrl-names = "default";
	pinctrl-0 = <&pinmux_enable_mdc_mdio_0>,
		    <&pinmux_enable_mdc_mdio_1>;
};

&mdio_bus0 {
	PHY_C22(0, 0)
	PHY_C22(1, 1)
	PHY_C22(2, 2)
	PHY_C22(3, 3)
	PHY_C22(4, 4)
	PHY_C22(5, 5)
	PHY_C22(6, 6)
	PHY_C22(7, 7)
	PHY_C22(8, 8)
	PHY_C22(9, 9)
	PHY_C22(10, 10)
	PHY_C22(11, 11)
	PHY_C22(12, 12)
	PHY_C22(13, 13)
	PHY_C22(14, 14)
	PHY_C22(15, 15)
	PHY_C22(16, 16)
	PHY_C22(17, 17)
	PHY_C22(18, 18)
	PHY_C22(19, 19)
	PHY_C22(20, 20)
	PHY_C22(21, 21)
	PHY_C22(22, 22)
	PHY_C22(23, 23)
};

&mdio_bus1 {
	PHY_C22(24, 0)
	PHY_C22(25, 1)
	PHY_C22(26, 2)
	PHY_C22(27, 3)
	PHY_C22(28, 4)
	PHY_C22(29, 5)
	PHY_C22(30, 6)
	PHY_C22(31, 7)
	PHY_C22(32, 8)
	PHY_C22(33, 9)
	PHY_C22(34, 10)
	PHY_C22(35, 11)
	PHY_C22(36, 12)
	PHY_C22(37, 13)
	PHY_C22(38, 14)
	PHY_C22(39, 15)
	PHY_C22(40, 16)
	PHY_C22(41, 17)
	PHY_C22(42, 18)
	PHY_C22(43, 19)
	PHY_C22(44, 20)
	PHY_C22(45, 21)
	PHY_C22(46, 22)
	PHY_C22(47, 23)
};

&switch0 {
	ethernet-ports {
		#address-cells = <1>;
		#size-cells = <0>;

		SWITCH_PORT_SDS(0, 1, 2, 0, usxgmii)
		SWITCH_PORT_SDS(1, 2, 2, 1, usxgmii)
		SWITCH_PORT_SDS(2, 3, 2, 2, usxgmii)
		SWITCH_PORT_SDS(3, 4, 2, 3, usxgmii)
		SWITCH_PORT_SDS(4, 5, 2, 4, usxgmii)
		SWITCH_PORT_SDS(5, 6, 2, 5, usxgmii)
		SWITCH_PORT_SDS(6, 7, 2, 6, usxgmii)
		SWITCH_PORT_SDS(7, 8, 2, 7, usxgmii)

		SWITCH_PORT_SDS(8, 9, 3, 0, usxgmii)
		SWITCH_PORT_SDS(9, 10, 3, 1, usxgmii)
		SWITCH_PORT_SDS(10, 11, 3, 2, usxgmii)
		SWITCH_PORT_SDS(11, 12, 3, 3, usxgmii)
		SWITCH_PORT_SDS(12, 13, 3, 4, usxgmii)
		SWITCH_PORT_SDS(13, 14, 3, 5, usxgmii)
		SWITCH_PORT_SDS(14, 15, 3, 6, usxgmii)
		SWITCH_PORT_SDS(15, 16, 3, 7, usxgmii)

		SWITCH_PORT_SDS(16, 17, 4, 0, usxgmii)
		SWITCH_PORT_SDS(17, 18, 4, 1, usxgmii)
		SWITCH_PORT_SDS(18, 19, 4, 2, usxgmii)
		SWITCH_PORT_SDS(19, 20, 4, 3, usxgmii)
		SWITCH_PORT_SDS(20, 21, 4, 4, usxgmii)
		SWITCH_PORT_SDS(21, 22, 4, 5, usxgmii)
		SWITCH_PORT_SDS(22, 23, 4, 6, usxgmii)
		SWITCH_PORT_SDS(23, 24, 4, 7, usxgmii)

		SWITCH_PORT_SDS(24, 25, 5, 0, usxgmii)
		SWITCH_PORT_SDS(25, 26, 5, 1, usxgmii)
		SWITCH_PORT_SDS(26, 27, 5, 2, usxgmii)
		SWITCH_PORT_SDS(27, 28, 5, 3, usxgmii)
		SWITCH_PORT_SDS(28, 29, 5, 4, usxgmii)
		SWITCH_PORT_SDS(29, 30, 5, 5, usxgmii)
		SWITCH_PORT_SDS(30, 31, 5, 6, usxgmii)
		SWITCH_PORT_SDS(31, 32, 5, 7, usxgmii)

		SWITCH_PORT_SDS(32, 33, 6, 0, usxgmii)
		SWITCH_PORT_SDS(33, 34, 6, 1, usxgmii)
		SWITCH_PORT_SDS(34, 35, 6, 2, usxgmii)
		SWITCH_PORT_SDS(35, 36, 6, 3, usxgmii)
		SWITCH_PORT_SDS(36, 37, 6, 4, usxgmii)
		SWITCH_PORT_SDS(37, 38, 6, 5, usxgmii)
		SWITCH_PORT_SDS(38, 39, 6, 6, usxgmii)
		SWITCH_PORT_SDS(39, 40, 6, 7, usxgmii)

		SWITCH_PORT_SDS(40, 41, 7, 0, usxgmii)
		SWITCH_PORT_SDS(41, 42, 7, 1, usxgmii)
		SWITCH_PORT_SDS(42, 43, 7, 2, usxgmii)
		SWITCH_PORT_SDS(43, 44, 7, 3, usxgmii)
		SWITCH_PORT_SDS(44, 45, 7, 4, usxgmii)
		SWITCH_PORT_SDS(45, 46, 7, 5, usxgmii)
		SWITCH_PORT_SDS(46, 47, 7, 6, usxgmii)
		SWITCH_PORT_SDS(47, 48, 7, 7, usxgmii)

		SWITCH_PORT_SFP(48, 49, 8, 0, 0)
		SWITCH_PORT_SFP(50, 50, 9, 0, 1)
		SWITCH_PORT_SFP(52, 51, 10, 0, 2)
		SWITCH_PORT_SFP(53, 52, 11, 0, 3)

		port@56 {
			ethernet = <&ethernet0>;
			reg = <56>;
			phy-mode = "internal";
			fixed-link {
				speed = <1000>;
				full-duplex;
			};
		};
	};
};

&serdes8 {
	tx-polarity = <PHY_POL_INVERT>;
};

&serdes9 {
	tx-polarity = <PHY_POL_INVERT>;
};

&serdes10 {
	tx-polarity = <PHY_POL_INVERT>;
};

&serdes11 {
	tx-polarity = <PHY_POL_INVERT>;
};