716661d562
The Allwinner T113-s3 (sun8i) SoC features a dual-core Cortex-A7 ARM CPU and 128MB of DDR3 memory in the same physical package. It supports industrial temperature ranges. Most of the IP blocks are shared with the D1/D1s core. There are multiple variants of the SoC, which may vary in the included memory size, with some of them including a C906 RISC-V co-processor. Boards supported: - MangoPi MQDual T113 - wireless-only (RTL8723DS) - MYIR MYD-YT113 eMMC - 1Gbit ethernet (Motorcomm YT8531 PHY) - 4GByte eMMC - M.2-type slot for 4G/5G cards, plus 2x SIM slot - USB 2.0 ports - GPIO/I2C/SPI/CAN ports - FNLink 6131 (rtl8733bu) wifi module - MYIR MYD-YT113 SPI - Same as above but with 256Mbyte SPI-NAND flash instead of eMMC - Rongpin RP-T113 - 100Mbit ethernet (ICplus IP101GR PHY) - miniPCIe slot for 4G cards, plus 1x SIM slot - 3x USB 2.0 ports - RTL8723BS wireless - HYM8563 RTC - GPIO/I2C/SPI/CAN ports - Olimex T113-Olinuxino - 100Mbit ethernet (ICplus IP101GR) - UEXT connector (GPIO/I2C/SPI ports) - 1x USB 2.0 - audio jack, LEDC Installation: Use the standard sunxi installation to an SD-card. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
9 lines
403 B
Plaintext
9 lines
403 B
Plaintext
setenv fdt_high ffffffff
|
|
setenv mmc_rootpart 2
|
|
part uuid mmc ${mmc_bootdev}:${mmc_rootpart} uuid
|
|
setenv loadkernel fatload mmc \$mmc_bootdev \$kernel_addr_r uImage
|
|
setenv loaddtb fatload mmc \$mmc_bootdev \$fdt_addr_r dtb
|
|
setenv bootargs console=ttyS3,115200 earlyprintk root=PARTUUID=${uuid} rootwait
|
|
setenv uenvcmd run loadkernel \&\& run loaddtb \&\& bootm \$kernel_addr_r - \$fdt_addr_r
|
|
run uenvcmd
|