1
1
openwrt/target/linux/sunxi/image
Zoltan HERPAI 716661d562 sunxi: add T113-S3 support
The Allwinner T113-s3 (sun8i) SoC features a dual-core Cortex-A7 ARM CPU and
128MB of DDR3 memory in the same physical package. It supports industrial
temperature ranges. Most of the IP blocks are shared with the D1/D1s core.
There are multiple variants of the SoC, which may vary in the included memory
size, with some of them including a C906 RISC-V co-processor.

Boards supported:
 - MangoPi MQDual T113
   - wireless-only (RTL8723DS)

 - MYIR MYD-YT113 eMMC
   - 1Gbit ethernet (Motorcomm YT8531 PHY)
   - 4GByte eMMC
   - M.2-type slot for 4G/5G cards, plus 2x SIM slot
   - USB 2.0 ports
   - GPIO/I2C/SPI/CAN ports
   - FNLink 6131 (rtl8733bu) wifi module

 - MYIR MYD-YT113 SPI
   - Same as above but with 256Mbyte SPI-NAND flash instead of eMMC

 - Rongpin RP-T113
   - 100Mbit ethernet (ICplus IP101GR PHY)
   - miniPCIe slot for 4G cards, plus 1x SIM slot
   - 3x USB 2.0 ports
   - RTL8723BS wireless
   - HYM8563 RTC
   - GPIO/I2C/SPI/CAN ports

 - Olimex T113-Olinuxino
   - 100Mbit ethernet (ICplus IP101GR)
   - UEXT connector (GPIO/I2C/SPI ports)
   - 1x USB 2.0
   - audio jack, LEDC

Installation:
Use the standard sunxi installation to an SD-card.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2026-05-09 11:19:22 +02:00
..
arm926ejs.mk sunxi: image: sync target profiles names with DT compatible 2025-12-16 01:44:34 +01:00
Config.in sunxi: add sdcard image generation support when board profile is selected 2014-09-14 13:47:42 +00:00
cortexa7.mk sunxi: add T113-S3 support 2026-05-09 11:19:22 +02:00
cortexa8.mk sunxi: image: sync target profiles names with DT compatible 2025-12-16 01:44:34 +01:00
cortexa53.mk sunxi: image: sync target profiles names with DT compatible 2025-12-16 01:44:34 +01:00
gen_sunxi_sdcard_img.sh target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
Makefile sunxi: change target to use FIT kernel images 2025-08-11 23:06:24 +02:00