catspeed-cc/openwrt
1
1
Fork 0
Code
05b6a93173
openwrt/target/linux/ixp4xx/patches-6.12/0005-v6.18-ARM-dts-Add-ixp4xx-Actiontec-MI424WR-device-trees.patch
Linus Walleij c5f9a5e61c kernel/ixp4xx: restore files for v6.12 
This is an automatically generated commit which aids following Kernel patch
history, as git will see the move and copy as a rename thus defeating the
purpose.

For the original discussion see:
https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html

Link: https://github.com/openwrt/openwrt/pull/22896
Signed-off-by: Linus Walleij <linusw@kernel.org>
2026-04-15 00:16:32 +02:00

392 lines
9.4 KiB
Diff
Raw Blame History

From 85ac6b806993200fe117f4fd047c74784ec6b515 Mon Sep 17 00:00:00 2001
From: Linus Walleij <linus.walleij@linaro.org>
Date: Fri, 22 Aug 2025 19:56:16 +0200
Subject: [PATCH] ARM: dts: Add ixp4xx Actiontec MI424WR device trees
The Actiontex MI424WR is a pretty widespread home router, made
in many different revisions.
Revisions A, C and D are based on IXP42x. We add a device tree
for the A/C variant and one for the D variant as these differ in
the location of the WAN PHY on the MDIO bus, and the ethernet
interfaces for the WAN PHY and the DSA switch are switched around.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250822-ixp4xx-mi424wr-dts-v2-3-cc804884474d@linaro.org
---
arch/arm/boot/dts/intel/ixp/Makefile | 2 +
.../ixp/intel-ixp42x-actiontec-mi424wr-ac.dts | 37 +++
.../ixp/intel-ixp42x-actiontec-mi424wr-d.dts | 38 +++
.../ixp/intel-ixp42x-actiontec-mi424wr.dtsi | 272 ++++++++++++++++++
4 files changed, 349 insertions(+)
create mode 100644 arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
create mode 100644 arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
create mode 100644 arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
--- a/arch/arm/boot/dts/intel/ixp/Makefile
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -1,5 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_IXP4XX) += \
+ intel-ixp42x-actiontec-mi424wr-ac.dtb \
+ intel-ixp42x-actiontec-mi424wr-d.dtb \
intel-ixp42x-linksys-nslu2.dtb \
intel-ixp42x-linksys-wrv54g.dtb \
intel-ixp42x-freecom-fsg-3.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+ model = "Actiontec MI424WR rev A/C";
+ compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+ soc {
+ /* EthB used for WAN */
+ ethernet@c8009000 {
+ phy-handle = <&phy17>; // 17 on revision A-C
+
+ mdio {
+ phy17: ethernet-phy@17 {
+ /* WAN */
+ reg = <17>;
+ };
+ };
+ };
+
+ /* EthC used for LAN */
+ ethernet@c800a000 {
+ /* Fixed link to the CPU MII port on the KS8995 */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+ model = "Actiontec MI424WR rev D";
+ compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+ soc {
+ /* EthB used for LAN */
+ ethernet@c8009000 {
+ /* Fixed link to the CPU MII port on the KS8995 */
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio {
+ /* PHY ID 0x00221450 */
+ phy5: ethernet-phy@5 {
+ /* WAN */
+ reg = <5>;
+ };
+ };
+ };
+
+ /* EthC used for WAN */
+ ethernet@c800a000 {
+ phy-handle = <&phy5>; // 5 on revision D
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x02000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "uart1:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-wan-coax {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "wan-coax";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-power-alarm {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_ALARM;
+ gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-power {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ led-wireless {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-internet-down {
+ color = <LED_COLOR_ID_RED>;
+ function = "internet-down";
+ gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-internet-up {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "internet-up";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-lan-coax {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "lan-coax";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ led-wan-ethernet-alarm {
+ color = <LED_COLOR_ID_RED>;
+ function = "wan-ethernet-alarm";
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+ /* The last three LEDs are not mounted but traces exist on the PCB */
+ led-phone-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "phone-1";
+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-phone-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "phone-2";
+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ led-voip {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "voip";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ button-reset {
+ wakeup-source;
+ linux,code = <KEY_RESTART>;
+ label = "reset";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+ miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+ cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+ num-chipselects = <1>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-port@0 {
+ reg = <0>;
+ label = "lan1";
+ phy-mode = "mii";
+ phy-handle = <&phy1>;
+ };
+ ethernet-port@1 {
+ reg = <1>;
+ label = "lan2";
+ phy-mode = "mii";
+ phy-handle = <&phy2>;
+ };
+ ethernet-port@2 {
+ reg = <2>;
+ label = "lan3";
+ phy-mode = "mii";
+ phy-handle = <&phy3>;
+ };
+ ethernet-port@3 {
+ reg = <3>;
+ label = "lan4";
+ phy-mode = "mii";
+ phy-handle = <&phy4>;
+ };
+ ethernet-port@4 {
+ reg = <4>;
+ ethernet = <&ethc>;
+ phy-mode = "mii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+
+ };
+ };
+ };
+
+ soc {
+ bus@c4000000 {
+ flash@0,0 {
+ compatible = "intel,ixp4xx-flash", "cfi-flash";
+ bank-width = <2>;
+ /*
+ * 8 MB of Flash in 64 0x20000 sized blocks
+ * mapped in at CS0.
+ */
+ reg = <0 0x00000000 0x0800000>;
+
+ /* Configure expansion bus to allow writes */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ partitions {
+ compatible = "redboot-fis";
+ fis-index-block = <0x3f>;
+ };
+ };
+ gpio1: gpio@1,0 {
+ /* MMIO GPIO at CS1 */
+ compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ big-endian;
+ reg = <1 0x00000000 0x2>;
+ reg-names = "dat";
+ /* Expansion bus settings */
+ intel,ixp4xx-eb-write-enable = <1>;
+
+ pci-reset-hog {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-high;
+ line-name = "PCI reset";
+ };
+ pstn-relay-hog-1 {
+ gpio-hog;
+ gpios = <11 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "PSTN relay control 1";
+ };
+ pstn-relay-hog-2 {
+ gpio-hog;
+ gpios = <12 GPIO_ACTIVE_HIGH>;
+ output-low;
+ line-name = "PSTN relay control 2";
+ };
+ };
+ };
+
+ pci@c0000000 {
+ status = "okay";
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map =
+ /* IDSEL 13 */
+ <0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+ <0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+ /* IDSEL 14 */
+ <0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+ <0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+ /* IDSEL 15 */
+ <0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+ <0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+ };
+
+ ethb: ethernet@c8009000 {
+ status = "okay";
+ queue-rx = <&qmgr 3>;
+ queue-txready = <&qmgr 20>;
+ phy-mode = "mii";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 1, 2, 3 and 4 are ports on the KS8995 switch */
+ phy1: ethernet-phy@1 {
+ /* LAN1 */
+ reg = <1>;
+ };
+ phy2: ethernet-phy@2 {
+ /* LAN2 */
+ reg = <2>;
+ };
+ phy3: ethernet-phy@3 {
+ /* LAN3 */
+ reg = <3>;
+ };
+ phy4: ethernet-phy@4 {
+ /* LAN4 */
+ reg = <4>;
+ };
+ };
+ };
+
+ ethc: ethernet@c800a000 {
+ status = "okay";
+ queue-rx = <&qmgr 4>;
+ queue-txready = <&qmgr 21>;
+ phy-mode = "mii";
+ };
+ };
+};
View Git Blame Copy Permalink