openwrt/target/linux/mediatek/dts/mt7981b-netis-eap930-v1.dts

// SPDX-License-Identifier: GPL-2.0-only OR MIT

/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

#include "mt7981b.dtsi"

/ {
	model = "netis EAP930 V1";
	compatible = "netis,eap930-v1", "mediatek,mt7981";

	aliases {
		label-mac-device = &gmac1;

		led-boot = &led_status_red;
		led-failsafe = &led_status_red;
		led-running = &led_status_blue;
		led-upgrade = &led_status_red;

		serial0 = &uart0;
	};

	chosen {
		rootdisk = <&ubi_fit>;
		stdout-path = "serial0:115200n8";
	};

	gpio-keys {
		compatible = "gpio-keys";

		button-0 {
			label = "reset";
			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
			debounce-interval = <60>;
		};
	};

	leds {
		compatible = "gpio-leds";

		led_status_red: led-0 {
			color = <LED_COLOR_ID_RED>;
			function = LED_FUNCTION_STATUS;
			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
		};

		led_status_blue: led-1 {
			color = <LED_COLOR_ID_BLUE>;
			function = LED_FUNCTION_STATUS;
			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
		};
	};

	memory@40000000 {
		reg = <0 0x40000000 0 0x10000000>;
		device_type = "memory";
	};
};

&crypto {
	status = "okay";
};

&eth {
	status = "okay";

	mac@0 {
		status = "disabled";
	};

	gmac1: mac@1 {
		compatible = "mediatek,eth-mac";
		reg = <1>;
		phy-mode = "gmii";
		phy-handle = <&int_gbe_phy>;

		label = "lan";
		nvmem-cell-names = "mac-address";
		nvmem-cells = <&macaddr_factory_1fef20 (0)>;
	};
};

&spi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&spi0_flash_pins>;
	status = "okay";

	spi_nand@0 {
		compatible = "spi-nand";
		reg = <0>;

		spi-max-frequency = <52000000>;
		spi-tx-bus-width = <4>;
		spi-rx-bus-width = <4>;

		spi-cal-enable;
		spi-cal-mode = "read-data";
		spi-cal-datalen = <7>;
		spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
		spi-cal-addrlen = <5>;
		spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "BL2";
				reg = <0x0 0x100000>;
				read-only;
			};

			partition@100000 {
				label = "u-boot-env";
				reg = <0x100000 0x80000>;
				read-only;
			};

			factory: partition@180000 {
				label = "Factory";
				reg = <0x180000 0x200000>;
				read-only;
			};

			partition@380000 {
				label = "FIP";
				reg = <0x380000 0x200000>;
				read-only;
			};

			partition@580000 {
				label = "ubi";
				reg = <0x580000 0x7a80000>;
				compatible = "linux,ubi";

				volumes {
					ubi_fit: ubi-volume-fit {
						volname = "fit";
					};

					ubi_env: ubi-volume-ubootenv {
						volname = "ubootenv";
					};

					ubi_env2: ubi-volume-ubootenv2 {
						volname = "ubootenv2";
					};
				};
			};
		};
	};
};

&factory {
	nvmem-layout {
		compatible = "fixed-layout";
		#address-cells = <1>;
		#size-cells = <1>;

		eeprom_factory_0: eeprom@0 {
			reg = <0x0 0x1000>;
		};

		macaddr_factory_1fef20: macaddr@1fef20 {
			compatible = "mac-base";
			reg = <0x1fef20 0x6>;
			#nvmem-cell-cells = <1>;
		};
	};
};

&pio {
	spi0_flash_pins: spi0-pins {
		mux {
			function = "spi";
			groups = "spi0", "spi0_wp_hold";
		};

		conf-pu {
			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
			drive-strength = <MTK_DRIVE_8mA>;
			bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
		};

		conf-pd {
			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
			drive-strength = <MTK_DRIVE_8mA>;
			bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
		};
	};
};

&uart0 {
	status = "okay";
};

&ubi_env {
	nvmem-layout {
		compatible = "u-boot,env-redundant-bool-layout";
	};
};

&ubi_env2 {
	nvmem-layout {
		compatible = "u-boot,env-redundant-bool-layout";
	};
};

&watchdog {
	status = "okay";
};

&wifi {
	status = "okay";
	nvmem-cell-names = "eeprom";
	nvmem-cells = <&eeprom_factory_0>;
};