29b3d929a6
Novarq Tactical 1000 is a LAN9696 based switch. Specifications: * CPU: Microchip LAN9696 switch SoC * DRAM: 2GB DDR4 * Storage: * 32MB QSPI NOR * 16GB eMMC * Networking: * 24 x 10/100/1000 RJ45 via LAN8804 Quad PHY-s over QSGMII * 4 x 100/1000/2500/5000/10000 SFP+ ports * 1 x 10/100/1000 management RJ45 via LAN8840 PHY over RGMII (U-Boot too) * USB: 1 x USB2.0 Type-A * Management via USB-C (MCP2200): * UART @ 115200 baud (Default), 921600 possible * GPIO-s for bootstrap and reset * LED-s: * 2 per networking port (Green and Yellow) * Green status LED * Soft reset GPIO * Power: 12V DC barrel jack * External PoE: * Option for PoE add-on * Temperature Sensors: * TMP1075 onboard * CPU temperature * Microchip MCP79402 RTC with battery back-up * Microchip ATECC608C secure peripheral * CPU heatsink with PWM fan * Onboard header for case fan Installation instructions: 1. Connect to UART via the USB-C port 2. Connect the management port 3. Boot and interrupt U-Boot 4. TFTP the OpenWrt initramfs image and boot it 5. SCP the OpenWrt eMMC GPT image to a running OpenWrt initramfs to /tmp openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz And decompress it via: gzip -d /tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img.gz 6. Wipe eMMC with: dd if=/dev/zero of=/dev/mmcblk0 bs=1M 7. Flash OpenWrt eMMC image with: dd if=/tmp/openwrt-microchipsw-lan969x-novarq_tactical-1000-squashfs-emmc-gpt.img of=/dev/mmcblk0 After a restart OpenWrt will boot, and then regular sysupgrade can be used for upgrades. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
34 lines
538 B
Bash
34 lines
538 B
Bash
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0;
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
microchip,ev23x71a|\
|
|
novarq,tactical-1000)
|
|
CI_KERNPART="kernel"
|
|
CI_ROOTPART="rootfs"
|
|
emmc_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
platform_copy_config() {
|
|
case "$(board_name)" in
|
|
microchip,ev23x71a|\
|
|
novarq,tactical-1000)
|
|
emmc_copy_config
|
|
;;
|
|
esac
|
|
return 0;
|
|
}
|