Yonghyu Ban e507398b88 mediatek: filogic: add support for TP-Link Festa FR365 ... Hardware -------- SOC : MediaTek MT7981B 2x A53 RAM : NT5AD256M16E4-JR 512MiB Flash : ESMT F50L1G41LB 128MB ETH : 5x 1GbE (1x WAN, 4x LAN) 1x SFP+ (2.5 GbE) Switch : MediaTek MT7531AE WiFi : MediaTek MT7976D Buttons : Reset Power : DC 12V 2A Installation ------------ 1. Disassemble the device 2. Create solder bridge on R85, R86, Solder 4-pin header on J4. 3. Connect UART console. 4. In U-Boot shell, enter the following commands to prepare flashing ``` enable_phy extra_para set extra-para score 100 extra_para set extra-para fwFlag good ``` 5. Use `mtkupgrade` command to TFTP flash openwrt-mediatek-filogic-tplink_fr365-v1-squashfs-factory.bin 6. Reboot the device Signed-off-by: Yonghyu Ban <yhban@silicon.moe> Link: https://github.com/openwrt/openwrt/pull/19203 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>		2025-07-12 20:21:43 +02:00
..
imagebuilder	imagebuilder: implement STRIP_ABI option for manifest target	2025-07-03 12:45:59 +02:00
linux	mediatek: filogic: add support for TP-Link Festa FR365	2025-07-12 20:21:43 +02:00
llvm-bpf	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
sdk	build: fix building llvm tarball	2025-02-10 22:10:50 +01:00
toolchain	build: use zstd for IB, toolchain, SDK and LLVM compression	2024-04-13 08:05:04 +02:00
Config.in	image: add support for EROFS rootfs image generation	2025-07-05 15:24:54 +02:00
Makefile	build: add $(STAGING_DIR) and $(BIN_DIR) preparation to target and package subdir compile dependencies	2024-03-03 23:13:59 +01:00