catspeed-cc/openwrt
1
1
Fork 0
Code
40f6298d06
openwrt/target/linux/airoha/patches-6.18/090-v6.17-net-mdio-Add-MDIO-bus-controller-for-Airoha-AN7583.patch
Kenneth Kasilag e89e9c412f
kernel/airoha: create files for v6.18 (from v6.12) 
This is an automatically generated commit.

When doing `git bisect`, consider `git bisect --skip`.

Signed-off-by: Kenneth Kasilag <kenneth@kasilag.me>
Link: https://github.com/openwrt/openwrt/pull/21019
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
2026-06-03 09:06:32 +02:00

343 lines
9.8 KiB
Diff
Raw Blame History

From 67e3ba978361cb262f8f8981ab88ccb97f1e2bda Mon Sep 17 00:00:00 2001
From: Christian Marangi <ansuelsmth@gmail.com>
Date: Tue, 17 Jun 2025 11:16:53 +0200
Subject: [PATCH] net: mdio: Add MDIO bus controller for Airoha AN7583
Airoha AN7583 SoC have 2 dedicated MDIO bus controller in the SCU
register map. To driver register an MDIO controller based on the DT
reg property and access the register by accessing the parent syscon.
The MDIO bus logic is similar to the MT7530 internal MDIO bus but
deviates of some setting and some HW bug.
On Airoha AN7583 the MDIO clock is set to 25MHz by default and needs to
be correctly setup to 2.5MHz to correctly work (by setting the divisor
to 10x).
There seems to be Hardware bug where AN7583_MII_RWDATA
is not wiped in the context of unconnected PHY and the
previous read value is returned.
Example: (only one PHY on the BUS at 0x1f)
- read at 0x1f report at 0x2 0x7500
- read at 0x0 report 0x7500 on every address
To workaround this, we reset the Mdio BUS at every read
to have consistent values on read operation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/mdio/Kconfig | 7 +
drivers/net/mdio/Makefile | 1 +
drivers/net/mdio/mdio-airoha.c | 276 +++++++++++++++++++++++++++++++++
3 files changed, 284 insertions(+)
create mode 100644 drivers/net/mdio/mdio-airoha.c
--- a/drivers/net/mdio/Kconfig
+++ b/drivers/net/mdio/Kconfig
@@ -46,6 +46,13 @@ if MDIO_BUS
config MDIO_DEVRES
tristate
+config MDIO_AIROHA
+ tristate "Airoha AN7583 MDIO bus controller"
+ depends on ARCH_AIROHA || COMPILE_TEST
+ help
+ This module provides a driver for the MDIO busses found in the
+ Airoha AN7583 SoC's.
+
config MDIO_SUN4I
tristate "Allwinner sun4i MDIO interface support"
depends on ARCH_SUNXI || COMPILE_TEST
--- a/drivers/net/mdio/Makefile
+++ b/drivers/net/mdio/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_ACPI_MDIO) += acpi_mdio.o
obj-$(CONFIG_FWNODE_MDIO) += fwnode_mdio.o
obj-$(CONFIG_OF_MDIO) += of_mdio.o
+obj-$(CONFIG_MDIO_AIROHA) += mdio-airoha.o
obj-$(CONFIG_MDIO_ASPEED) += mdio-aspeed.o
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
--- /dev/null
+++ b/drivers/net/mdio/mdio-airoha.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Airoha AN7583 MDIO interface driver
+ *
+ * Copyright (C) 2025 Christian Marangi <ansuelsmth@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_mdio.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/* MII address register definitions */
+#define AN7583_MII_BUSY BIT(31)
+#define AN7583_MII_RDY BIT(30) /* RO signal BUS is ready */
+#define AN7583_MII_CL22_REG_ADDR GENMASK(29, 25)
+#define AN7583_MII_CL45_DEV_ADDR AN7583_MII_CL22_REG_ADDR
+#define AN7583_MII_PHY_ADDR GENMASK(24, 20)
+#define AN7583_MII_CMD GENMASK(19, 18)
+#define AN7583_MII_CMD_CL22_WRITE FIELD_PREP_CONST(AN7583_MII_CMD, 0x1)
+#define AN7583_MII_CMD_CL22_READ FIELD_PREP_CONST(AN7583_MII_CMD, 0x2)
+#define AN7583_MII_CMD_CL45_ADDR FIELD_PREP_CONST(AN7583_MII_CMD, 0x0)
+#define AN7583_MII_CMD_CL45_WRITE FIELD_PREP_CONST(AN7583_MII_CMD, 0x1)
+#define AN7583_MII_CMD_CL45_POSTREAD_INCADDR FIELD_PREP_CONST(AN7583_MII_CMD, 0x2)
+#define AN7583_MII_CMD_CL45_READ FIELD_PREP_CONST(AN7583_MII_CMD, 0x3)
+#define AN7583_MII_ST GENMASK(17, 16)
+#define AN7583_MII_ST_CL45 FIELD_PREP_CONST(AN7583_MII_ST, 0x0)
+#define AN7583_MII_ST_CL22 FIELD_PREP_CONST(AN7583_MII_ST, 0x1)
+#define AN7583_MII_RWDATA GENMASK(15, 0)
+#define AN7583_MII_CL45_REG_ADDR AN7583_MII_RWDATA
+
+#define AN7583_MII_MDIO_DELAY_USEC 100
+#define AN7583_MII_MDIO_RETRY_MSEC 100
+
+struct airoha_mdio_data {
+ u32 base_addr;
+ struct regmap *regmap;
+ struct clk *clk;
+ struct reset_control *reset;
+};
+
+static int airoha_mdio_wait_busy(struct airoha_mdio_data *priv)
+{
+ u32 busy;
+
+ return regmap_read_poll_timeout(priv->regmap, priv->base_addr, busy,
+ !(busy & AN7583_MII_BUSY),
+ AN7583_MII_MDIO_DELAY_USEC,
+ AN7583_MII_MDIO_RETRY_MSEC * USEC_PER_MSEC);
+}
+
+static void airoha_mdio_reset(struct airoha_mdio_data *priv)
+{
+ /* There seems to be Hardware bug where AN7583_MII_RWDATA
+ * is not wiped in the context of unconnected PHY and the
+ * previous read value is returned.
+ *
+ * Example: (only one PHY on the BUS at 0x1f)
+ * - read at 0x1f report at 0x2 0x7500
+ * - read at 0x0 report 0x7500 on every address
+ *
+ * To workaround this, we reset the Mdio BUS at every read
+ * to have consistent values on read operation.
+ */
+ reset_control_assert(priv->reset);
+ reset_control_deassert(priv->reset);
+}
+
+static int airoha_mdio_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct airoha_mdio_data *priv = bus->priv;
+ u32 val;
+ int ret;
+
+ airoha_mdio_reset(priv);
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL22 |
+ AN7583_MII_CMD_CL22_READ;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL22_REG_ADDR, regnum);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, priv->base_addr, &val);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(AN7583_MII_RWDATA, val);
+}
+
+static int airoha_mdio_write(struct mii_bus *bus, int addr, int regnum,
+ u16 value)
+{
+ struct airoha_mdio_data *priv = bus->priv;
+ u32 val;
+ int ret;
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL22 |
+ AN7583_MII_CMD_CL22_WRITE;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL22_REG_ADDR, regnum);
+ val |= FIELD_PREP(AN7583_MII_RWDATA, value);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+
+ return ret;
+}
+
+static int airoha_mdio_cl45_read(struct mii_bus *bus, int addr, int devnum,
+ int regnum)
+{
+ struct airoha_mdio_data *priv = bus->priv;
+ u32 val;
+ int ret;
+
+ airoha_mdio_reset(priv);
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL45 |
+ AN7583_MII_CMD_CL45_ADDR;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL45_DEV_ADDR, devnum);
+ val |= FIELD_PREP(AN7583_MII_CL45_REG_ADDR, regnum);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+ if (ret)
+ return ret;
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL45 |
+ AN7583_MII_CMD_CL45_READ;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL45_DEV_ADDR, devnum);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(priv->regmap, priv->base_addr, &val);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(AN7583_MII_RWDATA, val);
+}
+
+static int airoha_mdio_cl45_write(struct mii_bus *bus, int addr, int devnum,
+ int regnum, u16 value)
+{
+ struct airoha_mdio_data *priv = bus->priv;
+ u32 val;
+ int ret;
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL45 |
+ AN7583_MII_CMD_CL45_ADDR;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL45_DEV_ADDR, devnum);
+ val |= FIELD_PREP(AN7583_MII_CL45_REG_ADDR, regnum);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+ if (ret)
+ return ret;
+
+ val = AN7583_MII_BUSY | AN7583_MII_ST_CL45 |
+ AN7583_MII_CMD_CL45_WRITE;
+ val |= FIELD_PREP(AN7583_MII_PHY_ADDR, addr);
+ val |= FIELD_PREP(AN7583_MII_CL45_DEV_ADDR, devnum);
+ val |= FIELD_PREP(AN7583_MII_RWDATA, value);
+
+ ret = regmap_write(priv->regmap, priv->base_addr, val);
+ if (ret)
+ return ret;
+
+ ret = airoha_mdio_wait_busy(priv);
+
+ return ret;
+}
+
+static int airoha_mdio_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct airoha_mdio_data *priv;
+ struct mii_bus *bus;
+ u32 addr, freq;
+ int ret;
+
+ ret = of_property_read_u32(dev->of_node, "reg", &addr);
+ if (ret)
+ return ret;
+
+ bus = devm_mdiobus_alloc_size(dev, sizeof(*priv));
+ if (!bus)
+ return -ENOMEM;
+
+ priv = bus->priv;
+ priv->base_addr = addr;
+ priv->regmap = device_node_to_regmap(dev->parent->of_node);
+
+ priv->clk = devm_clk_get_enabled(dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ priv->reset = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(priv->reset))
+ return PTR_ERR(priv->reset);
+
+ reset_control_deassert(priv->reset);
+
+ bus->name = "airoha_mdio_bus";
+ snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(dev));
+ bus->parent = dev;
+ bus->read = airoha_mdio_read;
+ bus->write = airoha_mdio_write;
+ bus->read_c45 = airoha_mdio_cl45_read;
+ bus->write_c45 = airoha_mdio_cl45_write;
+
+ /* Check if a custom frequency is defined in DT or default to 2.5 MHz */
+ if (of_property_read_u32(dev->of_node, "clock-frequency", &freq))
+ freq = 2500000;
+
+ ret = clk_set_rate(priv->clk, freq);
+ if (ret)
+ return ret;
+
+ ret = devm_of_mdiobus_register(dev, bus, dev->of_node);
+ if (ret) {
+ reset_control_assert(priv->reset);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id airoha_mdio_dt_ids[] = {
+ { .compatible = "airoha,an7583-mdio" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, airoha_mdio_dt_ids);
+
+static struct platform_driver airoha_mdio_driver = {
+ .probe = airoha_mdio_probe,
+ .driver = {
+ .name = "airoha-mdio",
+ .of_match_table = airoha_mdio_dt_ids,
+ },
+};
+
+module_platform_driver(airoha_mdio_driver);
+
+MODULE_DESCRIPTION("Airoha AN7583 MDIO interface driver");
+MODULE_AUTHOR("Christian Marangi <ansuelsmth@gmail.com>");
+MODULE_LICENSE("GPL");
View Git Blame Copy Permalink