catspeed-cc/openwrt
2
1
Fork 0
Code Issues Pull Requests Activity
53a8e7b2d4
openwrt/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom
History
Chukun Pan 53a8e7b2d4 qualcommax: ipq60xx: add JDCloud RE-CS-02 support 
Specifications:
  SoC:     Qualcomm IPQ6010 1.8GHz
  RAM:     K4A4G165WF-BCTD x2 1GiB
  Flash:   FORESEE 128GB/256GB eMMC
  ETH:     4x 1Gbps + 1x 2.5Gbps
  WLAN1:   QCN5022 2.4GHz AX 2x2
  WLAN2:   QCN5052 5.8GHz AX 2x2
  WLAN2:   QCN9024 5.2GHz AX 4x4
  Button:  Reset, Screen, Wps
  Power:   DC 12V 3A
  USB:     1x 3.0

Flash instructions:
  1. Download the initramfs image, rename it to
     initramfs.itb, host it with the tftp server.
  2. If the stock firmware version is 4.3.0.r4211
     or higher, enter "jdmt018R" to interrupt
     U-Boot when the following statement appears:
     "disabled console and autoboot in 2 seconds"
  3. Run these commands in U-Boot console:
     tftpboot initramfs.itb
     bootm
  4. After openwrt boots up, use scp or luci web
     to upload sysupgrade.bin to upgrade.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19840
Signed-off-by: Robert Marko <robimarko@gmail.com>
2026-01-18 11:13:54 +01:00
..
ipq5018-ax830.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-ax850.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-ax6000.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-ess.dtsi qualcommax: ipq50xx: prepare for UNIPHY reset fix 2025-06-02 22:59:05 +02:00
ipq5018-gl-b3000.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-mr5500.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-mx2000.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-mx5500.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-mx6200.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-mx-base.dtsi qualcommax: ipq50xx: move bootargs to Linksys board files 2025-12-24 10:42:39 +01:00
ipq5018-pz-l8.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-qcn6122.dtsi Revert "qualcommax: ipq50xx: remove ipq5018 and qcn6122 wifi m3 fw" 2025-12-27 12:16:15 +01:00
ipq5018-scr50axe.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-spnmx56.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-wn-dax3000gr.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq5018-wrc-x3000gs2.dts qualcommax: ipq50xx: match QDSK ports unit address with port id 2026-01-16 19:46:45 +01:00
ipq6000-360v6.dts
ipq6000-ap120c-ax.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq6000-gl-ax1800.dts qualcommax: ipq60xx: add GL.iNet GL-AX1800/AXT1800 support 2025-03-24 10:16:00 +01:00
ipq6000-gl-axt1800.dts treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
ipq6000-glinet.dtsi treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
ipq6000-mr7350.dts treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
ipq6000-re-ss-01.dts qualcommax: ipq60xx: add JDCloud RE-SS-01 support 2026-01-17 16:18:13 +01:00
ipq6010-mango-dvk.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq6010-re-cs-02.dts qualcommax: ipq60xx: add JDCloud RE-CS-02 support 2026-01-18 11:13:54 +01:00
ipq6010-re-cs.dtsi qualcommax: ipq60xx: add JDCloud RE-CS-02 support 2026-01-18 11:13:54 +01:00
ipq6010-wax214.dts
ipq6010-wax610-base.dtsi qualcommax: ipq60xx: LED mapping update for Netgear WAX610 and WAX610Y 2025-04-29 14:53:56 +02:00
ipq6010-wax610.dts qualcommax: ipq60xx: add support for Netgear WAX610 and WAX610Y 2025-04-04 14:38:01 +02:00
ipq6010-wax610y.dts qualcommax: ipq60xx: add support for Netgear WAX610 and WAX610Y 2025-04-04 14:38:01 +02:00
ipq6010-xe3-4.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq6018-512m.dtsi qualcommax: ipq6018: remove unused reserved memory 2025-07-30 23:33:44 +02:00
ipq6018-cp-cpu.dtsi qualcommax: backport cpufreq patch for ipq60xx 2025-03-24 10:16:00 +01:00
ipq6018-cpr-regulator.dtsi qualcommax: backport cpufreq patch for ipq60xx 2025-03-24 10:16:00 +01:00
ipq6018-eap610-outdoor.dts qualcommax: ipq60xx: split eap610-outdoor devicetree 2025-05-14 19:38:25 +02:00
ipq6018-eap623od-hd-v1.dts qualcommax: eap623od-hd-v1: fix phy node and LED config 2025-04-11 10:04:35 +02:00
ipq6018-eap625-outdoor-hd-v1.dts qualcommax: ipq60xx: add TP-Link EAP625-Outdoor HD v1 support 2025-05-14 19:38:25 +02:00
ipq6018-ess.dtsi ipq6018-ess: Add dp5-syn node 2025-03-28 12:38:32 +01:00
ipq6018-fap650.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq6018-mr7500.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq6018-tplink-eap6xx-outdoor.dtsi qualcommax: ipq60xx: eap6xx-outdoor: add PHY reset pinctrl 2025-05-14 19:38:25 +02:00
ipq8070-cax1800.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8070-rm2-6.dts
ipq8071-ap8220.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8071-ax6.dts
ipq8071-ax3600.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq8071-ax3600.dtsi
ipq8071-eap102.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8071-mf269.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8071-nwa210ax.dts qualcommax: ipq807x: add support for Zyxel NWA210AX 2025-12-01 14:30:27 +01:00
ipq8072-301w.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8072-aw1000.dts treewide: gpio to gpios 2025-10-08 14:26:24 +02:00
ipq8072-ax880.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8072-ax9000.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq8072-dl-wrx36.dts qualcommax: dl-wrx36: fix 2.5G port LED-s 2025-01-18 16:09:32 +01:00
ipq8072-eap620hd-v1.dts treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
ipq8072-eap660hd-v1.dts treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
ipq8072-haze.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq8072-mx5300.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq8072-mx8500.dts Revert "treewide: fixup ath10k nodes" 2025-11-29 17:56:11 +01:00
ipq8072-sax1v1k.dts treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
ipq8072-wax218.dts
ipq8072-wax620.dts
ipq8072-wpq873.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8072-zbt-z800ax.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8074-512m.dtsi
ipq8074-ac-cpu.dtsi qualcommax: backport some upstream dts changes 2025-03-24 10:15:59 +01:00
ipq8074-cpr-regulator.dtsi
ipq8074-deco-x80-5g.dts Qualcommax: IPQ807x: Add support for TP-Link Deco X80-5G 2025-04-22 13:25:40 +02:00
ipq8074-ess.dtsi
ipq8074-hk-cpu.dtsi qualcommax: backport some upstream dts changes 2025-03-24 10:15:59 +01:00
ipq8074-nbg7815.dts treewide: dts: remove {#address,#size}-cells from "jedec,spi-nor" compatible node 2025-11-27 12:37:49 +01:00
ipq8074-rax120v2.dts
ipq8074-rt-ax89x.dts qualcommax: fix switch node dtc warnings for Asus RT-AX89X 2025-10-19 21:55:34 +02:00
ipq8074-sxk80.dtsi treewide: strip trailing whitespace 2025-05-20 00:47:37 +02:00
ipq8074-sxr80.dts
ipq8074-sxs80.dts
ipq8074-wax630.dts
ipq8074-wxr-5950ax12.dts
ipq8174-homewrk.dts qualcommax: ipq807x: use ascii-env driver for Linksys MX devices 2025-09-16 15:19:54 +02:00
ipq8174-mx4x00.dtsi qualcommax: ipq807x: use ascii-env driver for Linksys MX devices 2025-09-16 15:19:54 +02:00
ipq8174-mx4200.dtsi qualcommax: ipq807x: use ascii-env driver for Linksys MX4200v1 2025-12-16 10:22:33 +01:00
ipq8174-mx4200v1.dts qualcommax: ipq807x: use ascii-env driver for Linksys MX4200v1 2025-12-16 10:22:33 +01:00
ipq8174-mx4200v2.dts qualcommax: ipq807x: use ascii-env driver for Linksys MX4200v1 2025-12-16 10:22:33 +01:00
ipq8174-mx4300.dts qualcommax: ipq807x: use ascii-env driver for Linksys MX devices 2025-09-16 15:19:54 +02:00