Ryan Mounce 6d6985ff0e ath79: add support for WD My Net N750 ... SoC: AR9344 RAM: 128MB Flash: 16MiB Winbond 25Q128BVFG SPI NOR 5GHz WiFi: AR9380 PCIe 3x3:3 802.11n 2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n 5x Gigabit ethernet via AR8327N switch (green + amber LEDs) 2x USB 2.0 via GL850G hub 4x front LEDs from SoC GPIO 1x front WPS button from SoC GPIO 1x bottom reset button from SoC GPIO Known issues: AR8327N LEDs only have default functionality, not presented in sysfs. This is a regression from ar71xx. UART header JP1, 115200 no parity 1 stop TX GND VCC (N/P) RX See https://openwrt.org/toh/wd/n750 for flashing detail. Procedures unchanged from ar71xx. Tested sysupgrade + factory flash from WD Emergency Recovery Signed-off-by: Ryan Mounce <ryan@mounce.com.au>		2019-05-27 22:44:08 +02:00
..
imagebuilder	imagebuilder: new DISABLED_SERVICES make variable	2019-05-15 13:34:24 +02:00
linux	ath79: add support for WD My Net N750	2019-05-27 22:44:08 +02:00
sdk	sdk: fix building external modules when CONFIG_STACK_VALIDATION=y	2019-04-26 13:05:39 +00:00
toolchain
Config.in	build: add a config option for enabling a testing version of the target kernel	2019-05-11 11:37:10 +02:00
Makefile