716661d562
The Allwinner T113-s3 (sun8i) SoC features a dual-core Cortex-A7 ARM CPU and 128MB of DDR3 memory in the same physical package. It supports industrial temperature ranges. Most of the IP blocks are shared with the D1/D1s core. There are multiple variants of the SoC, which may vary in the included memory size, with some of them including a C906 RISC-V co-processor. Boards supported: - MangoPi MQDual T113 - wireless-only (RTL8723DS) - MYIR MYD-YT113 eMMC - 1Gbit ethernet (Motorcomm YT8531 PHY) - 4GByte eMMC - M.2-type slot for 4G/5G cards, plus 2x SIM slot - USB 2.0 ports - GPIO/I2C/SPI/CAN ports - FNLink 6131 (rtl8733bu) wifi module - MYIR MYD-YT113 SPI - Same as above but with 256Mbyte SPI-NAND flash instead of eMMC - Rongpin RP-T113 - 100Mbit ethernet (ICplus IP101GR PHY) - miniPCIe slot for 4G cards, plus 1x SIM slot - 3x USB 2.0 ports - RTL8723BS wireless - HYM8563 RTC - GPIO/I2C/SPI/CAN ports - Olimex T113-Olinuxino - 100Mbit ethernet (ICplus IP101GR) - UEXT connector (GPIO/I2C/SPI ports) - 1x USB 2.0 - audio jack, LEDC Installation: Use the standard sunxi installation to an SD-card. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
26 lines
672 B
Diff
26 lines
672 B
Diff
From 1be7791f220325b0d6f42c3f2c383d8423936942 Mon Sep 17 00:00:00 2001
|
|
From: Zoltan HERPAI <wigyori@uid0.hu>
|
|
Date: Sat, 3 Jun 2023 00:52:04 +0200
|
|
Subject: [PATCH 4005/4018] sunxi: add uart0_pins on Port E PE2/PE3 on D1s/T133
|
|
|
|
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
|
|
---
|
|
arch/riscv/dts/sunxi-d1s-t113.dtsi | 6 ++++++
|
|
1 file changed, 6 insertions(+)
|
|
|
|
--- a/arch/riscv/dts/sunxi-d1s-t113.dtsi
|
|
+++ b/arch/riscv/dts/sunxi-d1s-t113.dtsi
|
|
@@ -143,6 +143,12 @@
|
|
pins = "PB6", "PB7";
|
|
function = "uart3";
|
|
};
|
|
+
|
|
+ /omit-if-no-ref/
|
|
+ uart0_pins: uart0-pins {
|
|
+ pins = "PE2", "PE3";
|
|
+ function = "uart0";
|
|
+ };
|
|
};
|
|
|
|
ccu: clock-controller@2001000 {
|