716661d562
The Allwinner T113-s3 (sun8i) SoC features a dual-core Cortex-A7 ARM CPU and 128MB of DDR3 memory in the same physical package. It supports industrial temperature ranges. Most of the IP blocks are shared with the D1/D1s core. There are multiple variants of the SoC, which may vary in the included memory size, with some of them including a C906 RISC-V co-processor. Boards supported: - MangoPi MQDual T113 - wireless-only (RTL8723DS) - MYIR MYD-YT113 eMMC - 1Gbit ethernet (Motorcomm YT8531 PHY) - 4GByte eMMC - M.2-type slot for 4G/5G cards, plus 2x SIM slot - USB 2.0 ports - GPIO/I2C/SPI/CAN ports - FNLink 6131 (rtl8733bu) wifi module - MYIR MYD-YT113 SPI - Same as above but with 256Mbyte SPI-NAND flash instead of eMMC - Rongpin RP-T113 - 100Mbit ethernet (ICplus IP101GR PHY) - miniPCIe slot for 4G cards, plus 1x SIM slot - 3x USB 2.0 ports - RTL8723BS wireless - HYM8563 RTC - GPIO/I2C/SPI/CAN ports - Olimex T113-Olinuxino - 100Mbit ethernet (ICplus IP101GR) - UEXT connector (GPIO/I2C/SPI ports) - 1x USB 2.0 - audio jack, LEDC Installation: Use the standard sunxi installation to an SD-card. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
374 lines
10 KiB
Makefile
374 lines
10 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
#
|
|
# Copyright (C) 2013-2019 OpenWrt.org
|
|
# Copyright (C) 2016 Yousong Zhou
|
|
|
|
KERNEL_LOADADDR:=0x40008000
|
|
|
|
define Device/cubietech_cubieboard2
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Cubietech
|
|
DEVICE_MODEL := Cubieboard2
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += cubietech_cubieboard2
|
|
|
|
define Device/cubietech_cubietruck
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Cubietech
|
|
DEVICE_MODEL := Cubietruck
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-brcmfmac
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += cubietech_cubietruck
|
|
|
|
define Device/friendlyarm_nanopi-m1-plus
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi M1 Plus
|
|
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
|
|
cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-m1-plus
|
|
|
|
define Device/friendlyarm_nanopi-neo
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi NEO
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-neo
|
|
|
|
define Device/friendlyarm_nanopi-neo-air
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi NEO Air
|
|
DEVICE_PACKAGES := kmod-leds-gpio kmod-brcmfmac \
|
|
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-neo-air
|
|
|
|
define Device/friendlyarm_nanopi-r1
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := NanoPi R1
|
|
DEVICE_PACKAGES := kmod-usb-net-rtl8152 kmod-leds-gpio \
|
|
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_nanopi-r1
|
|
|
|
define Device/friendlyarm_zeropi
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := FriendlyARM
|
|
DEVICE_MODEL := ZeroPi
|
|
DEVICE_PACKAGES := kmod-rtc-sunxi
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += friendlyarm_zeropi
|
|
|
|
define Device/lamobo_lamobo-r1
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Lamobo
|
|
DEVICE_MODEL := Lamobo R1
|
|
DEVICE_ALT0_VENDOR := Bananapi
|
|
DEVICE_ALT0_MODEL := BPi-R1
|
|
DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-mbedtls
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += lamobo_lamobo-r1
|
|
|
|
define Device/lemaker_bananapi
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := LeMaker
|
|
DEVICE_MODEL := Banana Pi
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += lemaker_bananapi
|
|
|
|
define Device/pine64_pinecube
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Pine64
|
|
DEVICE_MODEL := PineCube
|
|
SOC := sun8i-s3
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-pinecube
|
|
endef
|
|
TARGET_DEVICES += pine64_pinecube
|
|
|
|
define Device/sinovoip_bpi-m2-berry
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Sinovoip
|
|
DEVICE_MODEL := Banana Pi M2 Berry
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
|
|
cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SUPPORTED_DEVICES += lemaker,bananapi-m2-berry
|
|
SOC := sun8i-v40
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-berry
|
|
endef
|
|
TARGET_DEVICES += sinovoip_bpi-m2-berry
|
|
|
|
define Device/sinovoip_bpi-m2-ultra
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Sinovoip
|
|
DEVICE_MODEL := Banana Pi M2 Ultra
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-brcmfmac \
|
|
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
|
|
SUPPORTED_DEVICES += lemaker,bananapi-m2-ultra
|
|
SOC := sun8i-r40
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-ultra
|
|
endef
|
|
TARGET_DEVICES += sinovoip_bpi-m2-ultra
|
|
|
|
define Device/lemaker_bananapro
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := LeMaker
|
|
DEVICE_MODEL := Banana Pro
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi kmod-brcmfmac \
|
|
cypress-firmware-43362-sdio wpad-basic-mbedtls
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += lemaker_bananapro
|
|
|
|
define Device/licheepi_licheepi-zero-dock
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := LicheePi
|
|
DEVICE_MODEL := Zero with Dock (V3s)
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-v3s
|
|
endef
|
|
TARGET_DEVICES += licheepi_licheepi-zero-dock
|
|
|
|
define Device/linksprite_pcduino3
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := LinkSprite
|
|
DEVICE_MODEL := pcDuino3
|
|
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtc-sunxi kmod-ata-sunxi kmod-rtl8xxxu \
|
|
rtl8188eu-firmware
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += linksprite_pcduino3
|
|
|
|
define Device/linksprite_pcduino3-nano
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := LinkSprite
|
|
DEVICE_MODEL := pcDuino3 Nano
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-ata-sunxi
|
|
SOC := sun7i-a20
|
|
endef
|
|
TARGET_DEVICES += linksprite_pcduino3-nano
|
|
|
|
define Device/mele_m9
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Mele
|
|
DEVICE_MODEL := M9
|
|
DEVICE_PACKAGES:=kmod-sun4i-emac kmod-rtl8192cu
|
|
SOC := sun6i-a31
|
|
endef
|
|
TARGET_DEVICES += mele_m9
|
|
|
|
define Device/merrii_hummingbird
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Merrii
|
|
DEVICE_MODEL := Hummingbird
|
|
DEVICE_PACKAGES:=kmod-brcmfmac cypress-firmware-43362-sdio wpad-basic-mbedtls
|
|
SOC := sun6i-a31
|
|
endef
|
|
TARGET_DEVICES += merrii_hummingbird
|
|
|
|
define Device/olimex_a20-olinuxino-lime
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A20-OLinuXino-LIME
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi
|
|
SOC := sun7i
|
|
endef
|
|
TARGET_DEVICES += olimex_a20-olinuxino-lime
|
|
|
|
define Device/olimex_a20-olinuxino-lime2
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A20-OLinuXino-LIME2
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
|
|
SOC := sun7i
|
|
endef
|
|
TARGET_DEVICES += olimex_a20-olinuxino-lime2
|
|
|
|
define Device/olimex_a20-olinuxino-lime2-emmc
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A20-OLinuXino-LIME2
|
|
DEVICE_VARIANT := eMMC
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtc-sunxi kmod-usb-hid
|
|
SOC := sun7i
|
|
endef
|
|
TARGET_DEVICES += olimex_a20-olinuxino-lime2-emmc
|
|
|
|
define Device/olimex_a20-olinuxino-micro
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := A20-OLinuXino-MICRO
|
|
DEVICE_PACKAGES:=kmod-ata-sunxi kmod-sun4i-emac kmod-rtc-sunxi
|
|
SOC := sun7i
|
|
endef
|
|
TARGET_DEVICES += olimex_a20-olinuxino-micro
|
|
|
|
define Device/roofull_beelink-x2
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Roofull
|
|
DEVICE_MODEL := Beelink-X2
|
|
DEVICE_PACKAGES:=kmod-leds-gpio kmod-gpio-button-hotplug \
|
|
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += roofull_beelink-x2
|
|
|
|
define Device/sinovoip_bpi-m2-plus
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Sinovoip
|
|
DEVICE_MODEL := Banana Pi M2+
|
|
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
|
|
brcmfmac-firmware-43430a0-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h3
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m2-plus
|
|
endef
|
|
TARGET_DEVICES += sinovoip_bpi-m2-plus
|
|
|
|
define Device/sinovoip_bpi-m3
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Sinovoip
|
|
DEVICE_MODEL := Banana Pi M3
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-leds-gpio kmod-rtc-ac100 \
|
|
kmod-brcmfmac cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-a83t
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-m3
|
|
endef
|
|
TARGET_DEVICES += sinovoip_bpi-m3
|
|
|
|
define Device/sinovoip_bpi-p2-zero
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Sinovoip
|
|
DEVICE_MODEL := Banana Pi P2 Zero
|
|
DEVICE_PACKAGES:=kmod-leds-gpio kmod-brcmfmac \
|
|
cypress-firmware-43430-sdio wpad-basic-mbedtls
|
|
SOC := sun8i-h2-plus
|
|
SUNXI_DTS := $$(SUNXI_DTS_DIR)$$(SOC)-bananapi-p2-zero
|
|
endef
|
|
TARGET_DEVICES += sinovoip_bpi-p2-zero
|
|
|
|
define Device/xunlong_orangepi-one
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi One
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-one
|
|
|
|
define Device/xunlong_orangepi-pc
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi PC
|
|
DEVICE_PACKAGES:=kmod-gpio-button-hotplug
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-pc
|
|
|
|
define Device/xunlong_orangepi-pc-plus
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi PC Plus
|
|
DEVICE_PACKAGES:=kmod-gpio-button-hotplug
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-pc-plus
|
|
|
|
define Device/xunlong_orangepi-plus
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi Plus
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-plus
|
|
|
|
define Device/xunlong_orangepi-r1
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi R1
|
|
DEVICE_PACKAGES:=kmod-usb-net-rtl8152
|
|
SOC := sun8i-h2-plus
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-r1
|
|
|
|
define Device/xunlong_orangepi-zero
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi Zero
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-h2-plus
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-zero
|
|
|
|
define Device/xunlong_orangepi-2
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Xunlong
|
|
DEVICE_MODEL := Orange Pi 2
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-h3
|
|
endef
|
|
TARGET_DEVICES += xunlong_orangepi-2
|
|
|
|
define Device/widora_mangopi-mqdual-t113
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Widora
|
|
DEVICE_MODEL := MangoPi MQDual T113
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-t113s
|
|
endef
|
|
TARGET_DEVICES += widora_mangopi-mqdual-t113
|
|
|
|
define Device/myir_myd-yt113x-emmc
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := MYIR
|
|
DEVICE_MODEL := MYD-YT113X (eMMC)
|
|
DEVICE_PACKAGES := kmod-rtc-sunxi kmod-eeprom-at24 kmod-gpio-pca953x kmod-rtc-rx8025
|
|
SOC := sun8i-t113s
|
|
IMAGE/sdcard.img.gz := sunxi-sdcard | append-metadata | gzip
|
|
endef
|
|
TARGET_DEVICES += myir_myd-yt113x-emmc
|
|
|
|
define Device/myir_myd-yt113x-spi
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := MYIR
|
|
DEVICE_MODEL := MYD-YT113X (SPI)
|
|
DEVICE_PACKAGES := kmod-rtc-sunxi kmod-eeprom-at24 kmod-gpio-pca953x kmod-rtc-rx8025
|
|
SOC := sun8i-t113s
|
|
endef
|
|
TARGET_DEVICES += myir_myd-yt113x-spi
|
|
|
|
define Device/olimex_olinuxino
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Olimex
|
|
DEVICE_MODEL := Olinuxino T113
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi
|
|
SOC := sun8i-t113s
|
|
IMAGE/sdcard.img.gz := sunxi-sdcard | append-metadata | gzip
|
|
endef
|
|
TARGET_DEVICES += olimex_olinuxino
|
|
|
|
define Device/rongpin_rp-t113
|
|
$(call Device/FitImageGzip)
|
|
DEVICE_VENDOR := Rongpin
|
|
DEVICE_MODEL := RP-T113
|
|
DEVICE_PACKAGES:=kmod-rtc-sunxi kmod-rtl8xxxu rtl8723bu-firmware wpad-basic-mbedtls
|
|
SOC := sun8i-t113s
|
|
IMAGE/sdcard.img.gz := sunxi-sdcard | append-metadata | gzip
|
|
endef
|
|
TARGET_DEVICES += rongpin_rp-t113
|