785492e4c1
The Zyxel NWA110AX is a dual band 2x2:2 802.11ax wireless access point with PoE. The device is very similar to the NWA210AX except for being 2x2 instead of 4x4 in the 5GHz band and not having the 2.5GbE ethernet port. This commit factors out a common DTS and device definition and reuses it for both devices. Hardware: * SoC: Qualcomm IPQ8070A * RAM: 1GiB 1x Samsung K4A8G165WC-BCTD * Flash: 8MiB Winbond W25Q64DW SPI-NOR, 256MiB Winbond W29N02GZ SPI-NAND * WLAN 2.4GHz: QCN5024 2x2:2 802.11b/g/n/ax * WLAN 5GHz: QCN5054 2x2:2 802.11n/ac/ax * Ethernet: 1x 1GbE with AR8033 PHY * Serial Config: 3.3V TTL 115200-8-N-1, externally accessible * Serial Layout: GND TX RX 3.3V (don't connect, marked with triangle) * LEDs: 1x red, 1x green, 1x blue, 1x white * Buttons: 1x reset MAC addresses: * Uplink: base address on label * 2.4GHz WLAN: base + 1 * 5GHZ WLAN: base + 2 Flashing Notes: The device uses a dual-image setup and OpenWrt can only be installed as image 0. When the currently running stock firmware is image 0, OpenWrt will be installed as image 1, fail to boot and the device returns to stock firmware. If this happens, install any version of stock firmware so that it runs as image 1, before installing OpenWrt. Alternatively, if there already is a valid stock firmware in image 1, the "debug dual-image show" and "debug dual-image set boot-image image1" commands can be used in the stock CLI via serial/SSH/telnet to switch to image 1. Flashing with Stock Web Interface: * Get the OpenWrt factory image and rename it to a shorter name, for example "openwrt.bin" (the stock firmware has a character limit) * In the web interface, go to "Maintenance" -> "File Manager" -> "Firmware Package" (or click the link next to "Firmware Version" under "Device Information" on the dashboard) * Under "Upload File" browse to the renamed OpenWrt factory image and click on "Upload" Switch Boot Image: * OpenWrt to stock: "zyxel-bootconfig-ipq807x set image1" * Stock to OpenWrt: "debug dual-image set boot-image image0" Unbrick / Revert to Stock with the Boot Module: * Disconnect the device from power * Configure your machine to 192.168.1.103/24 and start a TFTP server * Put the stock firmware image into the TFTP server root and rename it to "ZLD-current" * Establish a serial connection to the device through the console port * Connect the device to power * When prompted, press a key to abort automatic boot and enter debug mode * Use the "atnz" command to flash the firmware image * Use the "atgo" command to boot from the newly flashed image Signed-off-by: Michael Lotz <mmlr@mlotz.ch> Link: https://github.com/openwrt/openwrt/pull/21849 Signed-off-by: Robert Marko <robimarko@gmail.com>
315 lines
13 KiB
Makefile
315 lines
13 KiB
Makefile
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/version.mk
|
|
|
|
PKG_NAME:=ipq-wifi
|
|
PKG_RELEASE:=1
|
|
|
|
PKG_SOURCE_PROTO:=git
|
|
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
|
|
PKG_SOURCE_DATE:=2026-02-13
|
|
PKG_SOURCE_VERSION:=30241cba74cf4d80aecfd8620fa7e75110a85629
|
|
PKG_MIRROR_HASH:=489563ba9dee291c230b6b5052b6192e6528109993697ff8056020726e246ceb
|
|
PKG_FLAGS:=nonshared
|
|
|
|
include $(INCLUDE_DIR)/package.mk
|
|
|
|
define Build/Compile
|
|
endef
|
|
|
|
# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
|
|
# to generate the board-* files here.
|
|
#
|
|
# This is intended to be used on an interim basis until device-specific
|
|
# board data for new devices is available through the upstream compilation
|
|
#
|
|
# Please send a mail with your device-specific board files upstream.
|
|
# You can find instructions and examples on the linux-wireless wiki:
|
|
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
|
|
|
|
ALLWIFIBOARDS:= \
|
|
8devices_kiwi \
|
|
8devices_mango \
|
|
alfa-network_ap120c-ax \
|
|
aliyun_ap8220 \
|
|
arcadyan_aw1000 \
|
|
asus_rt-ax89x \
|
|
buffalo_wxr-5950ax12 \
|
|
cambiumnetworks_xe34 \
|
|
cmcc_rm2-6 \
|
|
compex_wpq873 \
|
|
dynalink_dl-wrx36 \
|
|
edgecore_eap102 \
|
|
edimax_cax1800 \
|
|
elecom_wrc-x3000gs2 \
|
|
glinet_gl-ax1800 \
|
|
glinet_gl-axt1800 \
|
|
glinet_gl-b3000 \
|
|
ignitenet_ss-w2-ac2600 \
|
|
iodata_wn-dax3000gr \
|
|
jdcloud_re-cs-02 \
|
|
jdcloud_re-ss-01 \
|
|
linksys_homewrk \
|
|
linksys_mr5500 \
|
|
linksys_mr6350 \
|
|
linksys_mr7350 \
|
|
linksys_mr7500 \
|
|
linksys_mx2000 \
|
|
linksys_mx4200 \
|
|
linksys_mx5300 \
|
|
linksys_mx5500 \
|
|
linksys_mx6200 \
|
|
linksys_mx8500 \
|
|
linksys_spnmx56 \
|
|
linksys_whw03 \
|
|
meraki_mr30h \
|
|
meraki_underdog \
|
|
meraki_z3 \
|
|
netgear_lbr20 \
|
|
netgear_rax120v2 \
|
|
netgear_rbk20 \
|
|
netgear_rbk40 \
|
|
netgear_rbk350 \
|
|
netgear_rbk750 \
|
|
netgear_sxk80 \
|
|
netgear_wax214 \
|
|
netgear_wax218 \
|
|
netgear_wax610 \
|
|
netgear_wax610y \
|
|
netgear_wax620 \
|
|
netgear_wax630 \
|
|
prpl_haze \
|
|
qihoo_360v6 \
|
|
qnap_301w \
|
|
redmi_ax6 \
|
|
skspruce_wia3300-20 \
|
|
spectrum_sax1v1k \
|
|
tcl_linkhub-hh500v \
|
|
tplink_deco-x80-5g \
|
|
tplink_eap610-outdoor \
|
|
tplink_eap620hd-v1 \
|
|
tplink_eap620-hd-v3 \
|
|
tplink_eap623-outdoor-hd-v1 \
|
|
tplink_eap625-outdoor-hd-v1 \
|
|
tplink_eap660hd-v1 \
|
|
tplink_archer-c59-v1 \
|
|
tplink_archer-c6-v2 \
|
|
tplink_archer-c60-v1 \
|
|
tplink_archer-c60-v2 \
|
|
tplink_tl-wa1201-v2 \
|
|
wallys_dr40x9 \
|
|
xiaomi_aiot-ac2350 \
|
|
xiaomi_ax3600 \
|
|
xiaomi_ax6000 \
|
|
xiaomi_ax9000 \
|
|
yyets_le1 \
|
|
yuncore_ax830 \
|
|
yuncore_ax850 \
|
|
yuncore_ax880 \
|
|
yuncore_fap650 \
|
|
zbtlink_zbt-z800ax \
|
|
zte_mf269 \
|
|
zte_mf286ar\
|
|
zte_mf286c \
|
|
zte_mf287 \
|
|
zte_mf287plus \
|
|
zyxel_nbg7815 \
|
|
zyxel_nwa110ax \
|
|
zyxel_nwa210ax \
|
|
zyxel_scr50axe
|
|
|
|
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
|
|
|
|
define Package/ipq-wifi-default
|
|
SUBMENU:=ath10k Board-Specific Overrides
|
|
SECTION:=firmware
|
|
CATEGORY:=Firmware
|
|
DEPENDS:=@(TARGET_ath79||TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax||TARGET_qualcommbe)
|
|
TITLE:=Custom Board
|
|
endef
|
|
|
|
define ipq-wifi-install-one-to
|
|
$(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
|
|
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
|
|
endef
|
|
|
|
define ipq-wifi-install-ath11-one-to
|
|
$(INSTALL_DIR) $(2)/lib/firmware/ath11k/$(3)/
|
|
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
|
|
endef
|
|
|
|
define ipq-wifi-install-ath12-one-to
|
|
$(INSTALL_DIR) $(2)/lib/firmware/ath12k/$(3)/
|
|
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath12k/$(3)/board-2.bin
|
|
endef
|
|
|
|
define ipq-wifi-install-one
|
|
$(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
|
|
$(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCA9988 .qca9988),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
|
|
$(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
|
|
$(if $(filter $(suffix $(1)),.IPQ5018 .ipq5018),\
|
|
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ5018/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.IPQ6018 .ipq6018),\
|
|
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ6018/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
|
|
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
|
|
$(if $(filter $(suffix $(1)),.QCN6122 .qcn6122),\
|
|
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN6122/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
|
|
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
|
|
$(if $(filter $(suffix $(1)),.QCN9274 .qcn9274),\
|
|
$(call ipq-wifi-install-ath12-one-to,$(1),$(2),QCN9274/hw2.0),\
|
|
$(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
|
|
))))))))))))
|
|
|
|
endef
|
|
# Blank line required at end of above define due to foreach context
|
|
|
|
define generate-ipq-wifi-package
|
|
define Package/ipq-wifi-$(1)
|
|
$(call Package/ipq-wifi-default)
|
|
TITLE:=board-2.bin Overrides for $(2)
|
|
CONFLICTS:=$(PREV_BOARD)
|
|
endef
|
|
|
|
define Package/ipq-wifi-$(1)/description
|
|
The $(2) requires board-specific, reference ("cal") data
|
|
that is not yet present in the upstream wireless firmware distribution.
|
|
|
|
This package supplies board-2.bin file(s) that, in the interim,
|
|
overwrite those supplied by the ath10k-firmware-* packages.
|
|
|
|
This is package is only necessary for the $(2).
|
|
|
|
Do not install it for any other device!
|
|
endef
|
|
|
|
define Package/ipq-wifi-$(1)/install-overlay
|
|
$$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
|
|
$$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
|
|
endef
|
|
|
|
PREV_BOARD+=ipq-wifi-$(1)
|
|
endef
|
|
|
|
# To add local files for testing:
|
|
# 1. create a new directory in the ipq-wifi package directory called "files".
|
|
# 2. place there the needed board files.
|
|
#
|
|
# To send a board file upstream:
|
|
# 1. create a pull request in https://github.com/openwrt/firmware_qca-wireless or
|
|
# send a patch to the mailing list adding the tag firmware/qca-wireless before
|
|
# the PATCH tag.
|
|
# 2. create a pull request in the main openwrt repository bumping the ipq-wifi
|
|
# package to the new version and adding the required lines to add the board file.
|
|
#
|
|
# Changes needed to the ipq-wifi Makefile:
|
|
# 1. Add board name to ALLWIFIBOARDS
|
|
# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
|
|
#
|
|
# Board files should follow this name structure:
|
|
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq6018|ipq8074>
|
|
|
|
$(eval $(call generate-ipq-wifi-package,8devices_kiwi,8devices Kiwi))
|
|
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
|
|
$(eval $(call generate-ipq-wifi-package,alfa-network_ap120c-ax,ALFA Network AP120C-AX))
|
|
$(eval $(call generate-ipq-wifi-package,aliyun_ap8220,Aliyun AP8220))
|
|
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
|
|
$(eval $(call generate-ipq-wifi-package,asus_rt-ax89x,Asus RT-AX89X))
|
|
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
|
|
$(eval $(call generate-ipq-wifi-package,cambiumnetworks_xe34,Cambium Networks XE3-4))
|
|
$(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6))
|
|
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
|
|
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
|
|
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
|
|
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
|
|
$(eval $(call generate-ipq-wifi-package,elecom_wrc-x3000gs2,ELECOM WRC-X3000GS2))
|
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-ax1800,GL.iNet GL-AX1800))
|
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-axt1800,GL.iNet GL-AXT1800))
|
|
$(eval $(call generate-ipq-wifi-package,glinet_gl-b3000,GL.iNet GL-B3000))
|
|
$(eval $(call generate-ipq-wifi-package,ignitenet_ss-w2-ac2600,Ignitenet SS-W2-AC2600))
|
|
$(eval $(call generate-ipq-wifi-package,iodata_wn-dax3000gr,I-O DATA WN-DAX3000GR))
|
|
$(eval $(call generate-ipq-wifi-package,jdcloud_re-cs-02,JDCloud RE-CS-02))
|
|
$(eval $(call generate-ipq-wifi-package,jdcloud_re-ss-01,JDCloud RE-SS-01))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_homewrk,Linksys HomeWRK))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mr5500,Linksys MR5500))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mr6350,Linksys MR6350))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mr7500,Linksys MR7500))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx2000,Linksys MX2000))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx5500,Linksys MX5500))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx6200,Linksys MX6200))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_mx8500,Linksys MX8500))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_spnmx56,Linksys SPNMX56))
|
|
$(eval $(call generate-ipq-wifi-package,linksys_whw03,Linksys WHW03))
|
|
$(eval $(call generate-ipq-wifi-package,meraki_mr30h,Meraki MR30H))
|
|
$(eval $(call generate-ipq-wifi-package,meraki_underdog,Meraki underdog))
|
|
$(eval $(call generate-ipq-wifi-package,meraki_z3,Meraki Z3))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_rbk20,Netgear RBK20))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_rbk40,Netgear RBK40))
|
|
<<<<<<< HEAD
|
|
$(eval $(call generate-ipq-wifi-package,netgear_rbk750,Netgear RBK750))
|
|
=======
|
|
$(eval $(call generate-ipq-wifi-package,netgear_rbk350,Netgear RBK350))
|
|
>>>>>>> fb4c0dd54e (qualcommax: ipq60xx: add Netgear RBx350 support)
|
|
$(eval $(call generate-ipq-wifi-package,netgear_sxk80,Netgear SXK80))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax610,Netgear WAX610))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax610y,Netgear WAX610Y))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
|
|
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
|
|
$(eval $(call generate-ipq-wifi-package,qihoo_360v6,Qihoo 360V6))
|
|
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
|
|
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
|
|
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
|
|
$(eval $(call generate-ipq-wifi-package,skspruce_wia3300-20,SKSpruce WIA3300-20))
|
|
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
|
|
$(eval $(call generate-ipq-wifi-package,tcl_linkhub-hh500v,TCL LINKHUB HH500V))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_deco-x80-5g,TP-Link Deco X80-5G))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap610-outdoor,TPLink EAP610-Outdoor))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap620hd-v1,TP-Link EAP620 HD v1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap620-hd-v3,TP-Link EAP620 HD v3))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap623-outdoor-hd-v1,TP-Link EAP623-Outdoor HD v1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap625-outdoor-hd-v1,TP-Link EAP625-Outdoor HD v1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_eap660hd-v1,TP-Link EAP660 HD v1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_archer-c59-v1,TP-Link Archer C59 V1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_archer-c6-v2,TP-Link Archer C6 V2))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_archer-c60-v1,TP-Link Archer C60 V1))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_archer-c60-v2,TP-Link Archer C60 V2))
|
|
$(eval $(call generate-ipq-wifi-package,tplink_tl-wa1201-v2,TP-Link TL-WA1201 V2))
|
|
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
|
|
$(eval $(call generate-ipq-wifi-package,xiaomi_aiot-ac2350,Xiaomi AIoT AC2350))
|
|
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
|
|
$(eval $(call generate-ipq-wifi-package,xiaomi_ax6000,Xiaomi AX6000))
|
|
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
|
|
$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
|
|
$(eval $(call generate-ipq-wifi-package,yuncore_ax830,Yuncore AX830))
|
|
$(eval $(call generate-ipq-wifi-package,yuncore_ax850,Yuncore AX850))
|
|
$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
|
|
$(eval $(call generate-ipq-wifi-package,yuncore_fap650,Yuncore FAP650))
|
|
$(eval $(call generate-ipq-wifi-package,zbtlink_zbt-z800ax,Zbtlink ZBT-Z800AX))
|
|
$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
|
|
$(eval $(call generate-ipq-wifi-package,zte_mf286ar,ZTE MF286A/R))
|
|
$(eval $(call generate-ipq-wifi-package,zte_mf286c,ZTE MF286C))
|
|
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
|
|
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
|
|
$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
|
|
$(eval $(call generate-ipq-wifi-package,zyxel_nwa110ax,Zyxel NWA110AX))
|
|
$(eval $(call generate-ipq-wifi-package,zyxel_nwa210ax,Zyxel NWA210AX))
|
|
$(eval $(call generate-ipq-wifi-package,zyxel_scr50axe,Zyxel SCR50AXE))
|
|
|
|
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
|