The rtl9300,smi-address property was first developed for the RTL930x
targets. So it got a device specific prefix. Nowadays it is used for
RTL931x targets too. Convert it to our gerneric realtek prefix.
find ./realtek -type f -exec sed -i 's/rtl9300,smi-address/realtek,smi-address/g' {} +
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21343
Signed-off-by: Robert Marko <robimarko@gmail.com>
269 lines
4.6 KiB
Plaintext
269 lines
4.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/dts-v1/;
|
|
|
|
#include "rtl930x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "hasivo,s1100w-8xgt-se", "realtek,rtl930x-soc";
|
|
model = "Hasivo S1100W-8XGT-SE";
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>, /* 256 MiB lowmem */
|
|
<0x20000000 0x10000000>; /* 256 MiB highmem */
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_sys;
|
|
led-failsafe = &led_sys;
|
|
led-running = &led_sys;
|
|
led-upgrade = &led_sys;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:38400n8";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_sys: led-0 {
|
|
gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
};
|
|
|
|
led_set {
|
|
compatible = "realtek,rtl9300-leds";
|
|
active-low;
|
|
|
|
/*
|
|
* LED set 0
|
|
*
|
|
* - LED[0](Amber): 5G/LINK/ACT
|
|
* - LED[1](Green): 10G/LINK/ACT
|
|
* - LED[2](Amber): 1G/100M/10M/LINK/ACT
|
|
* - LED[3](Green): 2.5G/LINK/ACT
|
|
*/
|
|
led_set0 = <0x0a02 0x0a01 0x0ba0 0x0a08>;
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* stock is LOADER */
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x00e0000>;
|
|
read-only;
|
|
};
|
|
|
|
/* stock is BDINFO */
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00e0000 0x0010000>;
|
|
};
|
|
|
|
/* stock is SYSINFO */
|
|
partition@f0000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x00f0000 0x0010000>;
|
|
read-only;
|
|
};
|
|
|
|
/* stock is JFFS2_CFG */
|
|
partition@100000 {
|
|
label = "jffs";
|
|
reg = <0x0100000 0x0100000>;
|
|
};
|
|
|
|
/* stock is JFFS2_LOG */
|
|
partition@200000 {
|
|
label = "jffs2";
|
|
reg = <0x0200000 0x0100000>;
|
|
};
|
|
|
|
/* stock is RUNTIME */
|
|
partition@300000 {
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x0300000 0x0c00000>;
|
|
};
|
|
|
|
/* stock is OEMINFO */
|
|
partition@f00000 {
|
|
label = "oeminfo";
|
|
reg = <0x0f00000 0x0100000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio_bus0 {
|
|
phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <0 0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
phy8: ethernet-phy@8 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <0 1>;
|
|
reg = <8>;
|
|
};
|
|
|
|
phy16: ethernet-phy@16 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <0 2>;
|
|
reg = <16>;
|
|
};
|
|
|
|
phy20: ethernet-phy@20 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <0 3>;
|
|
reg = <20>;
|
|
};
|
|
|
|
phy24: ethernet-phy@24 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <3 16>;
|
|
reg = <24>;
|
|
};
|
|
|
|
phy25: ethernet-phy@25 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <3 17>;
|
|
reg = <25>;
|
|
};
|
|
|
|
phy26: ethernet-phy@26 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <3 18>;
|
|
reg = <26>;
|
|
};
|
|
|
|
phy27: ethernet-phy@27 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
realtek,smi-address = <3 19>;
|
|
reg = <27>;
|
|
};
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan1";
|
|
pcs-handle = <&serdes2>;
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
label = "lan2";
|
|
pcs-handle = <&serdes3>;
|
|
phy-handle = <&phy8>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@16 {
|
|
reg = <16>;
|
|
label = "lan3";
|
|
pcs-handle = <&serdes4>;
|
|
phy-handle = <&phy16>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@20 {
|
|
reg = <20>;
|
|
label = "lan4";
|
|
pcs-handle = <&serdes5>;
|
|
phy-handle = <&phy20>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@24 {
|
|
reg = <24>;
|
|
label = "lan5";
|
|
pcs-handle = <&serdes6>;
|
|
phy-handle = <&phy24>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@25 {
|
|
reg = <25>;
|
|
label = "lan6";
|
|
pcs-handle = <&serdes7>;
|
|
phy-handle = <&phy25>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@26 {
|
|
reg = <26>;
|
|
label = "lan7";
|
|
pcs-handle = <&serdes8>;
|
|
phy-handle = <&phy26>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
port@27 {
|
|
reg = <27>;
|
|
label = "lan8";
|
|
pcs-handle = <&serdes9>;
|
|
phy-handle = <&phy27>;
|
|
phy-mode = "usxgmii";
|
|
led-set = <0>;
|
|
};
|
|
|
|
/* Internal SoC */
|
|
port@28 {
|
|
ethernet = <ðernet0>;
|
|
reg = <28>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <10000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|