catspeed-cc/openwrt
1
1
Fork 0
Code
8bd9f4fca1
openwrt/target/linux/ramips
History
librarat876 0197c88151 ramips: mt76x8: add support for MovingComm C120EV 
Add support for the MovingComm C120EV 4G LTE router based on MT7628AN.

Hardware specification:
- SoC: MediaTek MT7628AN (580MHz)
- RAM: 64 MiB DDR2
- Flash: 16 MiB SPI NOR
- WiFi: 2.4 GHz (internal) + 5 GHz (MT7663 via PCIe)
- Ethernet: 4x 10/100Mbps
- USB: 1x USB 2.0 (internal only)
- Modem: Thinkwill ML7820+ (manual configuration required)
- UART: 57600 8N1
- Power: 12V DC, 1A

Flash instructions:
The stock firmware is OpenWrt-based (Chaos Calmer 15.05.1).
Flash the OpenWrt sysupgrade image via vendor Web UI at 192.168.99.1
(admin/admin), section System - Firmware Upgrade.

Recovery (requires UART access):
- UART: Connect to ttyS0 @ 57600, press 4 during boot delay (5 seconds)
- TFTP: Server 10.10.10.3, client 10.10.10.123, load image to 0x80000000

MAC address layout:
- LAN: factory 0x04
- WAN: factory 0x28 (02_network)
- 2.4GHz: factory 0x2e
- 5GHz: factory 0x8004 (PCIe EEPROM)

Signed-off-by: librarat876 <bloproton92@proton.me>
Link: https://github.com/openwrt/openwrt/pull/23273
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2026-05-14 16:39:35 +02:00
..
base-files/etc ramips: remove model name from LED labels 2020-10-02 14:51:57 +02:00
dts ramips: mt76x8: add support for MovingComm C120EV 2026-05-14 16:39:35 +02:00
files/drivers treewide: use _scoped for loop 2026-04-16 21:17:43 +02:00
image ramips: mt76x8: add support for MovingComm C120EV 2026-05-14 16:39:35 +02:00
mt76x8 ramips: mt76x8: add support for MovingComm C120EV 2026-05-14 16:39:35 +02:00
mt7620 ramips: drop 6.12 support 2026-04-28 09:44:04 +02:00
mt7621 ramips: add support for Ruijie RG-EW1300G (V1.00) 2026-05-14 14:17:18 +02:00
patches-6.18 kernel: bump 6.18 to 6.18.22 2026-04-30 01:14:12 +02:00
rt288x ramips: drop 6.12 support 2026-04-28 09:44:04 +02:00
rt305x ramips: drop 6.12 support 2026-04-28 09:44:04 +02:00
rt3883 ramips: drop 6.12 support 2026-04-28 09:44:04 +02:00
Makefile ramips: use kernel 6.18 by default 2026-04-28 09:44:03 +02:00
modules.mk ramips: mt76x8: drop downstream PWM driver support 2026-03-16 01:30:03 +01:00