8d9103a420
Improve the readability of the DTS files for XS1930 switches by mostly making nodes with only a single property a one-liner. This wastes less visual space and makes it more fluent to read. Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com> Link: https://github.com/openwrt/openwrt/pull/23428 Signed-off-by: Robert Marko <robimarko@gmail.com>
91 lines
2.1 KiB
Plaintext
91 lines
2.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/dts-v1/;
|
|
|
|
#include "rtl9313_zyxel_xs1930-aqr813.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/mux/mux.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
/ {
|
|
compatible = "zyxel,xs1930-12hp", "realtek,rtl9313-soc";
|
|
model = "Zyxel XS1930-12HP";
|
|
|
|
leds {
|
|
led_poe_max: led-7 {
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = "poe-usage";
|
|
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&led_set {
|
|
/* Phantom port chain padding (2 LEDs) */
|
|
led_set1 = <RTL93XX_LED_SET_NONE
|
|
RTL93XX_LED_SET_NONE>;
|
|
|
|
/* The LED PCB has two daisy-chained RTL8231 in scan mode.
|
|
* Net LEDs for P3-P12 are on the first RTL8231, P1/P2
|
|
* net LEDs are on the second. The 12 real ports provide
|
|
* 36 LED bits but the chain requires 65 bits to correctly
|
|
* span both chips. Phantom ports 1-7, 9-10 (set0, 3 LEDs
|
|
* each) and port 11 (set1, 2 LEDs) pad the chain with
|
|
* the remaining 29 bits.
|
|
*/
|
|
realtek,led-set0-force-port-mask = <0x00000000 0x000006FE>;
|
|
realtek,led-set1-force-port-mask = <0x00000000 0x00000800>;
|
|
};
|
|
|
|
&led_sys_green { gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; };
|
|
&led_sys_red { gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; };
|
|
|
|
&gpio0 {
|
|
poe_enable_hog {
|
|
gpio-hog;
|
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "poe-enable";
|
|
};
|
|
};
|
|
|
|
&i2c_mst1 {
|
|
/* PoE management MCU sits here */
|
|
i2c3: i2c@3 { reg = <3>; };
|
|
};
|
|
|
|
&mdio_ctrl {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinmux_enable_mdc_mdio_0>,
|
|
<&pinmux_enable_mdc_mdio_1>,
|
|
<&pinmux_enable_mdc_mdio_2>;
|
|
};
|
|
|
|
&mdio_bus1 {
|
|
PHY_C45(52, 0) /* AQR113C */
|
|
};
|
|
|
|
&mdio_bus2 {
|
|
PHY_C45(53, 8) /* AQR113C */
|
|
};
|
|
|
|
&switch0 {
|
|
ethernet-ports {
|
|
/* Copper ports behind AQR113C */
|
|
SWITCH_PORT_LED(52, 9, 10, 0, usxgmii)
|
|
SWITCH_PORT_LED(53, 10, 11, 0, usxgmii)
|
|
|
|
SWITCH_PORT_SFP(54, 11, 12, 0, 1)
|
|
SWITCH_PORT_SFP(55, 12, 13, 0, 2)
|
|
};
|
|
};
|
|
|
|
&port52 { managed = "in-band-status"; };
|
|
&port53 { managed = "in-band-status"; };
|
|
|
|
&serdes10 { tx-polarity = <PHY_POL_INVERT>; };
|
|
&serdes11 { tx-polarity = <PHY_POL_INVERT>; };
|
|
|