a3105d3f95
The Globitel BT-R320 (PCB rev V1.2) is an enterprise/ISP Wi-Fi 6 router based on the MediaTek MT7981B (Filogic 820) platform. Hardware specifications: SoC: MediaTek MT7981B (Filogic 820) RAM: 1GB DDR4 (Nanya NT5AD512M16C4-HR) Flash: 128GB eMMC (UNIC UNMEN07GC4C31BS) Switch: MediaTek MT7531AE Ethernet: 1x 1GbE WAN, 3x 1GbE LAN Wi-Fi: 2.4 GHz: 2x2 MT7976CN and 5 GHz: 2x2 MT7976CN (integrated FEM) USB: 1x USB 3.0 LEDs: 2x Green (WLAN 2.4G / 5G) Buttons: 1x Reset (GPIO 1, ACTIVE_LOW), 1x WPS (GPIO 0, ACTIVE_LOW) Power: 12V, 1.5A UART: 115200 8n1 Note on eMMC configuration (Addressing 52MHz limit on 128GB IC): Debugfs output from the OEM firmware (/sys/kernel/debug/mmc0/ios) confirms the manufacturer deliberately limits the eMMC to 52MHz High-Speed mode at 3.3V (actual clock: 52000000 Hz, bus width: 8 bits, timing spec: mmc high-speed). Therefore, the conservative DTS properties (max-frequency = <52000000> and lack of HS200/HS400 support) strictly reflect the OEM hardware design. Installation instructions: 1. SSH into the stock router (192.168.132.1, user: root, pass: password). 2. Back up existing partitions using dd. 3. Upload the OpenWrt-built GPT partition table (*-gpt.bin) and flash it: dd if=/tmp/gpt.bin of=/dev/mmcblk0 bs=512 count=34 conv=fsync echo -e 'w' | fdisk /dev/mmcblk0 4. Flash the OpenWrt-built U-Boot (*-bl31-uboot.fip) to the FIP partition: dd if=/tmp/uboot.fip of=$(blkid -t PARTLABEL=fip -o device) conv=fsync 5. Disconnect power. Connect PC with static IP 192.168.1.2. 6. Hold reset button, power on, and wait 10 seconds to enter U-Boot web UI. 7. Flash the OpenWrt sysupgrade image. Stock partition layout: p1: uboot_env p2: factory p3: fip p4: kernel p5: rootfs p6: userdata MAC address layout (factory partition, mmcblk0p2): WAN: xx:xx:xx:xx:xx:xx (factory offset 0x24) LAN: xx:xx:xx:xx:xx:xy (factory offset 0x2a) Label: Matches LAN MAC (0x2a) 2.4G: Base MAC (extracted from factory offset 0x4) 5G: Base MAC with Locally Administered bit set Signed-off-by: Kirill Molotov <kirill2015molotov@gmail.com> Link: https://github.com/openwrt/openwrt/pull/23188 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
187 lines
4.3 KiB
Plaintext
187 lines
4.3 KiB
Plaintext
#
|
|
# Copyright (C) 2021 OpenWrt.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
ubootenv_add_mmc_default() {
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x0" "0x40000" "0x40000" "1"
|
|
ubootenv_add_mmc "ubootenv" "${1:-mmcblk0}" "0x40000" "0x40000" "0x40000" "1"
|
|
}
|
|
|
|
ubootenv_add_nor_default() {
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
ubootenv_add_mtd "u-boot-env" "0x20000" "0x20000" "0x20000" "1"
|
|
}
|
|
|
|
case "$board" in
|
|
abt,asr3000|\
|
|
acer,predator-w6x-ubootmod|\
|
|
asus,zenwifi-bt8-ubootmod|\
|
|
cmcc,a10-ubootmod|\
|
|
comfast,cf-wr632ax-ubootmod|\
|
|
cudy,tr3000-v1-ubootmod|\
|
|
cudy,wbr3000uax-v1-ubootmod|\
|
|
cudy,wr3000e-v1-ubootmod|\
|
|
cudy,wr3000s-v1-ubootmod|\
|
|
cudy,wr3000h-v1-ubootmod|\
|
|
cudy,wr3000p-v1-ubootmod|\
|
|
h3c,magic-nx30-pro|\
|
|
imou,hx21|\
|
|
jcg,q30-pro|\
|
|
konka,komi-a31|\
|
|
mercusys,mr90x-v1-ubi|\
|
|
netcore,n60|\
|
|
netcore,n60-pro|\
|
|
netis,nx30v2|\
|
|
netis,nx31|\
|
|
netis,nx32u|\
|
|
nokia,ea0326gmp|\
|
|
openwrt,one|\
|
|
qihoo,360t7|\
|
|
qihoo,360t7-ubi|\
|
|
routerich,ax3000-ubootmod|\
|
|
routerich,be7200|\
|
|
snr,snr-cpe-ax2|\
|
|
tplink,tl-xdr4288|\
|
|
tplink,tl-xdr6086|\
|
|
tplink,tl-xdr6088|\
|
|
tplink,tl-xtr8488|\
|
|
wavlink,wl-wnt100x3-ubootmod|\
|
|
xiaomi,mi-router-ax3000t-ubootmod|\
|
|
xiaomi,mi-router-wr30u-ubootmod|\
|
|
xiaomi,redmi-router-ax6000-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
acer,predator-w6|\
|
|
acer,predator-w6d|\
|
|
acer,vero-w6m|\
|
|
glinet,gl-mt2500|\
|
|
glinet,gl-mt2500-airoha|\
|
|
glinet,gl-mt6000|\
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000|\
|
|
globitel,bt-r320|\
|
|
huasifei,wh3000|\
|
|
nradio,c8-668gl)
|
|
ubootenv_add_mmc "u-boot-env" "" "0x0" "0x80000"
|
|
;;
|
|
asiarf,ap7986-003|\
|
|
cetron,ct3003|\
|
|
comfast,cf-wr632ax|\
|
|
edgecore,eap111|\
|
|
netgear,wax220|\
|
|
zbtlink,zbt-z8102ax|\
|
|
zbtlink,zbt-z8103ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
asus,rt-ax59u)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
|
|
;;
|
|
bananapi,bpi-r3|\
|
|
bananapi,bpi-r3-mini|\
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-lite|\
|
|
bananapi,bpi-r4-poe|\
|
|
cmcc,rax3000m|\
|
|
jdcloud,re-cp-03)
|
|
. /lib/upgrade/fit.sh
|
|
export_fitblk_bootdev
|
|
case "$CI_METHOD" in
|
|
ubi)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
emmc)
|
|
bootdev=${EMMC_KERN_DEV%%p[0-9]*}
|
|
ubootenv_add_mmc_default "${bootdev#/dev/}"
|
|
;;
|
|
default)
|
|
ubootenv_add_nor_default
|
|
;;
|
|
esac
|
|
;;
|
|
buffalo,wsr-3000ax4p|\
|
|
buffalo,wsr-6000ax8|\
|
|
elecom,wrc-x6000gsd|\
|
|
elecom,wrc-x6000qs|\
|
|
mercusys,mr80x-v3|\
|
|
mercusys,mr85x|\
|
|
mercusys,mr90x-v1|\
|
|
routerich,ax3000|\
|
|
routerich,ax3000-v1|\
|
|
tenbay,wr3000k|\
|
|
tplink,re6000xd)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x20000" "1"
|
|
;;
|
|
comfast,cf-e393ax|\
|
|
iptime,ax3000m)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
|
;;
|
|
dlink,aquila-pro-ai-e30-a1|\
|
|
dlink,aquila-pro-ai-m30-a1|\
|
|
dlink,aquila-pro-ai-m60-a1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
|
;;
|
|
gatonetworks,gdsp)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
glinet,gl-mt3000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
|
;;
|
|
jiorouter,ax6000-jidu6101)
|
|
. /lib/upgrade/nand.sh
|
|
envubi=$(nand_find_ubi ubi)
|
|
envdev=/dev/$(nand_find_volume "$envubi" u-boot-env)
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x80000" "0x80000" "1"
|
|
;;
|
|
openembed,som7981)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8733a|\
|
|
smartrg,sdg-8734)
|
|
ubootenv_add_mmc "u-boot-env" "mmcblk0" "0x0" "0x8000" "0x8000"
|
|
;;
|
|
teltonika,rutc50)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
tplink,archer-ax80-v1|\
|
|
tplink,archer-ax80-v1-eu|\
|
|
tplink,be450)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" "8"
|
|
;;
|
|
ubnt,unifi-6-plus)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
|
;;
|
|
xiaomi,mi-router-ax3000t|\
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,redmi-router-ax6000-stock)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
zyxel,ex5601-t0)
|
|
ubootenv_add_mtd "u-boot-env" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5601-t0-ubootmod|\
|
|
zyxel,wx5600-t0-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
ubootenv_add_sys_mtd "u-boot-env" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5700-telenor)
|
|
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|