catspeed-cc/openwrt
1
1
Fork 0
Code
This repository is for TEW-829DRU OpenWRT development purposes only.
68,728 Commits 2 Branches 0 Tags 295 MiB
C 64.8%
Makefile 20.8%
Shell 7.3%
Perl 2.4%
UnrealScript 1.9%
Other 2.6%
a40a1e5d02
Go to file
INAGAKI Hiroshi a40a1e5d02 mediatek: add support for ELECOM WRC-X6000GSD 
ELECOM WRC-X6000GSD is a 4804Mbps 4xMIMO 2.4/5 GHz 11ax (Wi-Fi 6) router
with 2.5Gbps WAN (stock: 1Gbps max.), based on MT7986B

Specification:

- SoC             : MediaTek MT7986BLA
- RAM             : DDR3 512 MiB (SoC)
- Flash           : Winbond 128MiB SPI NAND (W25N01GVZEIG)
- WLAN            : 2.4/5 GHz 4T4R (MediaTek MT7986)
- Ethernet        : 5x 10/100/1000(/2500) Mbps
  - wan           : Maxlinear Ethernet GPY211C (max. 2500M)
  - lan           : MediaTek MT7531 (max. 1000M)
- LEDs/Keys (GPIO): 11x/4x
- UART            : through-hole on PCB (J1)
  - assignment    : 3.3V, TX, RX, NC, GND from tri-angle marking
  - settings      : 115200n8
- Power           : 12 VDC, 2 A

Flash layout:
dev:  offset     size        name
mtd0: 0x00000000 0x00100000 "BL2"
mtd1: 0x00100000 0x00080000 "Ubootenv"
mtd2: 0x00180000 0x00200000 "Factory"
mtd3: 0x00380000 0x00200000 "FIP"
mtd4: 0x00580000 0x00020000 "Fwheader"
mtd5: 0x005a0000 0x03200000 "ubi"
mtd6: 0x037a0000 0x00380000 "Config"
mtd7: 0x03b20000 0x00020000 "Fwheader_2"
mtd8: 0x03b40000 0x03200000 "ubi_2"
mtd9: 0x06d40000 0x00380000 "Config_2"
mtd10: 0x070c0000 0x00100000 "persist"
mtd11: 0x071c0000 0x00040000 "Mrd"
mtd12: 0x07200000 0x00380000 "Backup"

Flash instruction using factory.bin image:

1. Boot WRC-X6000GSD in router mode normally
2. Access to the WebUI ("http://192.168.2.1/") on the device
   -> その他設定 (Other settings)
   -> フォームウェア更新 (Update firmware)
   -> ローカルファイル指定 (Specify local file)
3. Select the OpenWrt factory.bin image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

Switching to the stock firmware:

1. Load the elecom.sh script
   . /lib/upgrade/elecom.sh

2. Check the current index of firmware partition
   mstc_rw_bootnum

3. Set the bootnum to opposite value between 1 and 2
   mstc_rw_bootnum value

   example:
   - step2 returned "1": mstc_rw_bootnum 2
   - step2 returned "2": mstc_rw_bootnum 1

4. Reboot, to stock FW

5. Flash the stock FW to fuly revert back to original.

Notes:

- With the stock firmware, it will flash to another partition and
  toggle boot to that partition when any firmware is flashed.
  For example when booting on ubi, the new firmware will be flashed
  to ubi_2 and the router will boot from ubi_2 afterwards.
  The 5th byte of the Persist partition is the boot value (0x01 or 0x02).

- bootmenu_delay=0 is set from factory so uboot menu is hidden by
  default.

- The hardware of WRC-X6000GSD is almost identical to WRC-X6000QS, but
  WAN (labeled as "INTERNET") port is limited to 1000 Mbps on stock FW.
  On OpenWrt FW, 2500 Mbps connection is available on that port.

MAC Addresses:

LAN   : 38:97:A4:xx:xx:58 (Factory, 0x2A(hex)/Ubootenv, "ethaddr"(text))
WAN   : 38:97:A4:xx:xx:5B (Factory, 0x24(hex))
2.4GHz: 38:97:A4:xx:xx:59 (Factory, 0x4(hex))
5GHz  : 38:97:A4:xx:xx:5A (Factory, 0xA(hex)

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22926
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2026-05-03 01:14:11 +02:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github github: extend LLM review rules with three new categories 2026-05-01 20:12:18 +02:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config x86: make CONFIG_NR_CPUS a tunable (2-512) 2026-03-28 11:51:11 +01:00
include base-files: add warning to distfeeds.list 2026-04-15 10:03:10 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package uboot-tools: envtools: add support for ELECOM WRC-X6000GSD 2026-05-03 01:14:11 +02:00
scripts scripts: add git_commit to profiles.json 2026-04-21 19:47:58 +08:00
target mediatek: add support for ELECOM WRC-X6000GSD 2026-05-03 01:14:11 +02:00
toolchain toolchain: gcc: fix include memory against GCC 16 2026-04-27 10:47:10 +02:00
tools mold: Update to 2.41.0 2026-04-28 09:35:53 +02:00
.gitattributes gitattributes: automatically convert dts file CRLF line endings to LF 2025-11-29 17:52:35 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds: revert to git.openwrt.org 2026-01-09 21:55:00 +01:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk build: do not set CCACHE_COMPILERCHECK 2026-04-22 23:57:01 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0