Rafał Miłecki 5c809ecfe7 b53: Allow using all 8 ports on BCM53011 ... On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 46104		2015-06-21 21:06:09 +00:00
..
b53	b53: Allow using all 8 ports on BCM53011	2015-06-21 21:06:09 +00:00
adm6996.c	kernel: fix compile error inside adm6996.c	2015-02-09 12:09:17 +00:00
adm6996.h	linux/generic: add MIB counters and port status to ADM6996 switch	2014-04-22 08:08:02 +00:00
ar8216.c	ar8216: prefix mii_xxx functions to avoid kernel namespace pollution	2015-01-24 19:42:12 +00:00
ar8216.h	ar8216: prefix mii_xxx functions to avoid kernel namespace pollution	2015-01-24 19:42:12 +00:00
ar8327.c	ar8216: Fix problem with AR8337 MAC swap handling	2015-06-14 17:43:50 +00:00
ar8327.h	ar8216: add swconfig attribute to display ARL table on AR8327/AR8337	2015-01-24 19:42:06 +00:00
ip17xx.c
mvsw61xx.c	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvsw61xx.h	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvswitch.c
mvswitch.h
psb6970.c
rtl8306.c	revert: kernel: rtl8306: fix max pvid & remove port isolation	2014-03-30 10:04:55 +00:00
rtl8366_smi.c	strict_strtoul is obsolete, use kstrtoul instead	2013-07-27 09:23:18 +00:00
rtl8366_smi.h
rtl8366rb.c
rtl8366s.c
rtl8367.c	rtl8367: add support for configuring the VLAN FID	2013-08-12 17:25:25 +00:00
rtl8367b.c
swconfig_leds.c	ar71xx: swconfig: use the local helper to set LED brightness on link down	2014-01-26 16:46:21 +00:00
swconfig.c	swconfig: fix build with linux 4.0	2015-03-06 07:57:03 +00:00