8275b62ecd
This commit adds support for Hasivo S600WP-5GT-2SX-SE switch.
Device specification
--------------------
SoC Type: Realtek RTL9303
RAM: 128MB DDR3 SDRAM
Flash: Fudan FM25Q128A (16 MB)
Ethernet: 5x RTL8221B 10/100/1000/2500Mbps PHY (RJ45)
2x SFP+ 10G (I2C/DOM via bit-banged GPIO)
LEDs: 1x power green (no control)
1x system green (via RTL9303 GPIO)
3x RJ45 LEDs/port (HC595 shift regs on LED SPI)
1x Green (1G link)
1x Green (10M/100M link)
1x Orange (2.5G link)
2x SFP+ LEDs/port (HC595 shift regs on LED SPI)
1x 10G link
1x 1G link
Button: Reset
USB ports: None
Bootloader: Realtek U-Boot 2011.12
PoE: 1x HS104PTI for 802.3af/at/bt PoE (driver
will follow in a separate patch)
Installing OpenWrt
------------------
1. UART RJ45 requires soldering a connector to the empty footprint (RJ1).
(Amphenol RJHSEE380 or similar)
2. Connect to UART 38400@8n1, using Cisco Console Rollover cable (RS232)
3. Enter bootloader by pressing esc key during boot
4. Enter password `Hs2021cfgmg`
5. Type `XXXX` to get into U-Boot
6. Increase baudrate: `setenv baudrate 115200`
7. Use serial transfer (Y modem) via minicom:
`loady 0x84f00000`
Then send the initramfs image via minicom's Y modem upload.
8. `bootm 0x84f00000`
Now you should be in OpenWrt, and can use sysupgrade to install.
Signed-off-by: Carlo Szelinsky <github@szelinsky.de>
Link: https://github.com/openwrt/openwrt/pull/22310
Signed-off-by: Robert Marko <robimarko@gmail.com>
245 lines
5.8 KiB
Makefile
245 lines
5.8 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
include ./common.mk
|
|
|
|
define Device/d-link_dgs-1250-28x
|
|
SOC := rtl9301
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DGS-1250-28X
|
|
DEVICE_PACKAGES += kmod-hwmon-lm75
|
|
IMAGE_SIZE := 24576k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1250-28x
|
|
|
|
define Device/hasivo_s1100w-8xgt-se
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := Hasivo
|
|
DEVICE_MODEL := S1100W-8XGT-SE
|
|
IMAGE_SIZE := 12288k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += hasivo_s1100w-8xgt-se
|
|
|
|
define Device/hasivo_s1100wp-8gt-se
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := Hasivo
|
|
DEVICE_MODEL := S1100WP-8GT-SE
|
|
IMAGE_SIZE := 12288k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += hasivo_s1100wp-8gt-se
|
|
|
|
define Device/hasivo_s600wp-5gt-2sx-se
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := Hasivo
|
|
DEVICE_MODEL := S600WP-5GT-2SX-SE
|
|
IMAGE_SIZE := 12288k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += hasivo_s600wp-5gt-2sx-se
|
|
|
|
define Device/plasmacloud-common
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93000000
|
|
DEVICE_VENDOR := Plasma Cloud
|
|
DEVICE_PACKAGES := poemgr
|
|
IMAGE_SIZE := 15872k
|
|
BLOCKSIZE := 64k
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | pad-to $$(BLOCKSIZE)
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | check-size
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
|
endef
|
|
|
|
define Device/plasmacloud_mcx3
|
|
$(Device/plasmacloud-common)
|
|
DEVICE_MODEL := MCX3
|
|
endef
|
|
TARGET_DEVICES += plasmacloud_mcx3
|
|
|
|
define Device/plasmacloud_psx8
|
|
$(Device/plasmacloud-common)
|
|
DEVICE_MODEL := PSX8
|
|
endef
|
|
TARGET_DEVICES += plasmacloud_psx8
|
|
|
|
define Device/plasmacloud_psx10
|
|
$(Device/plasmacloud-common)
|
|
DEVICE_MODEL := PSX10
|
|
endef
|
|
TARGET_DEVICES += plasmacloud_psx10
|
|
|
|
define Device/tplink_tl-st1008f-v2
|
|
SOC := rtl9303
|
|
UIMAGE_MAGIC := 0x93030000
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := TL-ST1008F
|
|
DEVICE_VARIANT := v2.0
|
|
DEVICE_PACKAGES := kmod-gpio-pca953x
|
|
SUPPORTED_DEVICES += tplink,tl-st1008f,v2
|
|
IMAGE_SIZE := 31808k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-st1008f-v2
|
|
|
|
define Device/vimin_vm-s100-0800ms
|
|
SOC := rtl9303
|
|
UIMAGE_MAGIC := 0x93000000
|
|
DEVICE_VENDOR := Vimin
|
|
DEVICE_MODEL := VM-S100-0800MS
|
|
IMAGE_SIZE := 13312k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += vimin_vm-s100-0800ms
|
|
|
|
define Device/xikestor_sks8300-8t
|
|
SOC := rtl9303
|
|
UIMAGE_MAGIC := 0x93000000
|
|
DEVICE_VENDOR := XikeStor
|
|
DEVICE_MODEL := SKS8300-8T
|
|
DEVICE_PACKAGES := kmod-hwmon-lm75
|
|
IMAGE_SIZE := 20480k
|
|
$(Device/kernel-lzma)
|
|
IMAGE/sysupgrade.bin := \
|
|
pad-extra 16 | \
|
|
append-kernel | \
|
|
pad-to 64k | \
|
|
append-rootfs | \
|
|
pad-rootfs | \
|
|
check-size | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += xikestor_sks8300-8t
|
|
|
|
define Device/xikestor_sks8300-8x
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := XikeStor
|
|
DEVICE_MODEL := SKS8300-8X
|
|
DEVICE_ALT0_VENDOR := ONTi
|
|
DEVICE_ALT0_MODEL := ONT-S508CL-8S
|
|
BLOCKSIZE := 64k
|
|
KERNEL_SIZE := 8192k
|
|
IMAGE_SIZE := 30720k
|
|
IMAGE/sysupgrade.bin := pad-extra 256 | append-kernel | xikestor-nosimg | \
|
|
jffs2 nos.img -e 4KiB -x lzma | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += xikestor_sks8300-8x
|
|
|
|
define Device/xikestor_sks8300-12e2t2x
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93000000
|
|
DEVICE_VENDOR := XikeStor
|
|
DEVICE_MODEL := SKS8300-12E2T2X
|
|
IMAGE_SIZE := 20480k
|
|
$(Device/kernel-lzma)
|
|
IMAGE/sysupgrade.bin := \
|
|
pad-extra 16 | \
|
|
append-kernel | \
|
|
pad-to 64k | \
|
|
append-rootfs | \
|
|
pad-rootfs | \
|
|
check-size | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += xikestor_sks8300-12e2t2x
|
|
|
|
define Device/xikestor_sks8310-8x
|
|
SOC := rtl9303
|
|
UIMAGE_MAGIC := 0x93000000
|
|
DEVICE_VENDOR := XikeStor
|
|
DEVICE_MODEL := SKS8310-8X
|
|
DEVICE_PACKAGES := kmod-hwmon-lm75
|
|
IMAGE_SIZE := 20480k
|
|
$(Device/kernel-lzma)
|
|
IMAGE/sysupgrade.bin := \
|
|
pad-extra 16 | \
|
|
append-kernel | \
|
|
pad-to 64k | \
|
|
append-rootfs | \
|
|
pad-rootfs | \
|
|
check-size | \
|
|
append-metadata
|
|
endef
|
|
TARGET_DEVICES += xikestor_sks8310-8x
|
|
|
|
define Device/zyxel_xgs1010-12-a1
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93001010
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := XGS1010-12
|
|
DEVICE_VARIANT := A1
|
|
KERNEL_SIZE := 7168k
|
|
IMAGE_SIZE := 13184k
|
|
$(Device/kernel-lzma)
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1010-12-a1
|
|
|
|
define Device/zyxel_xgs1210-12-a1
|
|
$(Device/zyxel_xgs1210-12)
|
|
SUPPORTED_DEVICES += zyxel,xgs1210-12
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1210-12-a1
|
|
|
|
define Device/zyxel_xgs1210-12-b1
|
|
$(Device/zyxel_xgs1210-12)
|
|
DEVICE_VARIANT := B1
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1210-12-b1
|
|
|
|
define Device/zyxel_xgs1250-12-common
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93001250
|
|
ZYXEL_VERS := ABWE
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := XGS1250-12
|
|
DEVICE_PACKAGES := kmod-hwmon-gpiofan kmod-thermal
|
|
IMAGE_SIZE := 13312k
|
|
KERNEL := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
rt-compress | \
|
|
rt-loader | \
|
|
uImage none
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
rt-compress | \
|
|
zyxel-vers | \
|
|
rt-loader | \
|
|
uImage none
|
|
endef
|
|
|
|
define Device/zyxel_xgs1250-12-a1
|
|
$(Device/zyxel_xgs1250-12-common)
|
|
SUPPORTED_DEVICES += zyxel,xgs1250-12
|
|
DEVICE_VARIANT := A1
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1250-12-a1
|
|
|
|
define Device/zyxel_xgs1250-12-b1
|
|
$(Device/zyxel_xgs1250-12-common)
|
|
DEVICE_VARIANT := B1
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1250-12-b1
|
|
|
|
define Device/zyxel_xmg1915-10e
|
|
SOC := rtl9302
|
|
ZYXEL_VERS := ABWE
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := XMG1915-10E
|
|
FLASH_ADDR := 0xb5290000
|
|
ifeq ($(IB),)
|
|
ARTIFACTS := loader.bin
|
|
ARTIFACT/loader.bin := \
|
|
rt-loader-standalone | \
|
|
zynsig
|
|
endif
|
|
$(Device/rt-loader-bootbase)
|
|
IMAGE_SIZE := 13760k
|
|
endef
|
|
TARGET_DEVICES += zyxel_xmg1915-10e
|