3aef61060e
Extreme Networks AP3935i/e - https://www.extremenetworks.com/support/documentation/access-points-ap3935i-e/ SoC: IPQ8068 QYY AT46279K45060I RAM: NANYA 1527 NT5CC256M16DP-DI 515073W0EF 7 TW FLASH: NOR - S25FL256S1 - 32MB NAND - Macronix MX30UF4G28AB - 512MB LAN: Atheros AR8035-A J5150WL 1515 CN - RGMII LAN2: Atheros AR8033-AL1A SKCSR.AJ1 1444 China - SGMII WLAN2: QCA9990 OVV FNPV209 K451406 WLAN5: QCA9990 OVV FNPV209 K451406 SERIAL: RS232 Port (115200 8n1) Cisco console cable and 4pin Serial Header | 3.3 | GND | RX | TX MAC address for LAN1/LAN2/WLAN 2G/WLAN 5G in uboot env * Installation via either RJ45 console or on-board 4 PIN header Install Method -------------- 1) Setup TFTP server, and place openwrt-ipq806x-generic-extreme_ap3935-initramfs-uImage image in /srv/tftp or similar 2) Connect to console on router and connect ethernet port "LAN1" to your LAN 3) Interupt the boot with any character 4) Login with admin/new2day for default password (use reset/FactoryDefault if password needs to be reset) 5) Set serverip to TFTP IP: set serverip 192.168.1.2 6) Set ipaddr to another IP: set ipaddr 192.168.1.101 7) Make uboot ping something to activate eth0 on boot: set bootcmd 'ping 192.168.1.1; run boot_flash' saveenv 8) TFTP image to RAM: tftpboot 0x42000000 openwrt-ipq806x-generic-extreme_ap3935i-initramfs-uImage 9) Boot image: bootm 0x42000000 In OpenWRT, "LAN1" is LAN, "LAN2" is WAN 10) SFTP openwrt-ipq806x-generic-extreme_ap3935-squashfs-nand-sysupgrade.bin image to /tmp 11) sysupgrade /tmp/openwrt-*-nand-sysupgrade.bin Signed-off-by: Glen Lee <g2lee@yahoo.com>
105 lines
2.3 KiB
Plaintext
105 lines
2.3 KiB
Plaintext
#
|
|
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
|
# Copyright (c) 2011-2015 OpenWrt.org
|
|
#
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
. /lib/functions/system.sh
|
|
|
|
ipq806x_setup_interfaces()
|
|
{
|
|
local board="$1"
|
|
|
|
case "$board" in
|
|
arris,tr4400-v2)
|
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "eth2"
|
|
;;
|
|
askey,rt4230w-rev6 |\
|
|
asrock,g10 |\
|
|
nec,wg2600hp |\
|
|
buffalo,wxr-2533dhp |\
|
|
compex,wpq864 |\
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
qcom,ipq8064-ap148 |\
|
|
linksys,ea7500-v1 |\
|
|
linksys,ea8500 |\
|
|
nec,wg2600hp3 |\
|
|
netgear,r7800 |\
|
|
netgear,xr500 |\
|
|
netgear,xr450 |\
|
|
tplink,c2600 |\
|
|
tplink,vr2600v |\
|
|
tplink,ad7200 |\
|
|
zyxel,nbg6817)
|
|
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
|
;;
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
ucidef_set_interfaces_lan_wan "lan1" "wan"
|
|
;;
|
|
edgecore,ecw5410 |\
|
|
extreme,ap3935)
|
|
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
|
;;
|
|
qcom,ipq8064-ap161)
|
|
ucidef_set_interface_lan "eth1 eth2 lan1 lan2 lan3 lan4" "wan"
|
|
;;
|
|
qcom,ipq8064-db149)
|
|
ucidef_set_interface_lan "eth1 eth2 eth3 lan1 lan2 lan3 lan4" "wan"
|
|
;;
|
|
ubnt,unifi-ac-hd)
|
|
ucidef_set_interface_lan "eth0 eth1"
|
|
;;
|
|
meraki,mr42)
|
|
ucidef_set_interface_lan "eth0"
|
|
;;
|
|
meraki,mr52)
|
|
ucidef_set_interfaces_lan_wan "eth0" "eth1"
|
|
;;
|
|
*)
|
|
echo "Unsupported hardware. Network interfaces not intialized"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
ipq806x_setup_macs()
|
|
{
|
|
local board="$1"
|
|
|
|
case "$board" in
|
|
linksys,ea7500-v1)
|
|
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
|
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
|
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
|
;;
|
|
linksys,ea8500)
|
|
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
|
|
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
|
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
|
;;
|
|
zyxel,nbg6817)
|
|
hw_mac_addr=$(mtd_get_mac_ascii 0:appsblenv ethaddr)
|
|
ucidef_set_interface_macaddr "lan" "$(macaddr_add $hw_mac_addr 2)"
|
|
ucidef_set_interface_macaddr "wan" "$(macaddr_add $hw_mac_addr 3)"
|
|
;;
|
|
asrock,g10)
|
|
hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.LAN.MAC.Address)
|
|
ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
|
|
hw_mac_addr=$(mtd_get_mac_ascii hwconfig HW.WAN.MAC.Address)
|
|
ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
board_config_update
|
|
board=$(board_name)
|
|
|
|
ipq806x_setup_macs $board
|
|
ipq806x_setup_interfaces $board
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|