741ac49396
Add support for Datto L8 with 8 copper ports.
POE+ support with 55W power budget.
Specifications:
---------------
* SoC: Realtek RTL8380M
* Flash: 32MiB Flash
* RAM: 256MiB
* Ethernet: 8x 10/100/1000 Mbps
* PoE: 8x
* Serial: UART 3.3V TTL logic, 115200 8N1
* pinout: G(ND) R(x) T(x) V(cc)
* Buttons: 1x Reset, 1x LED Mode (noop in OpenWrt)
Note: OpenWrt combines the stock dual firmware partitions
for more overlay capacity, however the OpenWrt image cannot
exceed 13504k
Installation:
-------------
> When connected to CloudTrax, the local management login will be disabled to prevent settings conflicts.
Ensure the switch does not have a working internet connection or the local
web management interface is disabled.
Go to the web management page of the switch (may require factory reset).
By default the switch will use DHCP to obtain an IP address.
The default login user is `admin` with password `0p3nm3$h!`
On the left menu, click "Management" and then "Dual Image" and ensure that
"Partition 0" is selected as the active partition. If it is not, select
"Partition 0" and click "Apply" to save changes.
Click on "Upgrade" in the top right of the web interface. Select the
Active boot partition to update. Select the OpenWrt file ending
in `-initramfs-kernel.bin` as the update file to upload.
Upload the file and follow the prompts to upgrade the firmware.
Reboot the switch from the web UI after the firmware update is completed.
Wait for OpenWrt to finish booting (~2 minutes)
Use SSH or the Luci UI (if available) to perform the sysupgrade.
Copy the sysupgrade file ending in `-squashfs-sysupgrade.bin` to the switch:
```
scp -O openwrt-realtek-rtl838x-datto_l8-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/
```
SSH to the switch and run `sysupgrade`:
```
ssh root@192.168.1.1
$ sysupgrade -n /tmp/openwrt-realtek-rtl838x-datto_l8-squashfs-sysupgrade.bin
```
OpenWrt will be installed. Note that first boot after installing requires ~3
minutes for the JFFS2 overlay to be formatted. When the Power LED stops blinking
in the first boot after `sysupgrade`, JFFS2 formatting is completed.
----
Revert back to stock firmware:
You will need a tftp server and the original Datto firmware.
Download the firmware for the S8-L/L8 from Datto:
https://networkinghelp.datto.com/help/Content/kb/Networking/Switches/KB360023113291.html
Rename `s8-l_fw_01.03.24_180823-1639.bix` to `vmlinux.bix`,
put `vmlinux.bix` in the root directory of your tftp server.
Connect a serial console to the UART header and power on the switch.
Interrupt U-Boot by typing `pac` when you see
`Enter correct key to stop autoboot:`
Run the following commands:
```
setenv serverip <tftp_server_ip>
setenv ipaddr <ip_on_same_subnet>
setenv netmask 255.255.255.0
run rtkon
run update_linux
run update_linux2
reset
```
The switch will boot the Datto firmware.
Signed-off-by: Hal Martin <hal.martin@gmail.com>
Tested-By: Raylynn Knight <rayknight@me.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
485 lines
11 KiB
Makefile
485 lines
11 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
include ./common.mk
|
|
|
|
define Device/allnet_all-sg8208m
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 7168k
|
|
DEVICE_VENDOR := ALLNET
|
|
DEVICE_MODEL := ALL-SG8208M
|
|
UIMAGE_MAGIC := 0x00000006
|
|
UIMAGE_NAME := 2.2.2.0
|
|
endef
|
|
TARGET_DEVICES += allnet_all-sg8208m
|
|
|
|
define Device/apresia_aplgs120gtss
|
|
$(Device/cameo-fw)
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 14848k
|
|
DEVICE_VENDOR := APRESIA
|
|
DEVICE_MODEL := ApresiaLightGS120GT-SS
|
|
UIMAGE_MAGIC := 0x12345000
|
|
CAMEO_KERNEL_PART_SIZE := 1572864
|
|
CAMEO_KERNEL_PART := 3
|
|
CAMEO_ROOTFS_PART := 4
|
|
CAMEO_CUSTOMER_SIGNATURE := 2
|
|
CAMEO_BOARD_MODEL := APLGS120GTSS
|
|
CAMEO_BOARD_VERSION := 4
|
|
endef
|
|
TARGET_DEVICES += apresia_aplgs120gtss
|
|
|
|
define Device/d-link_dgs-1210-10mp-f
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := DGS-1210-10MP
|
|
DEVICE_VARIANT := F
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-10mp-f
|
|
|
|
define Device/d-link_dgs-1210-10p
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-10P
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-10p
|
|
|
|
define Device/d-link_dgs-1210-16
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-16
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-16
|
|
|
|
define Device/d-link_dgs-1210-20
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-20
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-20
|
|
|
|
define Device/d-link_dgs-1210-26
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-26
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-26
|
|
|
|
define Device/d-link_dgs-1210-28
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-28
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-28
|
|
|
|
define Device/d-link_dgs-1210-28mp-f
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-28MP
|
|
DEVICE_VARIANT := F
|
|
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-28mp-f
|
|
|
|
define Device/d-link_dgs-1210-28p-f
|
|
$(Device/d-link_dgs-1210)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := DGS-1210-28P
|
|
DEVICE_VARIANT := F
|
|
DEVICE_PACKAGES += realtek-poe kmod-hwmon-lm63
|
|
endef
|
|
TARGET_DEVICES += d-link_dgs-1210-28p-f
|
|
|
|
define Device/datto_l8
|
|
$(Device/uimage-rt-loader)
|
|
SOC := rtl8380
|
|
DEVICE_VENDOR := Datto
|
|
DEVICE_MODEL := L8
|
|
DEVICE_ALT0_VENDOR := Open Mesh
|
|
DEVICE_ALT0_MODEL := S8-L
|
|
DEVICE_PACKAGES += realtek-poe
|
|
UIMAGE_MAGIC := 0x00703400
|
|
IMAGE_SIZE := 13504k
|
|
endef
|
|
TARGET_DEVICES += datto_l8
|
|
|
|
define Device/engenius_ews2910p-v1
|
|
$(Device/engenius_ews2910p)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := EWS2910P
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES += realtek-poe
|
|
UIMAGE_MAGIC := 0x03802910
|
|
SUPPORTED_DEVICES += engenius,ews2910p
|
|
endef
|
|
TARGET_DEVICES += engenius_ews2910p-v1
|
|
|
|
define Device/engenius_ews2910p-v3
|
|
$(Device/engenius_ews2910p)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := EWS2910P
|
|
DEVICE_VARIANT := v3
|
|
UIMAGE_MAGIC := 0x03010500
|
|
endef
|
|
TARGET_DEVICES += engenius_ews2910p-v3
|
|
|
|
define Device/hpe_1920-8g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := 1920-8G (JG920A)
|
|
H3C_DEVICE_ID := 0x00010023
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-8g
|
|
|
|
define Device/hpe_1920-8g-poe-65w
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := 1920-8G-PoE+ 65W (JG921A)
|
|
DEVICE_PACKAGES += realtek-poe
|
|
H3C_DEVICE_ID := 0x00010024
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-8g-poe-65w
|
|
|
|
define Device/hpe_1920-8g-poe-180w
|
|
$(Device/hpe_1920)
|
|
$(Device/hwmon-fan-migration)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := 1920-8G-PoE+ 180W (JG922A)
|
|
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
|
|
H3C_DEVICE_ID := 0x00010025
|
|
SUPPORTED_DEVICES += hpe,1920-8g-poe
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-8g-poe-180w
|
|
|
|
define Device/hpe_1920-16g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-16G (JG923A)
|
|
H3C_DEVICE_ID := 0x00010026
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-16g
|
|
|
|
define Device/hpe_1920-24g
|
|
$(Device/hpe_1920)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-24G (JG924A)
|
|
H3C_DEVICE_ID := 0x00010027
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-24g
|
|
|
|
define Device/hpe_1920-24g-poe-180w
|
|
$(Device/hpe_1920)
|
|
$(Device/hwmon-fan-migration)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-24G-PoE+ 180W (JG925A)
|
|
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
|
|
H3C_DEVICE_ID := 0x00010028
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-24g-poe-180w
|
|
|
|
define Device/hpe_1920-24g-poe-370w
|
|
$(Device/hpe_1920)
|
|
$(Device/hwmon-fan-migration)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := 1920-24G-PoE+ 370W (JG926A)
|
|
DEVICE_PACKAGES += realtek-poe kmod-hwmon-gpiofan
|
|
H3C_DEVICE_ID := 0x00010029
|
|
endef
|
|
TARGET_DEVICES += hpe_1920-24g-poe-370w
|
|
|
|
define Device/inaba_aml2-17gp
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 13504k
|
|
DEVICE_VENDOR := INABA
|
|
DEVICE_MODEL := Abaniact AML2-17GP
|
|
UIMAGE_MAGIC := 0x83800000
|
|
endef
|
|
TARGET_DEVICES += inaba_aml2-17gp
|
|
|
|
define Device/iodata_bsh-g24mb
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 13696k
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := BSH-G24MB
|
|
UIMAGE_MAGIC := 0x83800013
|
|
endef
|
|
TARGET_DEVICES += iodata_bsh-g24mb
|
|
|
|
define Device/linksys_lgs310c
|
|
$(Device/uimage-rt-loader)
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 13504k
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := LGS310C
|
|
BELKIN_MODEL := BKS-RTL83xx
|
|
BELKIN_HEADER := 0x07800001
|
|
LINKSYS_MODEL := 60402060
|
|
IMAGES += factory.imag
|
|
IMAGE/factory.imag := \
|
|
append-kernel | \
|
|
pad-to 64k | \
|
|
append-rootfs | \
|
|
pad-rootfs | \
|
|
check-size | \
|
|
append-metadata | \
|
|
linksys-image | \
|
|
belkin-header
|
|
endef
|
|
TARGET_DEVICES += linksys_lgs310c
|
|
|
|
# "NGE" refers to the uImage magic
|
|
define Device/netgear_nge
|
|
$(Device/uimage-rt-loader)
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 14848k
|
|
UIMAGE_MAGIC := 0x4e474520
|
|
UIMAGE_NAME := 9.9.9.9
|
|
DEVICE_VENDOR := NETGEAR
|
|
endef
|
|
|
|
# "NGG" refers to the uImage magic
|
|
define Device/netgear_ngg
|
|
KERNEL := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
lzma | \
|
|
uImage lzma
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
lzma | \
|
|
uImage lzma
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 14848k
|
|
UIMAGE_MAGIC := 0x4e474720
|
|
DEVICE_VENDOR := NETGEAR
|
|
endef
|
|
|
|
define Device/netgear_gs108t-v3
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS108T
|
|
DEVICE_VARIANT := v3
|
|
endef
|
|
TARGET_DEVICES += netgear_gs108t-v3
|
|
|
|
define Device/netgear_gs110tpp-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS110TPP
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += netgear_gs110tpp-v1
|
|
|
|
define Device/netgear_gs110tup-v1
|
|
$(Device/netgear_ngg)
|
|
DEVICE_MODEL := GS110TUP
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += netgear_gs110tup-v1
|
|
|
|
define Device/netgear_gs308t-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS308T
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x4e474335
|
|
endef
|
|
TARGET_DEVICES += netgear_gs308t-v1
|
|
|
|
define Device/netgear_gs310tp-v1
|
|
$(Device/netgear_nge)
|
|
DEVICE_MODEL := GS310TP
|
|
DEVICE_VARIANT := v1
|
|
UIMAGE_MAGIC := 0x4e474335
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += netgear_gs310tp-v1
|
|
|
|
define Device/panasonic_m16eg-pn28160k
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M16eG
|
|
DEVICE_VARIANT := PN28160K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m16eg-pn28160k
|
|
|
|
define Device/panasonic_m24eg-pn28240k
|
|
SOC := rtl8382
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M24eG
|
|
DEVICE_VARIANT := PN28240K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m24eg-pn28240k
|
|
|
|
define Device/panasonic_m8eg-pn28080k
|
|
SOC := rtl8380
|
|
IMAGE_SIZE := 16384k
|
|
DEVICE_VENDOR := Panasonic
|
|
DEVICE_MODEL := Switch-M8eG
|
|
DEVICE_VARIANT := PN28080K
|
|
DEVICE_PACKAGES := kmod-i2c-mux-pca954x
|
|
endef
|
|
TARGET_DEVICES += panasonic_m8eg-pn28080k
|
|
|
|
define Device/tplink_sg2008p-v1
|
|
SOC := rtl8380
|
|
KERNEL_SIZE := 6m
|
|
IMAGE_SIZE := 26m
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := SG2008P
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-hwmon-tps23861
|
|
endef
|
|
TARGET_DEVICES += tplink_sg2008p-v1
|
|
|
|
define Device/tplink_sg2210p-v3
|
|
SOC := rtl8380
|
|
KERNEL_SIZE := 6m
|
|
IMAGE_SIZE := 26m
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := SG2210P
|
|
DEVICE_VARIANT := v3
|
|
DEVICE_PACKAGES := kmod-hwmon-tps23861
|
|
endef
|
|
TARGET_DEVICES += tplink_sg2210p-v3
|
|
|
|
define Device/tplink_t1600g-28ts-v3
|
|
SOC := rtl8382
|
|
KERNEL_SIZE := 6m
|
|
IMAGE_SIZE := 26m
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := T1600G-28TS
|
|
DEVICE_VARIANT := v3
|
|
endef
|
|
TARGET_DEVICES += tplink_t1600g-28ts-v3
|
|
|
|
define Device/zyxel_gs1900-10hp-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-10HP
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAZI
|
|
DEVICE_PACKAGES += realtek-poe
|
|
SUPPORTED_DEVICES += zyxel,gs1900-10hp
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-10hp-a1
|
|
|
|
define Device/zyxel_gs1900-16-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-16
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHJ
|
|
SUPPORTED_DEVICES += zyxel,gs1900-16
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-16-a1
|
|
|
|
define Device/zyxel_gs1900-8-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHH
|
|
SUPPORTED_DEVICES += zyxel,gs1900-8 zyxel,gs1900-8-v1
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8-a1
|
|
|
|
define Device/zyxel_gs1900-8-b1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8
|
|
DEVICE_VARIANT := B1
|
|
ZYXEL_VERS := AAHH
|
|
SUPPORTED_DEVICES += zyxel,gs1900-8 zyxel,gs1900-8-v2
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8-b1
|
|
|
|
define Device/zyxel_gs1900-8hp-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8HP
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHI
|
|
SUPPORTED_DEVICES += zyxel,gs1900-8hp-v1
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8hp-a1
|
|
|
|
define Device/zyxel_gs1900-8hp-b1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8380
|
|
DEVICE_MODEL := GS1900-8HP
|
|
DEVICE_VARIANT := B1
|
|
ZYXEL_VERS := AAHI
|
|
SUPPORTED_DEVICES += zyxel,gs1900-8hp-v2
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-8hp-b1
|
|
|
|
define Device/zyxel_gs1900-24-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHL
|
|
SUPPORTED_DEVICES += zyxel,gs1900-24-v1
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24-a1
|
|
|
|
define Device/zyxel_gs1900-24-b1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24
|
|
DEVICE_VARIANT := B1
|
|
ZYXEL_VERS := AAHL
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24-b1
|
|
|
|
define Device/zyxel_gs1900-24e-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24E
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHK
|
|
SUPPORTED_DEVICES += zyxel,gs1900-24e
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24e-a1
|
|
|
|
define Device/zyxel_gs1900-24ep-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24EP
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := ABTO
|
|
SUPPORTED_DEVICES += zyxel,gs1900-24ep
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24ep-a1
|
|
|
|
define Device/zyxel_gs1900-24hp-a1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24HP
|
|
DEVICE_VARIANT := A1
|
|
ZYXEL_VERS := AAHM
|
|
SUPPORTED_DEVICES += zyxel,gs1900-24hp-v1
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24hp-a1
|
|
|
|
define Device/zyxel_gs1900-24hp-b1
|
|
$(Device/zyxel_gs1900)
|
|
SOC := rtl8382
|
|
DEVICE_MODEL := GS1900-24HP
|
|
DEVICE_VARIANT := B1
|
|
ZYXEL_VERS := ABTP
|
|
SUPPORTED_DEVICES += zyxel,gs1900-24hp-v2
|
|
DEVICE_PACKAGES += realtek-poe
|
|
endef
|
|
TARGET_DEVICES += zyxel_gs1900-24hp-b1
|