ed7d62caf2
This commit adds support for Hasivo S1100W-8XGT-SE switch.
Device specification
--------------------
SoC Type: RTL9303
RAM: Samsung K4B461646E-BYKO (512MB)
Flash: Fudan FM25Q128A (16 MB)
Ethernet: 8x 10G via 2x RTL8264 PHY
LEDs: 2 LEDs, 1 power green, 1 system green
Button: Reset
USB ports: None
Bootloader: Realtek U-Boot - U-Boot 2011.12.(3.6.6.55087) (Nov 13 2022 - 14:37:31)
Fan: 2 fans controlled by STC8G1K08 TSOP-20 microcontroller
Note: The fan appears to operate the same irrespective of the running
firmware. The STC9G1K08 is likely operating independently.
To explore the stock vendor firmware, there are 2 avenues to gain root
access. This is not necessary to install OpenWrt, but is here for
reference.
Root access via serial
----------------------
1. ctrl+t
2. password: switchrtk
3. press 's' for shell
Root access via SSH
-------------------
1. ctrl+t
2. password: switchrtk
3. sys command sh
4. log in with your username+password
5. ctrl+t
6. password: switchrtk
7. press 's' for shell
Credit to https://forum.openwrt.org/t/hasivo-switches/151758/174 for rooting instructions.
Installing OpenWrt
------------------
1. Connect to UART. UART requires soldering an RJ45 connector to the
console footprint on the board. The header is on the top right of
this image: 4d2ab97fad.jpeg
2. Set computer IP to 192.168.0.111.
3. Enter bootloader by pressing esc key during boot.
4. Enter password 'Hs2021cfgmg'.
5. Type 'XXXX'.
6. setenv bootcmd 'rtk network on; bootm 0xb4300000'
7. saveenv
8. rtk network on
9. tftpboot 0x84f00000 <openwrt-initramfs>
10. bootm 0x84f00000
Now you can copy over the sysupgrade image and install.
Credit to
https://forum.openwrt.org/t/hasivo-switches/151758/22?u=andrewjlamarche
for u-boot console access instructions.
Signed-off-by: Andrew LaMarche <andrewjlamarche@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17137
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
79 lines
1.8 KiB
Makefile
79 lines
1.8 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
define Build/xikestor-nosimg
|
|
$(STAGING_DIR_HOST)/bin/nosimg-enc -i $@ -o $@.new
|
|
mv $@.new $@
|
|
endef
|
|
|
|
define Device/hasivo_s1100w-8xgt-se
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := Hasivo
|
|
DEVICE_MODEL := S1100W-8XGT-SE
|
|
IMAGE_SIZE := 12288k
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
lzma | \
|
|
uImage lzma
|
|
endef
|
|
TARGET_DEVICES += hasivo_s1100w-8xgt-se
|
|
|
|
define Device/tplink_tl-st1008f_v2
|
|
SOC := rtl9303
|
|
UIMAGE_MAGIC := 0x93030000
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := TL-ST1008F
|
|
DEVICE_VARIANT := v2.0
|
|
DEVICE_PACKAGES := kmod-gpio-pca953x
|
|
IMAGE_SIZE := 31808k
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-st1008f_v2
|
|
|
|
define Device/xikestor_sks8300-8x
|
|
SOC := rtl9303
|
|
DEVICE_VENDOR := XikeStor
|
|
DEVICE_MODEL := SKS8300-8X
|
|
DEVICE_ALT0_VENDOR := ONTi
|
|
DEVICE_ALT0_MODEL := ONT-S508CL-8S
|
|
BLOCKSIZE := 64k
|
|
KERNEL_SIZE := 8192k
|
|
IMAGE_SIZE := 30720k
|
|
IMAGE/sysupgrade.bin := pad-extra 256 | append-kernel | xikestor-nosimg | \
|
|
jffs2 nos.img -e 4KiB -x lzma | pad-to $$$$(KERNEL_SIZE) | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size
|
|
endef
|
|
TARGET_DEVICES += xikestor_sks8300-8x
|
|
|
|
define Device/zyxel_xgs1210-12
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93001210
|
|
ZYXEL_VERS := ABTY
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := XGS1210-12
|
|
IMAGE_SIZE := 13312k
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
gzip | \
|
|
zyxel-vers | \
|
|
uImage gzip
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1210-12
|
|
|
|
define Device/zyxel_xgs1250-12
|
|
SOC := rtl9302
|
|
UIMAGE_MAGIC := 0x93001250
|
|
ZYXEL_VERS := ABWE
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := XGS1250-12
|
|
DEVICE_PACKAGES := kmod-hwmon-gpiofan kmod-thermal
|
|
IMAGE_SIZE := 13312k
|
|
KERNEL_INITRAMFS := \
|
|
kernel-bin | \
|
|
append-dtb | \
|
|
gzip | \
|
|
zyxel-vers | \
|
|
uImage gzip
|
|
endef
|
|
TARGET_DEVICES += zyxel_xgs1250-12
|