openwrt/target/linux/mediatek/filogic/base-files/etc/board.d
Sebastian Schaper 907cb88e10 mediatek: filogic: add support for WAVLINK WL-WN573HX3
The WL-WN573HX3 is an AX3000 outdoor Access Point by WAVLINK,
also sold in Europe as 7Links WLR-1300 (ZX-5612).

Specifications:

- MT7981B + MT7976 AX3000 2x2 DBDC (160 MHz)
- 16 MiB SPI NOR, 256 MiB RAM
- Gigabit ethernet port, 802.3af PoE
- IP67 outdoor case for wall or pole mounting with
    four single band RP-SMA fiberglass antennas (8 dBi)

Installation:

- OEM Web UI is at 192.168.30.1 which will forward to
    http://netlogin.link (using a captive portal)
- login with default password `admin`
- skip setup wizard by navigating directly to
    http://netlogin.link/html/meshUpgrade.html
- upload WN573HX3-sysupgrade.bin
- reset to factory defaults to discard OEM UCI settings

MAC address assignment:

LAN         80:xx:xx:76:xx:25  hw 0x44e
WLAN 2.4G   80:xx:xx:76:xx:27  factory 0x04 (label MAC)
WLAN 5G	    82:xx:xx:46:xx:27
pair key    8a:xx:xx:76:xx:27  also on label, not used by OpenWrt

Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
2025-04-18 14:00:39 +02:00
..
01_leds mediatek: filogic: add support for WAVLINK WL-WN573HX3 2025-04-18 14:00:39 +02:00
02_network mediatek: filogic: add support for WAVLINK WL-WN573HX3 2025-04-18 14:00:39 +02:00
03_gpio_switches mediatek: filogic: Fix GPIOs for Zbtlink ZBT-Z8102AX 2023-11-25 22:25:42 +01:00
04_defaults mediatek: set 7 MACs per wifi band in board.json on OpenWrt One 2024-11-05 10:11:44 +01:00
05_compat-version mediatek: filogic: bpi-r4: set netdev-name for sfp ports 2024-12-20 18:19:10 +01:00