Update README.md

This commit is contained in:
MooCat 2026-06-13 12:37:12 -04:00 committed by GitHub
parent 82332cdc0c
commit 1ea3d0cd13
Signed by: mooleshacat
GPG Key ID: B5690EEEBB952194

View File

@ -34,16 +34,15 @@ I am doing so for a few reasons:
## ORIGINAL SOURCE - UP TO DATE GOLD SHEET: ## ORIGINAL SOURCE - UP TO DATE GOLD SHEET:
``` ```
############################ ######################
## GOLD SHEET BELOW ## ## GOLD SHEET ##
############################ ######################
#################### ####################
## ToH Spec Sheet ## ## ToH Spec Sheet ##
#################### ####################
AC3000 Tri-Band Wireless Gigabit Dual-WAN VPN SMB Router AC3000 Tri-Band Wireless Gigabit Dual-WAN VPN SMB Router
NOTICE: This is a TRENDnet router, which uses OpenWRT 15.05 as a base for it's firmware! NOTICE: This is a TRENDnet router, which uses OpenWRT 15.05 as a base for it's firmware!
@ -98,8 +97,6 @@ OpenVPN performance: ?
Wireguard performance: ? Wireguard performance: ?
############################### ###############################
## Additional Specifications ## ## Additional Specifications ##
############################### ###############################
@ -138,15 +135,13 @@ DTSI File: qcom-ipq4019-ap.dk04.1.dtsi
- Ideally we would preserve the redundant bootloader/rootfs functionality - Ideally we would preserve the redundant bootloader/rootfs functionality
################ ################
## KNOWN UART ## ## KNOWN UART ##
################ ################
UART HEADER: is a 4 pin header in the back of the router behind the metal heatsink UART HEADER: is a 4 pin header in the back of the router behind the metal heatsink
PIN 1: Is marked by silkscreened hollow triangle PIN 1: Is marked by a white silkscreened hollow triangle
Pin 1: If facing router, with ports & lights in front of you, pin 1 is on the left. Pin 1: If facing router, with ports & lights in front of you, pin 1 is on the left.
Pin FUNCTION Pin FUNCTION
@ -171,8 +166,6 @@ GPIO FUNCTION
48 usb-power-enable -> drive HIGH to enable USB power (finally found it via probing!) 48 usb-power-enable -> drive HIGH to enable USB power (finally found it via probing!)
############# #############
## VERSION ## ## VERSION ##
############# #############
@ -188,8 +181,6 @@ HUSH_VERSION=0.01
(IPQ40xx) # (IPQ40xx) #
############## ##############
## SF PROBE ## ## SF PROBE ##
############## ##############
@ -199,8 +190,6 @@ SF: Detected MX25L6405D with page size 4 KiB, total 8 MiB
(IPQ40xx) # (IPQ40xx) #
############## ##############
## PRINTENV ## ## PRINTENV ##
############## ##############
@ -227,8 +216,6 @@ Environment size: 287/65532 bytes
(IPQ40xx) # (IPQ40xx) #
############# #############
## MMCINFO ## ## MMCINFO ##
############# #############
@ -247,8 +234,6 @@ Bus Width: 1-bit
(IPQ40xx) # (IPQ40xx) #
############## ##############
## MII INFO ## ## MII INFO ##
############## ##############
@ -278,8 +263,6 @@ PHY 0x18: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
(IPQ40xx) # (IPQ40xx) #
############# #############
## PCI ## ## PCI ##
############# #############
@ -323,8 +306,6 @@ _____________________________________________________________
(IPQ40xx) # (IPQ40xx) #
############## ##############
## SMEMINFO ## ## SMEMINFO ##
############## ##############
@ -351,8 +332,6 @@ No.: Name Attributes Start Size
(IPQ40xx) # (IPQ40xx) #
##################################### #####################################
## MACRONIX MX25L6433F SPI NOR 8MB ## ## MACRONIX MX25L6433F SPI NOR 8MB ##
## BOOTLOADER PARTITION TABLE DUMP ## ## BOOTLOADER PARTITION TABLE DUMP ##
@ -508,11 +487,9 @@ filename = openwrt-ipq806x-ipq40xx-ubi-root.img
root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2# root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2#
###################################### ######################################
## Micron MT29F1G08ABADA NAND 128MB ## ## Micron MT29F1G08ABADA NAND 128MB ##
## BOOTLOADER PARTITION TABLE DUMP ## ## PARTITION TABLE DUMP ##
###################################### ######################################
group_pairs Layout blocks found at PEBs: [[0, 1], [384, 385], [801, 921]] group_pairs Layout blocks found at PEBs: [[0, 1], [384, 385], [801, 921]]
@ -526,8 +503,6 @@ description Create Volume: b'rootfs_data', ID: 0, Block Cnt: 39
description Created Image: 864603106, Volume Cnt: 1 description Created Image: 864603106, Volume Cnt: 1
################### ###################
## DMESG on BOOT ## ## DMESG on BOOT ##
################### ###################