catspeed-cc/tew-829dru-goldrepo
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Update README.md

Browse Source 
updated wifi identifiers
This commit is contained in:
MooCat 2026-06-14 19:05:57 -04:00 committed by GitHub
parent 3f22c77def
commit 76aa7426c4
Signed by: mooleshacat
GPG Key ID: B5690EEEBB952194
1 changed files with 111 additions and 43 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

106
README.md
View File

@ -102,7 +102,6 @@ Wireguard performance: ?
###############################
FCC ID: XU8TEW829DRU
Board Manufacturer: U-MEDIA
DevKit: Qualcomm IPQ40xx/AP-DK04.1-C1 (corrected)
@ -112,6 +111,11 @@ DTS Closest Sibling: qcom-ipq4019-ap.dk04.1-c1.dts (corrected)
DTSI File: qcom-ipq4019-ap.dk04.1.dtsi
Inherits: qcom-ipq4019.dtsi
QCA9984 firmware identifier: bus=pci,bmi-chip-id=0,bmi-board-id=1
QCA4019 firmware identifier: bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=TEW-829DRU-2G
bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=TEW-829DRU-5G
###########
## NOTES ##
@ -164,9 +168,9 @@ Note: GPIO's on this device are offset by +512 - logical GPIO1 is actually GPIO5
Note: Working on obtaining LED & switch/phy reset GPIO's
Note: TRENDnet does not provide GPIO mappings - failing to comply w/ GPL & provide proper CCS
GPIO FUNCTION
LOGICAL GPIO ACTUAL GPIO FUNCTION
48 usb-power-enable -> drive HIGH to enable USB power (finally found it via probing!)
48 560 usb-power-enable -> drive HIGH to enable USB power (finally found it via probing!)
#############
@ -407,6 +411,22 @@ DECIMAL HEXADECIMAL DESCRIPTION
root@AIKS0:~/work/flash-dump#
######################################
## Micron MT29F1G08ABADA NAND 128MB ##
## PARTITION TABLE DUMP ##
######################################
group_pairs Layout blocks found at PEBs: [[0, 1], [384, 385], [801, 921]]
description Create Volume: b'kernel', ID: 0, Block Cnt: 29
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 1119963279, Volume Cnt: 2
description Create Volume: b'kernel', ID: 0, Block Cnt: 30
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 490764789, Volume Cnt: 2
description Create Volume: b'rootfs_data', ID: 0, Block Cnt: 39
description Created Image: 864603106, Volume Cnt: 1
# FROM GPL SOURCE:
root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2# cat common/build/ipq/nand-flash.conf
@ -490,22 +510,6 @@ filename = openwrt-ipq806x-ipq40xx-ubi-root.img
root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2#
######################################
## Micron MT29F1G08ABADA NAND 128MB ##
## PARTITION TABLE DUMP ##
######################################
group_pairs Layout blocks found at PEBs: [[0, 1], [384, 385], [801, 921]]
description Create Volume: b'kernel', ID: 0, Block Cnt: 29
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 1119963279, Volume Cnt: 2
description Create Volume: b'kernel', ID: 0, Block Cnt: 30
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 490764789, Volume Cnt: 2
description Create Volume: b'rootfs_data', ID: 0, Block Cnt: 39
description Created Image: 864603106, Volume Cnt: 1
###################
## DMESG on BOOT ##
###################
@ -652,4 +656,68 @@ eth2 MAC Address from ART: 3c:8c:f8:f3:96:b3
Using machid 0x8010006 from environment
Starting kernel ...
#####################
## CALDATA PACKING ##
#####################
These are the board-2.json files I used (named differently)
This is only required for developers porting devices, the average user will not have to do any of this process.
This is mainly documentation for myself.
What is important here is the overall structure, and the `names` field. Copy it exactly.
The filenames are irrelevant. Yours may be different. Just rename or replace them.
qca4019-artcaldata.json
###
[
{
"names": ["bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=TEW-829DRU-2G"],
"data": "cal-ahb-0-fresh.bin"
},
{
"names": ["bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=TEW-829DRU-5G"],
"data": "cal-ahb-1-fresh.bin"
}
]
###
qca9984-artcaldata.json
###
[
{
"names": [
"bus=pci,bmi-chip-id=0,bmi-board-id=1"
],
"data": "cal-pci-fresh.bin"
}
]
###
The commands to run to build the bin file:
###
# CREATE BOARD-2.BIN (QCA9984)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca9984-artcaldata.json -o qca9984-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca9984-boardData.json -o qca9984-boardData.bin
# EXTRACT BOARD-2.BIN - INSIDE tmp/ (QCA9984)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../../qca9984-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../../qca9984-boardData.bin
# CREATE BOARD-2.BINS (QCA4019)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca4019-artcaldata.json -o qca4019-artcaldata.bin
tools/qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca4019-boardData.json -o qca4019-boardData.bin
# EXTRACT BOARD-2.BIN - INSIDE tmp/ (QCA4019)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../qca4019-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../qca4019-boardData.bin
###
You can make a tmp/ directory, enter it, and run the extraction command in order to extract it back into a board-2.json and the original bin file(s)
Should the JSON look correct (has both entries if there are two) and there are all bin files present (with different names is ok) then you completed a "round trip".
The files are ready for insertion into your dev environment and built into the image.
```