catspeed-cc/tew-829dru-goldrepo
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
ab46ecdd56
tew-829dru-goldrepo/trendnet-tew-829dru-goldsheet.txt
mooleshacat 7db419dd61
sync with remote
2026-06-19 17:28:04 -04:00

689 lines
25 KiB
Plaintext
Raw Blame History

######################
## GOLD SHEET ##
######################
####################
## ToH Spec Sheet ##
####################
AC3000 Tri-Band Wireless Gigabit Dual-WAN VPN SMB Router
NOTICE: This is a TRENDnet router, which uses OpenWRT 15.05 as a base for it's firmware!
Brand: TRENDnet
Model: TEW-829DRU
Version: v1.0R
Availability: Discontinued 2021 / EOL 2026-05-28
Gluon support: unknown
Target: ipq40xx
Subtarget: generic
Package architecture: arm_cortex-a7_neon-vfpv4
Bootloader: U-Boot
CPU: Qualcomm Atheros IPQ4019 SoC
CPU Cores: 4
CPU MHz: 717
Flash MB: 8, 128 (Macronix MX25L6433F SPI NOR / Micron MT29F1G08ABADA NAND)
NANDRAM MB: 256 (Winbond W632GU6MB-12)
Ethernet 100M ports: -
Ethernet 1Gbit ports: 10
Ethernet 2.5Gbit ports: -
Ethernet 5Gbit ports: -
Ethernet 10Gbit ports: -
SFP ports: -
SFP+ ports: -
Switch: Qualcomm Atheros QCA8075, Qualcomm Atheros QCA8337
VLAN: Yes
Modem: -
Comments network ports: 2 WAN + 8 LAN Port Switch
WLAN Hardware: Qualcomm Atheros QCA4019, Qualcomm Atheros QCA9984
WLAN 2.4GHz: b/g/n
WLAN 5.0GHz: a/n/ac
WLAN driver: ath10k
Detachable Antennas: 6
Bluetooth: -
miniPCI ports: -
USB ports: 1x 3.0
SATA ports: -
Video ports: -
Audio ports: -
Phone ports: -
Serial: Yes
Serial connection parameters: 115200 / 8N1
Serial connection voltage: ?
JTAG: ?
LED count: 5
Button count: -
GPIOs: -
Power Supply: 12 VDC, 3.0A via barrel
Outdoor: No
OpenVPN performance: ?
Wireguard performance: ?
###############################
## Additional Specifications ##
###############################
FCC ID: XU8TEW829DRU
Board Manufacturer: U-MEDIA
DevKit: Qualcomm IPQ40xx/AP-DK04.1-C1 (corrected)
DTS Closest Sibling: qcom-ipq4019-ap.dk04.1-c1.dts (corrected)
DTSI File: qcom-ipq4019-ap.dk04.1.dtsi
Inherits: qcom-ipq4019.dtsi
QCA9984 firmware identifier: bus=pci,bmi-chip-id=0,bmi-board-id=1
QCA4019 firmware identifier: bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=TEW-829DRU-2G
bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=TEW-829DRU-5G
###########
## NOTES ##
###########
- This is a quad core, 717 Mhz, 256MB RAM IPQ4019 device
- This device is based off the Qualcomm ap.dk04.1-c1 SDK development board
- This is a Dual Switch / Dual MAC Architecture device (QCA8337/QCA8075)
- This device has a redundant setup with two flash chips:
- Macronix MX25L6433F SPI NOR - for the single bootloader setup
- Micron MT29F1G08ABADA NAND) - for the redundant/dual root filesystem
- This device is a tri-band wireless device (QC4019, QCA9984)
- This device firmware is based off OpenWRT 15.05 Chaos Calmer (licensed under GPLv2)
- This device has a single bootloader setup
- This device has a redundant/dual kernel/rootfs setup
- This device has a rootfs_data overlay
- Ideally we would preserve the redundant rootfs functionality
################
## KNOWN UART ##
################
UART HEADER: is a 4 pin header in the back of the router behind the metal heatsink
PIN 1: Is marked by a white silkscreened hollow triangle
Pin 1: If facing router, with ports & lights in front of you, pin 1 is on the left.
Pin FUNCTION
1 VCC (3.3v constant)
2 GND (continuity to DC negative)
3 TX (3.3v high, fluctuating during transmission while device is powered, dead when device is unpowered)
4 RX (3.3v high, fluctuating during transmission, most likely dead unless UART device is connected)
Note: this has been verified with a multimeter, it is the most common used pinout layout
#################
## KNOWN GPIOS ##
#################
Note: GPIO's on this device are offset by +512 - logical GPIO1 is actually GPIO513
Note: Working on obtaining LED & switch/phy reset GPIO's
Note: TRENDnet does not provide GPIO mappings - failing to comply w/ GPL & provide proper CCS
LOGICAL GPIO ACTUAL GPIO FUNCTION
48 560 usb-power-enable -> drive HIGH to enable USB power (finally found it via probing!)
52 564 mdio (determined following hardware lineage)
53 565 mdc (determined following hardware lineage)
#############
## VERSION ##
#############
(IPQ40xx) # version
U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Jan 23 2018 - 20:04:52)
arm-openwrt-linux-uclibcgnueabi-gcc (OpenWrt/Linaro GCC 4.8-2014.04 r35193) 4.8.3
GNU ld (GNU Binutils) 2.24.0
(IPQ40xx) #
(IPQ40xx) # showvar
HUSH_VERSION=0.01
(IPQ40xx) #
##############
## SF PROBE ##
##############
(IPQ40xx) # sf probe
SF: Detected MX25L6405D with page size 4 KiB, total 8 MiB
(IPQ40xx) #
##############
## PRINTENV ##
##############
(IPQ40xx) # printenv
baudrate=115200
boot_partition=1
bootcmd=bootipq
bootdelay=7
ethact=eth0
flash_type=0
ipaddr=192.168.10.11
machid=8010006
nand_erasesize=1000
nand_oobsize=0
nand_writesize=100
serverip=192.168.10.100
stderr=serial
stdin=serial
stdout=serial
wait_boot=60
Environment size: 287/65532 bytes
(IPQ40xx) #
#############
## MMCINFO ##
#############
(IPQ40xx) # mmcinfo
Card did not respond to voltage select!
Device: qca_mmc
Manufacturer ID: 0
OEM: 0
Name: Tran Speed: 0
Rd Block Len: 0
MMC version 0.0
High Capacity: No
Capacity: 0 Bytes
Bus Width: 1-bit
(IPQ40xx) #
##############
## MII INFO ##
##############
(IPQ40xx) # mii info
PHY 0x00: OUI = 0x1374, Model = 0x03, Rev = 0x06, 10baseT, HDX
PHY 0x01: OUI = 0x1374, Model = 0x03, Rev = 0x06, 10baseT, HDX
PHY 0x02: OUI = 0x1374, Model = 0x03, Rev = 0x06, 10baseT, HDX
PHY 0x03: OUI = 0x1374, Model = 0x03, Rev = 0x06, 10baseT, HDX
PHY 0x04: OUI = 0x1374, Model = 0x03, Rev = 0x06, 10baseT, HDX
PHY 0x06: OUI = 0x1374, Model = 0x07, Rev = 0x02, 10baseT, HDX
PHY 0x08: OUI = 0x1374, Model = 0x0B, Rev = 0x01, 10baseT, HDX
PHY 0x09: OUI = 0x1374, Model = 0x0B, Rev = 0x01, 10baseT, HDX
PHY 0x0A: OUI = 0x1374, Model = 0x0B, Rev = 0x01, 10baseT, HDX
PHY 0x0B: OUI = 0x1374, Model = 0x0B, Rev = 0x01, 100baseT, FDX
PHY 0x0C: OUI = 0x1374, Model = 0x0B, Rev = 0x01, 10baseT, HDX
PHY 0x0D: OUI = 0x1A082, Model = 0x00, Rev = 0x05, 10baseT, HDX
PHY 0x10: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x11: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x12: OUI = 0x4A000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x13: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x14: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x15: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x16: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x17: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
PHY 0x18: OUI = 0x0000, Model = 0x00, Rev = 0x00, 10baseT, HDX
(IPQ40xx) #
#############
## PCI ##
#############
(IPQ40xx) # pci
Scanning PCI devices on bus 0
BusDevFun VendorId DeviceId Device Class Sub-Class
_____________________________________________________________
00.00.00 0x17cb 0x1001 Does not fit any class 0x00
00.01.00 0x17cb 0x1001 Does not fit any class 0x00
00.02.00 0x17cb 0x1001 Does not fit any class 0x00
00.03.00 0x17cb 0x1001 Does not fit any class 0x00
00.04.00 0x17cb 0x1001 Does not fit any class 0x00
00.05.00 0x17cb 0x1001 Does not fit any class 0x00
00.06.00 0x17cb 0x1001 Does not fit any class 0x00
00.07.00 0x17cb 0x1001 Does not fit any class 0x00
00.08.00 0x17cb 0x1001 Does not fit any class 0x00
00.09.00 0x17cb 0x1001 Does not fit any class 0x00
00.0a.00 0x17cb 0x1001 Does not fit any class 0x00
00.0b.00 0x17cb 0x1001 Does not fit any class 0x00
00.0c.00 0x17cb 0x1001 Does not fit any class 0x00
00.0d.00 0x17cb 0x1001 Does not fit any class 0x00
00.0e.00 0x17cb 0x1001 Does not fit any class 0x00
00.0f.00 0x17cb 0x1001 Does not fit any class 0x00
00.10.00 0x17cb 0x1001 Does not fit any class 0x00
00.11.00 0x17cb 0x1001 Does not fit any class 0x00
00.12.00 0x17cb 0x1001 Does not fit any class 0x00
00.13.00 0x17cb 0x1001 Does not fit any class 0x00
00.14.00 0x17cb 0x1001 Does not fit any class 0x00
00.15.00 0x17cb 0x1001 Does not fit any class 0x00
00.16.00 0x17cb 0x1001 Does not fit any class 0x00
00.17.00 0x17cb 0x1001 Does not fit any class 0x00
00.18.00 0x17cb 0x1001 Does not fit any class 0x00
00.19.00 0x17cb 0x1001 Does not fit any class 0x00
00.1a.00 0x17cb 0x1001 Does not fit any class 0x00
00.1b.00 0x17cb 0x1001 Does not fit any class 0x00
00.1c.00 0x17cb 0x1001 Does not fit any class 0x00
00.1d.00 0x17cb 0x1001 Does not fit any class 0x00
00.1e.00 0x17cb 0x1001 Does not fit any class 0x00
00.1f.00 0x17cb 0x1001 Does not fit any class 0x00
(IPQ40xx) #
##############
## SMEMINFO ##
##############
(IPQ40xx) # smeminfo
flash_type: 0x6
flash_index: 0x0
flash_chip_select: 0x0
flash_block_size: 0x10000
flash_density: 0x1000000
partition table offset 0x0
No.: Name Attributes Start Size
0: 0:SBL1 0x0000ffff 0x0 0x40000
1: 0:MIBIB 0x001040ff 0x40000 0x20000
2: 0:QSEE 0x0000ffff 0x60000 0x60000
3: 0:CDT 0x0000ffff 0xc0000 0x10000
4: 0:DDRPARAMS 0x0000ffff 0xd0000 0x10000
5: 0:APPSBLENV 0x0000ffff 0xe0000 0x10000
6: 0:APPSBL 0x0000ffff 0xf0000 0x80000
7: 0:ART 0x0000ffff 0x170000 0x10000
8: rootfs 0x0100ffff 0x0 0x3000000
9: rootfs_1 0x0100ffff 0x3000000 0x3000000
10: overlay 0x0100ffff 0x6000000 0x2000000
(IPQ40xx) #
#####################################
## MACRONIX MX25L6433F SPI NOR 8MB ##
## BOOTLOADER PARTITION TABLE DUMP ##
#####################################
root@AIKS0:~/work/flash-dump# binwalk tew-829dru-flashdump.bin
DECIMAL HEXADECIMAL DESCRIPTION
--------------------------------------------------------------------------------
0 0x0 ELF, 32-bit LSB executable, ARM, version 1 (SYSV)
19432 0x4BE8 Ubiquiti partition header, header size: 56 bytes, name: "PARTNUM_SHFT", base address: 0x08A16B46, data size: -1912995176 bytes
81400 0x13DF8 Unix path: /dev/icbcfg/boot
263424 0x40500 ATAGs msm parition table (msmptbl), version: 4, number of paritions: 11
393216 0x60000 ELF, 32-bit LSB executable, ARM, version 1 (SYSV)
618103 0x96E77 XML document, version: "1.0"
983040 0xF0000 ELF, 32-bit LSB shared object, ARM, version 1 (SYSV)
1333829 0x145A45 Certificate in DER format (x509 v3), header length: 4, sequence length: 1284
1333945 0x145AB9 Certificate in DER format (x509 v3), header length: 4, sequence length: 1288
1384888 0x1521B8 CRC32 polynomial table, little endian
1386584 0x152858 CRC32 polynomial table, little endian
1638510 0x19006E Zlib compressed data, default compression
1638630 0x1900E6 Zlib compressed data, default compression
1704046 0x1A006E Zlib compressed data, default compression
1704183 0x1A00F7 Zlib compressed data, default compression
1769582 0x1B006E Zlib compressed data, default compression
1769698 0x1B00E2 Zlib compressed data, default compression
1835118 0x1C006E Zlib compressed data, default compression
1835255 0x1C00F7 Zlib compressed data, default compression
1900654 0x1D006E Zlib compressed data, default compression
1900774 0x1D00E6 Zlib compressed data, default compression
1966190 0x1E006E Zlib compressed data, default compression
1966305 0x1E00E1 Zlib compressed data, default compression
2031616 0x1F0000 uImage header, header size: 64 bytes, header CRC: 0xC7B3D000, created: 2102-10-12 17:35:04, image size: 1929404288 bytes, Data Address: 0x37D7100, Entry Point: 0x28580400, data CRC: 0x6E61, compression type: gzip, image name: "X"
2031726 0x1F006E Zlib compressed data, default compression
2031843 0x1F00E3 Zlib compressed data, default compression
2097152 0x200000 uImage header, header size: 64 bytes, header CRC: 0xC7B3D000, created: 2104-11-27 10:56:08, image size: 1929404288 bytes, Data Address: 0x37D7100, Entry Point: 0x28580400, data CRC: 0x6E61, compression type: gzip, image name: "X"
2097262 0x20006E Zlib compressed data, default compression
4831124 0x49B794 Flattened device tree, size: 37360 bytes, version: 17
4868764 0x4A4A9C Flattened device tree, size: 34223 bytes, version: 17
4903268 0x4AD164 Flattened device tree, size: 41493 bytes, version: 17
4945044 0x4B7494 Flattened device tree, size: 37867 bytes, version: 17
4983192 0x4C0998 Flattened device tree, size: 34223 bytes, version: 17
5017696 0x4C9060 Flattened device tree, size: 37565 bytes, version: 17
5055544 0x4D2438 Flattened device tree, size: 37867 bytes, version: 17
5093692 0x4DB93C Flattened device tree, size: 34077 bytes, version: 17
5128052 0x4E3F74 Flattened device tree, size: 42447 bytes, version: 17
5170780 0x4EE65C Flattened device tree, size: 37964 bytes, version: 17
5209024 0x4F7BC0 Flattened device tree, size: 34376 bytes, version: 17
5767278 0x58006E xz compressed data
5877218 0x59ADE2 xz compressed data
5941066 0x5AA74A xz compressed data
6161706 0x5E052A xz compressed data
6249082 0x5F5A7A xz compressed data
6325606 0x608566 xz compressed data
6354906 0x60F7DA xz compressed data
6420606 0x61F87E xz compressed data
6634942 0x653DBE xz compressed data
6699434 0x6639AA xz compressed data
6779546 0x67729A xz compressed data
6978870 0x6A7D36 xz compressed data
7199646 0x6DDB9E xz compressed data
7295030 0x6F5036 xz compressed data
7448570 0x71A7FA xz compressed data
7663794 0x74F0B2 xz compressed data
7738862 0x7615EE xz compressed data
7949090 0x794B22 xz compressed data
8151782 0x7C62E6 xz compressed data
8244442 0x7DCCDA xz compressed data
8272390 0x7E3A06 xz compressed data
root@AIKS0:~/work/flash-dump#
######################################
## Micron MT29F1G08ABADA NAND 128MB ##
## PARTITION TABLE DUMP ##
######################################
group_pairs Layout blocks found at PEBs: [[0, 1], [384, 385], [801, 921]]
description Create Volume: b'kernel', ID: 0, Block Cnt: 29
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 1119963279, Volume Cnt: 2
description Create Volume: b'kernel', ID: 0, Block Cnt: 30
description Create Volume: b'ubi_rootfs', ID: 1, Block Cnt: 162
description Created Image: 490764789, Volume Cnt: 2
description Create Volume: b'rootfs_data', ID: 0, Block Cnt: 39
description Created Image: 864603106, Volume Cnt: 1
# FROM GPL SOURCE:
root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2# cat common/build/ipq/nand-flash.conf
[mibib]
partition = 0:MIBIB
filename = nand-system-partition-ipq40xx.bin
[sbl1]
partition = 0:SBL1
filename = sbl1_nand.mbn
[bootconfig]
partition = 0:BOOTCONFIG
filename = nand_bootconfig.bin
[bootconfig1]
partition = 0:BOOTCONFIG1
filename = nand_bootconfig1.bin
[ddr-AP-DK01.1-C1]
partition = 0:CDT
filename = cdt-AP.DK01.1-C1.bin
if_machid = 0x8010000
[ddr-AP-DK01.1-C2]
partition = 0:CDT
filename = cdt-AP.DK01.1-C2.bin
if_machid = 0x8010100
[ddr-AP-DK04.1-C1]
partition = 0:CDT
filename = cdt-AP.DK04.1-C1.bin
if_machid = 0x8010001
[ddr-AP-DK04.1-C4]
partition = 0:CDT
filename = cdt-AP.DK04.1-C4.bin
if_machid = 0x8010301
[ddr-AP-DK04.1-C2]
partition = 0:CDT
filename = cdt-AP.DK04.1-C2.bin
if_machid = 0x8010101
[ddr-AP-DK04.1-C3]
partition = 0:CDT
filename = cdt-AP.DK04.1-C3.bin
if_machid = 0x8010201
[ddr-AP-DK06.1-C1]
partition = 0:CDT
filename = cdt-AP.DK06.1-C1.bin
if_machid = 0x8010005
[ddr-AP-DK07.1-C1]
partition = 0:CDT
filename = cdt-AP.DK07.1-C1.bin
if_machid = 0x8010006
[ddr-DB-DK01.1-C1]
partition = 0:CDT
filename = cdt-DB.DK01.1-C1.bin
if_machid = 0x1010002
[ddr-DB.DK02.1-C1]
partition = 0:CDT
filename = cdt-DB.DK02.1-C1.bin
if_machid = 0x1010003
[tz]
partition = 0:QSEE
filename = tz.mbn
[u-boot]
partition = 0:APPSBL
filename = openwrt-ipq40xx-u-boot-stripped.elf
[ubi]
partition = rootfs
filename = openwrt-ipq806x-ipq40xx-ubi-root.img
root@AIKS0:~/work/GPL_SOURCE/GPL_TEW-829DRU_v1/IPQ4019.ILQ.1.2#
###################
## DMESG on BOOT ##
###################
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00103
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1338 - bootable_media_detect_entry, Start
B - 1678 - bootable_media_detect_success, Start
B - 1692 - elf_loader_entry, Start
B - 5068 - auth_hash_seg_entry, Start
B - 7209 - auth_hash_seg_exit, Start
B - 578260 - elf_segs_hash_verify_entry, Start
B - 694350 - PBL, End
B - 694373 - SBL1, Start
B - 781491 - pm_device_init, Start
D - 6 - pm_device_init, Delta
B - 783018 - boot_flash_init, Start
D - 54307 - boot_flash_init, Delta
B - 841348 - boot_config_data_table_init, Start
D - 3840 - boot_config_data_table_init, Delta - (419 Bytes)
B - 848552 - clock_init, Start
D - 7548 - clock_init, Delta
B - 860597 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B - 864084 - sbl1_ddr_set_params, Start
B - 869071 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 873561 - Pre_DDR_clock_init, Start
D - 5 - Pre_DDR_clock_init, Delta
D - 13145 - sbl1_ddr_set_params, Delta
B - 886842 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 956928 - sbl1_wait_for_ddr_training, Start
D - 29 - sbl1_wait_for_ddr_training, Delta
B - 972436 - Image Load, Start
D - 138251 - QSEE Image Loaded, Delta - (269176 Bytes)
B - 1111185 - Image Load, Start
D - 1438 - SEC Image Loaded, Delta - (2048 Bytes)
B - 1121464 - Image Load, Start
D - 208452 - APPSBL Image Loaded, Delta - (426543 Bytes)
B - 1330338 - QSEE Execution, Start
D - 60 - QSEE Execution, Delta
B - 1336505 - SBL1, End
D - 644213 - SBL1, Delta
S - Flash Throughput, 2006 KB/s (698186 Bytes, 348006 us)
S - DDR Frequency, 672 MHz
U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Jan 23 2018 - 20:04:52)
smem ram ptable found: ver: 1 len: 3
DRAM: 256 MiB
machid : 0x8010006
NAND: ID = 9580f12c
Vendor = 2c
Device = f1
ONFI device found
SF: Detected MX25L6405D with page size 4 KiB, total 8 MiB
ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x800000
136 MiB
MMC: qca_mmc: 0
PCI0 Link Intialized
In: serial
Out: serial
Err: serial
machid: 8010006
flash_type: 0
Net: MAC0 addr:3c:8c:f8:f3:96:b2
PHY ID1: 0x4d
PHY ID2: 0xd0b1
Phy ID: 0x8 - MM7 offset 0x8074: 0xAA4B, MM7 offset 0x8076: 0x9271
Phy ID: 0x9 - MM7 offset 0x8074: 0xAA4B, MM7 offset 0x8076: 0x9271
Phy ID: 0xA - MM7 offset 0x8074: 0xAA4B, MM7 offset 0x8076: 0x9271
Phy ID: 0xB - MM7 offset 0x8074: 0xAA4B, MM7 offset 0x8076: 0x9271
Phy ID: 0xC - MM7 offset 0x8074: 0xAA4B, MM7 offset 0x8076: 0x9271
ipq40xx_ess_sw_init done
eth0
Hit any key to stop autoboot: 0
Creating 1 MTD partitions on "nand0":
0x000003000000-0x000006000000 : "mtd=0"
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: attached mtd2 to ubi0
UBI: MTD device name: "mtd=0"
UBI: MTD device size: 48 MiB
UBI: number of good PEBs: 384
UBI: number of bad PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 2
UBI: available PEBs: 185
UBI: total number of reserved PEBs: 199
UBI: number of PEBs reserved for bad PEB handling: 3
UBI: max/mean erase counter: 4/3
Read 0 bytes from volume kernel to 84000000
No size specified -> Using max size (3809280)
## Booting kernel from FIT Image at 84000000 ...
Using 'config@ap.dk07.1-c1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-3.14.43
Type: Kernel Image
Compression: gzip compressed
Data Start: 0x840000e4
Data Size: 3361261 Bytes = 3.2 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 455baf05
Hash algo: sha1
Hash value: 815ee16957306915e27edd00aa3f66ef979b805b
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
Using 'config@ap.dk07.1-c1' configuration
Trying 'fdt@ap.dk07.1-c1' FDT blob subimage
Description: ARM OpenWrt qcom-ipq40xx-ap.dkxx device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x8436c2f8
Data Size: 37922 Bytes = 37 KiB
Architecture: ARM
Hash algo: crc32
Hash value: b448c7b5
Hash algo: sha1
Hash value: c2130265a9512115b7a12df0207d3b0f268068f2
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x8436c2f8
Uncompressing Kernel Image ... OK
Loading Device Tree to 86ff3000, end 86fff421 ... OK
eth0 MAC Address from ART: 3c:8c:f8:f3:96:b2
eth1 MAC Address from ART: 3c:8c:f8:f3:96:b4
eth2 MAC Address from ART: 3c:8c:f8:f3:96:b3
Using machid 0x8010006 from environment
Starting kernel ...
#####################
## CALDATA PACKING ##
#####################
These are the board-2.json files I used (named differently)
This is only required for developers porting devices, the average user will not have to do any of this process.
This is mainly documentation for myself.
What is important here is the overall structure, and the `names` field. Copy it exactly.
The filenames are irrelevant. Yours may be different. Just rename or replace them.
qca4019-artcaldata.json
###
[
{
"names": ["bus=ahb,bmi-chip-id=0,bmi-board-id=28,variant=TEW-829DRU-2G"],
"data": "cal-ahb-0-fresh.bin"
},
{
"names": ["bus=ahb,bmi-chip-id=0,bmi-board-id=30,variant=TEW-829DRU-5G"],
"data": "cal-ahb-1-fresh.bin"
}
]
###
qca9984-artcaldata.json
###
[
{
"names": [
"bus=pci,bmi-chip-id=0,bmi-board-id=1"
],
"data": "cal-pci-fresh.bin"
}
]
###
The commands to run to build the bin file:
###
# CREATE BOARD-2.BIN (QCA9984)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca9984-artcaldata.json -o qca9984-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca9984-boardData.json -o qca9984-boardData.bin
# EXTRACT BOARD-2.BIN - INSIDE tmp/ (QCA9984)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../../qca9984-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../../qca9984-boardData.bin
# CREATE BOARD-2.BINS (QCA4019)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca4019-artcaldata.json -o qca4019-artcaldata.bin
tools/qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -c qca4019-boardData.json -o qca4019-boardData.bin
# EXTRACT BOARD-2.BIN - INSIDE tmp/ (QCA4019)
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../qca4019-artcaldata.bin
qca-swiss-army-knife/tools/scripts/ath10k/ath10k-bdencoder -e ../qca4019-boardData.bin
###
You can make a tmp/ directory, enter it, and run the extraction command in order to extract it back into a board-2.json and the original bin file(s)
Should the JSON look correct (has both entries if there are two) and there are all bin files present (with different names is ok) then you completed a "round trip".
The files are ready for insertion into your dev environment and to be built into the image.
Reference in New Issue View Git Blame Copy Permalink