mediatek: add support for Wavlink WL-WNT100X3
Hardware -------- - SOC: MediaTek MT7981B - RAM: 512MB DDR3 - FLASH: 128MB SPI-NAND ESMT F50L1G41LB - NETWORK: 1 x1000M WAN, 1 x 1000M LAN - WIFI: MediaTek MT7981B 2x2 DBDC 802.11ax 2T2R (2.4/5) - LEDs: 1x STATUS (blue) - USB: 1x USB 3.0 (XHCI) - FAN: 1x 5V FAN Installation / Upgrade Procedure ----------------------------- 1.Log in to the web management page. 2.Select the country code and time zone, set the Wi-Fi password, and click Save. 3.Click "More", navigate to "Developer Options", and enable the SSH function. 4.Log in to the device via an SSH client (default IP is usually 192.168.20.1). 5.Use scp to upload the OpenWrt image(openwrt-mediatek-filogic-wavlink_wl-wnt100x3-squashfs-sysupgrade.bin) to the /tmp directory 6.Perform the flash by running the sysupgrade command (use -n to overwrite the existing configuration) 7.Wait for the device to reboot automatically. Once finished, access the OpenWrt web interface (LuCI) at the default IP 192.168.1.1. MAC Addresses ----------------------------- 2.4GHz: 80:3F:5D:xx:xx:93 (Factory 0x4) LAN : 80:3F:5D:xx:xx:91 (Factory, 0x3fff4) WAN : 80:3F:5D:xx:xx:92 (Factory, 0x3fffa) 5GHz : 02:3F:5D:xx:xx:93 (derived from 2.4GHz MAC, LAA)) Signed-off-by: Fil Dunsky <filipp.dunsky@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22753 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Fil Dunsky
Hauke Mehrtens
parent
7449064f64
commit
829d432ecd
75
target/linux/mediatek/dts/mt7981b-wavlink-wl-wnt100x3.dts
Normal file
75
target/linux/mediatek/dts/mt7981b-wavlink-wl-wnt100x3.dts
Normal file
@ -0,0 +1,75 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7981b-wavlink-wl-wnt100x3.dtsi"
|
||||
|
||||
/ {
|
||||
model = "WAVLINK WL-WNT100X3";
|
||||
compatible = "wavlink,wl-wnt100x3", "mediatek,mt7981b";
|
||||
};
|
||||
|
||||
&spi_nand {
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
|
||||
macaddr_lan: macaddr@3fff4 {
|
||||
reg = <0x3fff4 0x06>;
|
||||
};
|
||||
|
||||
macaddr_wan: macaddr@3fffa {
|
||||
reg = <0x3fffa 0x06>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "fip";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x5a00000>;
|
||||
};
|
||||
|
||||
partition@5f80000 {
|
||||
label = "hw";
|
||||
reg = <0x5f80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
167
target/linux/mediatek/dts/mt7981b-wavlink-wl-wnt100x3.dtsi
Normal file
167
target/linux/mediatek/dts/mt7981b-wavlink-wl-wnt100x3.dtsi
Normal file
@ -0,0 +1,167 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
label-mac-device = &wifi;
|
||||
led-boot = &led_status_blue;
|
||||
led-failsafe = &led_status_blue;
|
||||
led-running = &led_status_blue;
|
||||
led-upgrade = &led_status_blue;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
chosen: chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_blue: led-0 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
button-0 {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
button-1 {
|
||||
label = "mode";
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
gpios = <&pio 25 GPIO_ACTIVE_LOW>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
fan_5v: regulator-fan-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fan";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&fan {
|
||||
pwms = <&pwm 0 40000 0>;
|
||||
fan-supply = <&fan_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "sgmii";
|
||||
phy-handle = <&en8801sc>;
|
||||
nvmem-cells = <&macaddr_lan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
managed = "in-band-status";
|
||||
};
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
nvmem-cells = <&macaddr_wan>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio_bus {
|
||||
en8801sc: ethernet-phy@29 {
|
||||
compatible = "ethernet-phy-id03a2.9471";
|
||||
phy-mode = "sgmii";
|
||||
reg = <29>;
|
||||
reset-gpios = <&pio 39 GPIO_ACTIVE_LOW>;
|
||||
reset-assert-us = <10000>;
|
||||
reset-deassert-us = <20000>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand: flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
|
||||
spi-cal-enable;
|
||||
spi-cal-mode = "read-data";
|
||||
spi-cal-datalen = <7>;
|
||||
spi-cal-data = /bits/ 8 <0x53 0x50 0x49 0x4e 0x41 0x4e 0x44>;
|
||||
spi-cal-addrlen = <5>;
|
||||
spi-cal-addr = /bits/ 32 <0x0 0x0 0x0 0x0 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
pwm_pins: pwm0-pins {
|
||||
mux {
|
||||
function = "pwm";
|
||||
groups = "pwm0_1";
|
||||
};
|
||||
};
|
||||
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
nvmem-cells = <&eeprom_factory>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
@ -134,7 +134,8 @@ mediatek_setup_interfaces()
|
||||
edgecore,eap111|\
|
||||
huasifei,wh3000|\
|
||||
huasifei,wh3000-pro-emmc|\
|
||||
huasifei,wh3000-pro-nand)
|
||||
huasifei,wh3000-pro-nand|\
|
||||
wavlink,wl-wnt100x3)
|
||||
ucidef_set_interfaces_lan_wan eth0 eth1
|
||||
;;
|
||||
bazis,ax3000wm|\
|
||||
|
||||
@ -240,6 +240,7 @@ platform_do_upgrade() {
|
||||
kebidumei,ax3000-u22|\
|
||||
totolink,x6000r|\
|
||||
wavlink,wl-wn573hx3|\
|
||||
wavlink,wl-wnt100x3|\
|
||||
widelantech,wap430x|\
|
||||
yuncore,ax835)
|
||||
default_do_upgrade "$1"
|
||||
|
||||
@ -3294,6 +3294,19 @@ define Device/wavlink_wl-wn573hx3
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wn573hx3
|
||||
|
||||
define Device/wavlink_wl-wnt100x3
|
||||
DEVICE_VENDOR := WAVLINK
|
||||
DEVICE_MODEL := WL-WNT100X3
|
||||
DEVICE_DTS := mt7981b-wavlink-wl-wnt100x3
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
IMAGE_SIZE := 65536k
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7981-firmware \
|
||||
mt7981-wo-firmware kmod-hwmon-pwmfan
|
||||
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += wavlink_wl-wnt100x3
|
||||
|
||||
define Device/widelantech_wap430x
|
||||
DEVICE_VENDOR := Widelantech
|
||||
DEVICE_MODEL := WAP430X
|
||||
|
||||
Loading…
Reference in New Issue
Block a user