mediatek: filogic: add support for TP-Link F65
Add support for TP-Link Festa F65, an AX3000 ceiling mount WiFi 6 AP. Hardware -------- SOC : MediaTek MT7981B 2x A53 RAM : ESMT M15T4G16256A 512MiB Flash : ESMT F50L1G41LB 128 MiB ETH : 1x 1GbE WiFi : MT7976 Buttons : Reset Leds : Blue status led on top Power : DC 12V 1.2A / PoE Installation ------------ 1. Disassemble the device 2. Solder UART to pins VGRT right of the ethernet port 3. Connect UART console (3.3V) 4. Press Ctrl+b to stop in u-boot shell 5. Use `mtkload` to boot `openwrt-initramfs-kernel.bin` via tftp 6. Flash `openwrt-squashfs-sysupgrade.bin` via sysupgrade Revert to OEM firmware ---------------------- 1. Hold reset button while plugging in power 2. Configure host ethernet to 192.168.0.1/24 3. Go to http://192.168.0.254 4. Upload OEM firmware MAC Addresses ------------- LAN : DC:62:79:xx:xx:28 (printed on label) 2.4GHz: DC:62:79:xx:xx:28 5GHz : DC:62:79:xx:xx:29 Signed-off-by: Leonard Anderweit <leonard.anderweit@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22138 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
Leonard Anderweit
Hauke Mehrtens
parent
fe3efbd7da
commit
7449064f64
195
target/linux/mediatek/dts/mt7981b-tplink-f65v1.dts
Normal file
195
target/linux/mediatek/dts/mt7981b-tplink-f65v1.dts
Normal file
@ -0,0 +1,195 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/mt65xx.h>
|
||||
|
||||
#include "mt7981b.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "tplink,f65-v1", "mediatek,mt7981";
|
||||
model = "TP-Link F65 v1";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_status;
|
||||
led-failsafe = &led_status;
|
||||
led-running = &led_status;
|
||||
led-upgrade = &led_status;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status: led_status {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&pio 35 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-buswidth = <4>;
|
||||
spi-rx-buswidth = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "bl2";
|
||||
reg = <0x00000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "boot-config";
|
||||
reg = <0x100000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "boot-config1";
|
||||
reg = <0x200000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
compatible = "u-boot,env";
|
||||
label = "u-boot-env";
|
||||
reg = <0x300000 0x100000>;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "fip0";
|
||||
reg = <0x400000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "fip1";
|
||||
reg = <0x600000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "oops";
|
||||
reg = <0x800000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "ubi";
|
||||
reg = <0x900000 0x2680000>;
|
||||
};
|
||||
|
||||
partition@2F80000 {
|
||||
label = "ubi_1";
|
||||
reg = <0x2F80000 0x2680000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5600000 {
|
||||
label = "factory";
|
||||
reg = <0x5600000 0x800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@5E00000 {
|
||||
label = "runtime_data";
|
||||
reg = <0x5E00000 0xC00000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6A00000 {
|
||||
label = "backup_data";
|
||||
reg = <0x6A00000 0x800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@7200000 {
|
||||
label = "runtime_backup";
|
||||
reg = <0x7200000 0x800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi0_flash_pins: spi0-pins {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
|
||||
conf-pu {
|
||||
pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
};
|
||||
|
||||
conf-pd {
|
||||
pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac1: mac@1 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <1>;
|
||||
phy-mode = "gmii";
|
||||
phy-handle = <&int_gbe_phy>;
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
};
|
||||
@ -122,6 +122,7 @@ mediatek_setup_interfaces()
|
||||
netgear,eax17|\
|
||||
netgear,wax220|\
|
||||
openfi,6c|\
|
||||
tplink,f65-v1|\
|
||||
ubnt,unifi-6-plus|\
|
||||
wavlink,wl-wn573hx3|\
|
||||
widelantech,wap430x|\
|
||||
@ -302,7 +303,8 @@ mediatek_setup_macs()
|
||||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
;;
|
||||
tplink,eap683-lr)
|
||||
tplink,eap683-lr|\
|
||||
tplink,f65-v1)
|
||||
label_mac=$(get_mac_binary "/tmp/factory/default-mac" 0)
|
||||
lan_mac=$label_mac
|
||||
;;
|
||||
|
||||
@ -14,6 +14,9 @@ case "$FIRMWARE" in
|
||||
ln -sf /tmp/tp_data/MT7981_EEPROM.bin \
|
||||
/lib/firmware/$FIRMWARE
|
||||
;;
|
||||
tplink,f65-v1)
|
||||
ln -sf /tmp/factory/radio /lib/firmware/$FIRMWARE
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
ln -sf /tmp/wlan/radio /lib/firmware/$FIRMWARE
|
||||
;;
|
||||
|
||||
@ -221,7 +221,8 @@ case "$board" in
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
tplink,eap683-lr)
|
||||
tplink,eap683-lr|\
|
||||
tplink,f65-v1)
|
||||
addr=$(get_mac_label)
|
||||
[ "$PHYNBR" = "0" ] && echo $addr > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
|
||||
|
||||
@ -22,7 +22,8 @@ preinit_mount_cfg_part() {
|
||||
tplink,re6000xd)
|
||||
mount_ubi_part "tp_data" "tp_data"
|
||||
;;
|
||||
tplink,eap683-lr)
|
||||
tplink,eap683-lr|\
|
||||
tplink,f65-v1)
|
||||
mount_ubi_part "factory" "ubi_factory_data"
|
||||
;;
|
||||
tplink,fr365-v1)
|
||||
|
||||
@ -3091,6 +3091,19 @@ define Device/tplink_re6000xd
|
||||
endef
|
||||
TARGET_DEVICES += tplink_re6000xd
|
||||
|
||||
define Device/tplink_f65-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := F65
|
||||
DEVICE_VARIANT := v1
|
||||
DEVICE_DTS := mt7981b-tplink-f65v1
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-firmware
|
||||
endef
|
||||
TARGET_DEVICES += tplink_f65-v1
|
||||
|
||||
define Device/tplink_fr365-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := FR365
|
||||
|
||||
Loading…
Reference in New Issue
Block a user