mediatek: add support for JioRouter AX6000 JIDU6101
| Component | Details | |------------------|-------------------------------------------------| | **SoC** | MediaTek MT7986A (4× ARM Cortex-A53 @ 2.0 GHz) | | **RAM** | 512 MB | | **Flash** | 256 MB NAND | | **Ethernet** | 5× 10/100/1000 Mbps (1 WAN + 4 LAN) | | **WLAN 2.4 GHz** | MediaTek MT7976GN — 802.11b/g/n/ax, 4×4 MIMO | | **WLAN 5 GHz** | MediaTek MT7976AN — 802.11n/ac/ax, 4×4 MIMO | | **LEDs** | 1× RGB LED (GPIO-controlled) | | **Button** | 1× Reset | | **USB** | Yes | **MAC Addresses:** | Interface | Source | |------------|-------------------------------------------------| | WAN/Label | u-boot-env MTD partition, "mac" (text) | | LAN | WAN + 1 | | 2.4 GHz | WAN + 2 | | 5 GHz | WAN + 3 | --- **1. Prepare TFTP server** Set a static IP on the ethernet interface of your computer (e.g. default: ip `192.168.1.2`, gateway `192.168.1.1`). Download the initramfs image and host it with the TFTP server. **2. Interrupt boot** Attach UART and power on the router. When the boot menu appears, select **Failsafe Mode**, then press `Ctrl-C` to interrupt and enter the U-Boot prompt. **3. Load and run initramfs image** ```sh setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.2 tftpboot 0x46000000 openwrt-mediatek-filogic-jiorouter_ax6000-jidu6101-initramfs-kernel.bin fdt addr $(fdtcontroladdr) fdt rm /signature bootm ``` **4. Flash sysupgrade image** Place the sysupgrade image in `/tmp`, then run: ```sh sysupgrade /tmp/openwrt-mediatek-filogic-jiorouter_ax6000-jidu6101-squashfs-sysupgrade.bin ``` Alternatively, use the sysupgrade option in LuCI. Note: - The raw MTD u-boot-env partition is only used for MAC address storage, while the active U-Boot environment is stored in the UBI volume. - These devices ship with secure boot enabled and stock U-Boot only accepts vendor-signed FIT images. - BL2/FIP cannot be replaced, so the stock signature verification path cannot be disabled directly. - Setting ipaddr='' forces U-Boot to exit the web failsafe path and continue into autoboot. - The custom bootcmd loads OpenWrt from the UBI volume and removes the /signature node before bootm, allowing unsigned OpenWrt FIT images to boot. - Stock U-Boot expects its environment in a UBI volume named u-boot-env, so it is created during initial setup. Signed-off-by: sh3ikh-faisal <sheikhfaisal713@gmail.com> Link: https://github.com/openwrt/openwrt/pull/22201 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit is contained in:
sh3ikh-faisal
Hauke Mehrtens
parent
a07f62f65a
commit
fe3efbd7da
@ -133,6 +133,12 @@ gatonetworks,gdsp)
|
||||
glinet,gl-mt3000)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
||||
;;
|
||||
jiorouter,ax6000-jidu6101)
|
||||
. /lib/upgrade/nand.sh
|
||||
envubi=$(nand_find_ubi ubi)
|
||||
envdev=/dev/$(nand_find_volume "$envubi" u-boot-env)
|
||||
ubootenv_add_uci_config "$envdev" "0x0" "0x80000" "0x80000" "1"
|
||||
;;
|
||||
openembed,som7981)
|
||||
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
||||
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
||||
|
||||
@ -0,0 +1,53 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt7986a-jiorouter-common.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "jiorouter,ax6000-jidu6101", "mediatek,mt7986a";
|
||||
model = "JioRouter AX6000 JIDU6101";
|
||||
};
|
||||
|
||||
&switch {
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@6 {
|
||||
reg = <6>;
|
||||
ethernet = <&gmac0>;
|
||||
phy-mode = "2500base-x";
|
||||
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
283
target/linux/mediatek/dts/mt7986a-jiorouter-common.dtsi
Normal file
283
target/linux/mediatek/dts/mt7986a-jiorouter-common.dtsi
Normal file
@ -0,0 +1,283 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/mt65xx.h>
|
||||
|
||||
#include "mt7986a.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
serial0 = &uart0;
|
||||
led-boot = &led_red;
|
||||
led-failsafe = &led_red;
|
||||
led-running = &led_red;
|
||||
led-upgrade = &led_blue;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs = "dm-mod.create=''";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_red: led-0 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led_green: led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_blue: led-2 {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&pio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
reg = <0 0x40000000 0 0x20000000>;
|
||||
device_type = "memory";
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-3.3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_5v: regulator-5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "fixed-5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ð {
|
||||
status = "okay";
|
||||
|
||||
gmac0: mac@0 {
|
||||
compatible = "mediatek,eth-mac";
|
||||
reg = <0>;
|
||||
phy-mode = "2500base-x";
|
||||
fixed-link {
|
||||
speed = <2500>;
|
||||
full-duplex;
|
||||
pause;
|
||||
};
|
||||
};
|
||||
|
||||
mdio: mdio-bus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
switch: switch@1f {
|
||||
compatible = "mediatek,mt7531";
|
||||
reg = <31>;
|
||||
reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&pio {
|
||||
spi_flash_pins: spi-flash-pins-33-to-38 {
|
||||
mux {
|
||||
function = "spi";
|
||||
groups = "spi0", "spi0_wp_hold";
|
||||
};
|
||||
conf-pu {
|
||||
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-disable;
|
||||
};
|
||||
conf-pd {
|
||||
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
|
||||
drive-strength = <MTK_DRIVE_8mA>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
wf_2g_5g_pins: wf_2g_5g-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_2g", "wf_5g";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
|
||||
wf_dbdc_pins: wf_dbdc-pins {
|
||||
mux {
|
||||
function = "wifi";
|
||||
groups = "wf_dbdc";
|
||||
};
|
||||
conf {
|
||||
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
||||
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
||||
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
||||
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
||||
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
||||
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
||||
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
||||
drive-strength = <MTK_DRIVE_4mA>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi_flash_pins>;
|
||||
status = "okay";
|
||||
|
||||
spi_nand_flash: flash@0 {
|
||||
compatible = "spi-nand";
|
||||
reg = <0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
spi-max-frequency = <52000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-max-ratio = <1>;
|
||||
mediatek,bmt-max-reserved-blocks = <64>;
|
||||
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "BL2";
|
||||
reg = <0x0 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* Only used for MAC address storage.
|
||||
* The active U-Boot environment is stored in UBI.
|
||||
*/
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
factory: partition@180000 {
|
||||
label = "Factory";
|
||||
reg = <0x180000 0x200000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom_factory_0: eeprom@0 {
|
||||
reg = <0x0 0x1000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@380000 {
|
||||
label = "FIP";
|
||||
reg = <0x380000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x580000 0x8c00000>;
|
||||
};
|
||||
|
||||
partition@9180000 {
|
||||
label = "ubi2";
|
||||
reg = <0x9180000 0x5a00000>;
|
||||
};
|
||||
|
||||
partition@eb80000 {
|
||||
label = "MFG";
|
||||
reg = <0xeb80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ed80000 {
|
||||
label = "Reserved";
|
||||
reg = <0xed80000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssusb {
|
||||
vusb33-supply = <®_3p3v>;
|
||||
vbus-supply = <®_5v>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&trng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&eeprom_factory_0>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
pinctrl-names = "default", "dbdc";
|
||||
pinctrl-0 = <&wf_2g_5g_pins>;
|
||||
pinctrl-1 = <&wf_dbdc_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -264,6 +264,11 @@ mediatek_setup_macs()
|
||||
lan_mac=$(macaddr_add "$wan_mac" 1)
|
||||
label_mac=$wan_mac
|
||||
;;
|
||||
jiorouter,ax6000-jidu6101)
|
||||
label_mac=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
wan_mac=$label_mac
|
||||
lan_mac=$(macaddr_add "$label_mac" 1)
|
||||
;;
|
||||
mercusys,mr80x-v3|\
|
||||
mercusys,mr85x)
|
||||
mac_dirty=$(cat "/tmp/tp_data/default-mac" | sed -n 's/^'"MAC"'://p')
|
||||
|
||||
@ -158,6 +158,11 @@ case "$board" in
|
||||
jdcloud,re-cp-03)
|
||||
[ "$PHYNBR" = "1" ] && mmc_get_mac_binary factory 0xa > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
jiorouter,ax6000-jidu6101)
|
||||
addr=$(mtd_get_mac_ascii u-boot-env mac)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $addr 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
keenetic,kap-630|\
|
||||
keenetic,kn-3711|\
|
||||
keenetic,kn-3811|\
|
||||
|
||||
@ -24,6 +24,27 @@ buffalo_initial_setup()
|
||||
ubiformat /dev/mtd$mtdnum -y
|
||||
}
|
||||
|
||||
jiorouter_initial_setup()
|
||||
{
|
||||
[ "$(rootfs_type)" = "tmpfs" ] || return 0
|
||||
|
||||
local mtdnum="$( find_mtd_index ubi )"
|
||||
if [ ! "$mtdnum" ]; then
|
||||
echo "unable to find mtd partition ubi"
|
||||
return 1
|
||||
fi
|
||||
|
||||
ubidetach -m "$mtdnum" 2>/dev/null
|
||||
ubiformat /dev/mtd$mtdnum -y
|
||||
ubiattach -m "$mtdnum"
|
||||
ubimkvol /dev/ubi0 -n 0 -N u-boot-env -s 0x80000
|
||||
|
||||
# Set boot arguments in freshly created U-Boot environment
|
||||
fw_setenv bootcmd 'ubi read 46000000 kernel;fdt addr $(fdtcontroladdr);fdt rm /signature;bootm 0x46000000'
|
||||
fw_setenv bootdelay 0
|
||||
fw_setenv ipaddr ''
|
||||
}
|
||||
|
||||
xiaomi_initial_setup()
|
||||
{
|
||||
# initialize UBI and setup uboot-env if it's running on initramfs
|
||||
@ -209,7 +230,8 @@ platform_do_upgrade() {
|
||||
buffalo,wsr-6000ax8|\
|
||||
cudy,wr3000h-v1|\
|
||||
cudy,wr3000p-v1|\
|
||||
huasifei,wh3000-pro-nand)
|
||||
huasifei,wh3000-pro-nand|\
|
||||
jiorouter,ax6000-jidu6101)
|
||||
CI_UBIPART="ubi"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
@ -455,6 +477,9 @@ platform_pre_upgrade() {
|
||||
[ -z "$delay" ] || [ "$delay" -eq "0" ] && \
|
||||
fw_setenv bootmenu_delay 3
|
||||
;;
|
||||
jiorouter,ax6000-jidu6101)
|
||||
jiorouter_initial_setup
|
||||
;;
|
||||
xiaomi,mi-router-ax3000t|\
|
||||
xiaomi,mi-router-wr30u-stock|\
|
||||
xiaomi,redmi-router-ax6000-stock)
|
||||
|
||||
@ -2014,6 +2014,21 @@ define Device/jdcloud_re-cp-03
|
||||
endef
|
||||
TARGET_DEVICES += jdcloud_re-cp-03
|
||||
|
||||
define Device/jiorouter_ax6000-jidu6101
|
||||
DEVICE_VENDOR := JioRouter
|
||||
DEVICE_MODEL := AX6000
|
||||
DEVICE_VARIANT := JIDU6101
|
||||
DEVICE_DTS := mt7986a-jiorouter-ax6000-jidu6101
|
||||
DEVICE_DTS_DIR := ../dts
|
||||
DEVICE_PACKAGES := kmod-usb3 kmod-mt7915e kmod-mt7916-firmware kmod-mt7986-firmware mt7986-wo-firmware
|
||||
UBINIZE_OPTS := -E 5
|
||||
UBOOTENV_IN_UBI := 1
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += jiorouter_ax6000-jidu6101
|
||||
|
||||
define Device/kebidumei_ax3000-u22
|
||||
DEVICE_VENDOR := Kebidumei
|
||||
DEVICE_MODEL := AX3000-U22
|
||||
|
||||
Loading…
Reference in New Issue
Block a user