kernel: bump 6.18 to 6.18.34

Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.18.34

Removed upstreamed:
  backport-6.18/627-v7.1-net-pse-pd-fix-sign-on-ENOENT-check-in-of_load_pse_p.patch[1]
  ath79/patches-6.18/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch[2]
  ipq40xx/patches-6.18/708-pinctrl-qcom-ipq4019-mark-gpio-as-a-GPIO-pin-function.patch[3]

All other patches automatically rebased via update_kernel.sh

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.18.34&id=dac025c4e8f9c5cf9467eeac8be4639469aa5ac5
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.18.34&id=617a2564d8634c06d19097dc0f89bd3a72bcb1b4
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.18.34&id=00aca89f5e3453b30b73e31aa31099b1433f8370

Build system: x86/64
Build-tested: x86/64-glibc
Run-tested: x86/64-glibc

Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/23618
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>

target/linux/ath79/patches-6.18/301-irqchip-irq-ath79-cpu-drop-OF-init-helper.patch

@@ -1,23 +0,0 @@
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -85,10 +85,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- 		ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
--	irq_wb_chan[2] = irq_wb_chan2;
--	irq_wb_chan[3] = irq_wb_chan3;
--	mips_cpu_irq_init();
--}

target/linux/ath79/patches-6.18/900-unaligned_access_hacks.patch

@@ -312,7 +312,7 @@ SVN-Revision: 35130
  		case IPV6_2292HOPOPTS:
 --- a/net/ipv6/exthdrs.c
 +++ b/net/ipv6/exthdrs.c
-@@ -991,7 +991,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
+@@ -1002,7 +1002,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
  		goto drop;
  	}
  

target/linux/generic/backport-6.18/627-v7.1-net-pse-pd-fix-sign-on-ENOENT-check-in-of_load_pse_p.patch

@@ -1,33 +0,0 @@
-From 33d35975cbead3fa6b738ee57e5e45e14fbe0886 Mon Sep 17 00:00:00 2001
-From: Jonas Jelonek <jelonek.jonas@gmail.com>
-Date: Fri, 15 May 2026 14:31:03 +0000
-Subject: [PATCH] net: pse-pd: fix sign on -ENOENT check in of_load_pse_pis()
-
-of_count_phandle_with_args() returns the count on success and a negative
-errno on failure, including -ENOENT when the "pairsets" property is
-absent. The existing comparison in of_load_pse_pis() checks against
-ENOENT (positive 2) instead of -ENOENT, so the branch is taken for any
-error return: legitimate DTs that omit "pairsets" trigger a spurious
-"wrong number of pairsets" error and probe fails with -EINVAL.
-
-Compare against -ENOENT so a missing "pairsets" property is correctly
-treated as "this PI has no pairsets, continue".
-
-Fixes: 9be9567a7c59 ("net: pse-pd: Add support for PSE PIs")
-Cc: stable@vger.kernel.org
-Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
-Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
-Link: https://patch.msgid.link/20260515143103.1721888-1-jelonek.jonas@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
---- a/drivers/net/pse-pd/pse_core.c
-+++ b/drivers/net/pse-pd/pse_core.c
-@@ -210,7 +210,7 @@ static int of_load_pse_pis(struct pse_co
- 			ret = of_load_pse_pi_pairsets(node, &pi, ret);
- 			if (ret)
- 				goto out;
--		} else if (ret != ENOENT) {
-+		} else if (ret != -ENOENT) {
- 			dev_err(pcdev->dev,
- 				"error: wrong number of pairsets. Should be 1 or 2, got %d (%pOF)\n",
- 				ret, node);

target/linux/generic/backport-6.18/821-02-v7.0-gpio-add-gpio-line-mux-driver.patch

@@ -52,7 +52,7 @@ Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
  L:	linux-gpio@vger.kernel.org
 --- a/drivers/gpio/Kconfig
 +++ b/drivers/gpio/Kconfig
-@@ -1985,6 +1985,15 @@ config GPIO_LATCH
+@@ -1984,6 +1984,15 @@ config GPIO_LATCH
  	  Say yes here to enable a driver for GPIO multiplexers based on latches
  	  connected to other GPIOs.
  

target/linux/generic/kernel-6.18

@@ -1,2 +1,2 @@
-LINUX_VERSION-6.18 = .33
+LINUX_VERSION-6.18 = .34
-LINUX_KERNEL_HASH-6.18.33 = 6f16ff302599f6fe34742890322cf0775703105fbd8767449682fca6af0fb782
+LINUX_KERNEL_HASH-6.18.34 = 640c4732fb42842166db97e032c1fe7e5ff72c85a8982c75b40f74be3555d760

target/linux/generic/pending-6.18/834-ledtrig-libata.patch

@@ -132,7 +132,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  
  /*
   * Define if arch has non-standard setup.  This is a _PCI_ standard
-@@ -939,6 +942,10 @@ struct ata_port {
+@@ -940,6 +943,10 @@ struct ata_port {
  #ifdef CONFIG_ATA_ACPI
  	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
  #endif

target/linux/ipq40xx/patches-6.18/708-pinctrl-qcom-ipq4019-mark-gpio-as-a-GPIO-pin-function.patch

@@ -1,51 +0,0 @@
-From 437579ad9804055132ad40ccc1ba0cc64dbd828b Mon Sep 17 00:00:00 2001
-From: Til Kaiser <mail@tk154.de>
-Date: Mon, 13 Apr 2026 10:29:20 +0200
-Subject: [PATCH] pinctrl: qcom: ipq4019: mark gpio as a GPIO pin function
-
-The qcom pinctrl core supports marking functions that represent GPIO mode
-via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
-GPIO requests for pins that are muxed to the GPIO function.
-
-ipq4019 still describes its gpio function with QCA_PIN_FUNCTION(gpio),
-so it is not treated as a GPIO pin function. As a result, GPIO consumers
-can still conflict with pinctrl states that select the "gpio" function.
-
-Add a QCA_GPIO_PIN_FUNCTION() helper and use it for the ipq4019 gpio
-function, matching how the msm-based qcom drivers handle this.
-
-This allows ipq4019 to keep the GPIO-related pin configuration in DTS
-without tripping over strict pinmux ownership checks.
-
-Fixes: cc85cb96e2e4 ("pinctrl: qcom: make the pinmuxing strict")
-Signed-off-by: Til Kaiser <mail@tk154.de>
----
- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 2 +-
- drivers/pinctrl/qcom/pinctrl-msm.h     | 5 +++++
- 2 files changed, 6 insertions(+), 1 deletion(-)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -480,7 +480,7 @@ static const struct pinfunction ipq4019_
- 	QCA_PIN_FUNCTION(blsp_uart0),
- 	QCA_PIN_FUNCTION(blsp_uart1),
- 	QCA_PIN_FUNCTION(chip_rst),
--	QCA_PIN_FUNCTION(gpio),
-+	QCA_GPIO_PIN_FUNCTION(gpio),
- 	QCA_PIN_FUNCTION(i2s_rx),
- 	QCA_PIN_FUNCTION(i2s_spdif_in),
- 	QCA_PIN_FUNCTION(i2s_spdif_out),
---- a/drivers/pinctrl/qcom/pinctrl-msm.h
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
-@@ -39,6 +39,11 @@ struct pinctrl_pin_desc;
- 					fname##_groups,		\
- 					ARRAY_SIZE(fname##_groups))
- 
-+#define QCA_GPIO_PIN_FUNCTION(fname)				\
-+	[qca_mux_##fname] = PINCTRL_GPIO_PINFUNCTION(#fname,	\
-+					fname##_groups,		\
-+					ARRAY_SIZE(fname##_groups))
-+
- /**
-  * struct msm_pingroup - Qualcomm pingroup definition
-  * @grp:                  Generic data of the pin group (name and pins)