This patch enables for the configuration of the sync_time parameter.
The value of the sync_time needs to be specified in nanoseconds.
The default value is 200us (200 000 ns).
This is especially helpful to get feedback from users about suitable
values. Once a solid solution is found this patch can be removed.
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Link: https://github.com/openwrt/openwrt/pull/22380
[Add patch to kernel 6.18 too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This symbol is selected by CONFIG_BPF, which was already enabled
on generic config-6.18.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This symbol is selected by CONFIG_BPF, which was already enabled
on generic config-6.12.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This symbol depends on the specific CPU type, so we should not
set it globally.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This symbol is selected by CONFIG_BUILTIN_DTB. However, we didn't
enable it in generic config-6.18.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22730
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
GCC generates the same code for 24kc and 34kc. Since we have
converted all 34kc targets to the 24kc, it's better to switch
kernel -mtune to 24kc to avoid confusing developers.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22703
Signed-off-by: Robert Marko <robimarko@gmail.com>
We patch DMA_BUF to make it tristate, so once ALL_KMODS is selected it will
be built as a module even if previously disabled in the config.
So, since IO_URING_ZCRX does not depend on DMA_BUF linking will fail with:
aarch64-openwrt-linux-musl-ld: Unexpected GOT/PLT entries detected!
aarch64-openwrt-linux-musl-ld: Unexpected run-time procedure linkages detected!
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_release_dmabuf':
io_uring/zcrx.c:94:(.text+0x20): undefined reference to `dma_buf_unmap_attachment_unlocked'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:97:(.text+0x30): undefined reference to `dma_buf_detach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:99:(.text+0x3c): undefined reference to `dma_buf_put'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.o: in function `io_import_dmabuf':
io_uring/zcrx.c:125:(.text+0x1b20): undefined reference to `dma_buf_get'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:132:(.text+0x1b34): undefined reference to `dma_buf_attach'
aarch64-openwrt-linux-musl-ld: io_uring/zcrx.c:139:(.text+0x1b48): undefined reference to `dma_buf_map_attachment_unlocked'
make[6]: *** [scripts/Makefile.vmlinux:72: vmlinux.unstripped] Error 1
So, lets use IS_REACHABLE() to check for CONFIG_DMA_SHARED_BUFFER instead
to avoid adding a dependency to CONFIG_DMA_SHARED_BUFFER.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
All targets using ar8327 use OF.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22069
Signed-off-by: Robert Marko <robimarko@gmail.com>
Introduce fix which prevents the kernel from crashing in case the mxl862xx
driver fails to probe due to outdated firmware running on the switch.
Cancel all pending work and prevent rescheduling of counter polling in case
the driver errors out during probe.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CONFIG_TOOLS_SUPPORT_RELR is set during runtime by the kernel so it should
not end up in our static configs.
So, filter it out by default.
Signed-off-by: Robert Marko <robimarko@gmail.com>
If DSA support is enabled, then these will pop up.
So instead of ending up in target configs, add them to the generic configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
The signature of phylink_pcs get_state has changed, and we need to set
.supported_interfaces.
Both has been removed when backporting the driver to Linux 6.12, readd
to make it build and work with Linux 6.18.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://github.com/openwrt/openwrt/pull/22668
Signed-off-by: Robert Marko <robimarko@gmail.com>
Include <linux/version.h> and use preprocessor checks to select the appropriate
prototype and definition for hc_wlan_data_bin_read. The third parameter of bin_attribute
read callbacks was changed to 'const struct bin_attribute *' in Linux 6.18; this
change prevents compilation errors on newer kernels while preserving compatibility
with older ones
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch silences compiler warnings about unused variables by explicitly
casting them to void where appropriate.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Partially reverse https://web.git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-6.18.y&id=39cfd5b12160be4f57df1c3ba60139741c827616
to prevent generation of empty modules.builtin.modinfo and modules.builtin
files that cause modules compilation errors.
If an out-of-tree package or any kernel-install rule ran modprobe xyz while
the build was still in progress, and xyz had been configured =y, a clean tree
would already have xyz listed in modules.builtin; with the empty file produced
by the buggy rule it was missing, so modprobe emitted "module xyz not found"
even though the code was sitting inside the freshly built vmlinux.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch fixes the "Unsupported UART type 4" error by adding support
for the UPIO_AU I/O type in set_io_from_upio() (used by Au1x00 and
RT288x). It assigns the correct serial input/output functions
(io_serial_in, io_serial_out) for proper operation when UPIO_AU is
configured.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport minor fixes for the eip93 driver from upstream.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This patch set introduces support for using the in-tree (mainline)
EIP93 crypto driver for kernel 6.18 and later, along with additional
improvements and fixes:
- Conditional Kconfig/Makefile handling for crypto-hw-eip93 to enable use of the mainline driver with kernel 6.18+.
- Patch 926: Use software AES fallback for small requests in the EIP93 driver.
- Patch 927: Add `mediatek,mtk-eip93` compatible string for upstream kernel device trees.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
- change phy_driver_register and phy_driver_unregister function calls
to phy_drivers_register and phy_drivers_unregister for compatibility
with kernel 6.18
- replace PHY_ANY_ID with "MATCH ANY PHY"
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove symbols no longer present in version 6.18,
add new 6.18 kernel symbols.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/hack-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/pending-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Refreshed patches for generic/backport-6.18 by running
make target/linux/refresh
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove obsolete backport patches already included in kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add define for kernel 6.18.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/21078
Signed-off-by: Robert Marko <robimarko@gmail.com>
