Whenever a variable is needed to denote a smi_bus it is named
accordingly. Fix the last wrong definition.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22866
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
For some unknown reason carving out the mdio bus from the ethernet
node forgot the TP-Link SG2452P. The notation still reads
ðernet0 {
mdio: mdio-bus {
compatible = "realtek,rtl838x-mdio";
...
Like everywhere else it should be
&mdio_bus0 {
PHY_C22(0, 0)
...
Fix that.
Fixes: 57b270684 ("rearrange mdio-bus below mdio-controller")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22866
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Repurpose a currently unused macro to make it usable for common SFP port
definitions. Do so by changing defined properties, drop the fixed link,
etc.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22827
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The pinmux entry for disabling JTAG includes a comment which points to
which GPIOs are sacrificed for using JTAG. However, this comment so far
was only aware of GPIO6 and GPIO7. From RTL931X application notes and
datasheets we know which GPIOs are actually affected here.
Extend the comment to include GPIOs 3-5 too.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22827
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Add a recipe 'rt-loader-bootbase' to build an image with rt-loader for
devices using the Zyxel BootBase/BootExtension chain. They need a plain
bootable image for initramfs (preferably rt-loader with piggy-backed
uImage) and a plain uImage for flashing. The flashable uImage is later
combined with the loader into a signed/checksummed image.
This template recipe can be used directly for GS1920-24HP, making the
initramfs image more flexible due to using uImage instead of plain
image.
Suggested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22827
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This is based on version 1.0.93 plus these commits:
0ca689a fix: fetch base branch to ensure correct PR-only diffs
b7d533d fix: handle fork PRs by fetching via pull/N/head
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix links open the Claude Code desktop app which is not useful in the
OpenWrt contributor workflow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
track_progress: true makes Claude post an initial comment immediately
when triggered and update it with a checklist as it works, so reviewers
can see what Claude is doing rather than waiting for a silent delay.
It also forces tag mode on PR/issue comment events, which is the
correct mode for interactive code review.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Instruct Claude to prefer inline comments for file/line-specific
findings and keep all feedback short and to the point.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Allow Bash(grep:*) so Claude can search the codebase for context
during PR reviews. Without this, grep calls using shell glob patterns
were denied even though plain directory greps were allowed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The workflow already uses contents: read which prevents GitHub from
accepting any push. The --disallowedTools setting adds a second layer
by stopping Claude from even attempting git write operations.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Allow Claude to post inline comments on specific lines when reviewing
PRs via the /claude trigger phrase.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Link: https://github.com/openwrt/openwrt/pull/22897
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The GitHub CI was sometimes still building some tools again even when
the same version was already pre-built. This change fixes the problem
and should improve the speed of the GitHub CI actions. The duration of
the "Build tools" step will be reduced from 5 to 20 minutes down to
10 to 15 seconds.
make also checks that dependencies are not more recent than the target
it wants to build. Previously find returned files in an arbitrary order
and touch set the current timestamp. Since touch is called per file the
timestamps differ in fractional seconds, so not all files got the same
time. make detected a more recent dependency and started to rebuild.
Now all files are set to the same timestamp and make will assume
everything is up to date.
It is sufficient to only touch the stamp files to prevent rebuilding.
Link: https://github.com/openwrt/openwrt/pull/22888
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The defconfig file used to build tools is "tools-only_defconfig".
Though u-boot scripts can still automatically handle the old style
name for compatibility reason, it's better to use the correct name.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22844
Signed-off-by: Nick Hainke <vincent@systemli.org>
It doesn't make sence to build unused tools.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22844
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update to the latest version and add missing 030 patch header.
Changelog:
22aa122eee0 mkimage: Add support for bundling TEE in mkimage -f auto
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22844
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is a safer way to operate the .config file.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22845
Signed-off-by: Nick Hainke <vincent@systemli.org>
Update to the latest stable version. Also add PKG_CONFIG_SYSROOT_DIR
make flag to fix dtc tools build without yaml[1-2].
Patches manually refreshed:
* 003-tools-dumpimage-fix-tools-compile.patch
[1] 0535e46d55
[2] 807bcd844a
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22845
Signed-off-by: Nick Hainke <vincent@systemli.org>
The 6.18 testing kernel for ath79 target is ready now.
Tested on ath79/nand:Netgear R6100
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
CONFIG_PAGE_BLOCK_MAX_ORDER was set to 10 as the page size is 4k.
All other kernel symbols are automatically refreshed by
`make kernel_oldconfig CONFIG_TARGET=target` and
`make kernel_oldconfig CONFIG_TARGET=subtarget`.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
Copy patches and kernel configs from 6.18 kernel to restore the
default 6.12 kernel support files.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
This is a preparation for 6.18 kernel support. It can help us
track the files history by using the Git tool.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22771
Signed-off-by: Nick Hainke <vincent@systemli.org>
Drop support for 6.12 by removing files, patches and kernel configs
since 6.18 is the default now.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22869
Signed-off-by: Nick Hainke <vincent@systemli.org>
Make 6.18 the default kernel version now after the testing phase showed
no big issues.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22869
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add $(Device/uimage-rt-loader) to Device/zyxel_gs1900 to use lzma
compression for the sysupgrade kernel image. This saves approximately
1 MB of flash space compared to the previous gzip compression, leaving
more room for the rootfs overlay.
Signed-off-by: Klaus Rubenstein <klaus.rubenstein@gmail.com>
Tested-by: Sander Vanheule <sander@svanheule.net> # GS1900-{8,48} A1
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Add reset-gpios for both RTL8231 expanders and hog the PHY reset
line on expander@3.
Signed-off-by: Klaus Rubenstein <klaus.rubenstein@gmail.com>
Tested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Add support for the Zyxel GS1900-48HP A1 managed PoE switch based on
RTL8393 SoC with 48 copper ports (6x RTL8218B), 2 SFP slots and PoE
(170W budget). Includes DTS, image definition, network config and
u-boot-env support.
The device has 48 copper ports but only ports 1-24 are powered by
the PoE PSE controller.
PoE support requires the realtek-poe package from the packages feed
with an additional configuration for PSE ID 7 to address the MCU on
this device.
Signed-off-by: Klaus Rubenstein <klaus.rubenstein@gmail.com>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Move the shared hardware description from rtl8393_zyxel_gs1900-48-a1.dts
into a common rtl8393_zyxel_gs1900-48.dtsi include file. This allows
other GS1900-48 variants to reuse the shared definitions.
Signed-off-by: Klaus Rubenstein <klaus.rubenstein@gmail.com>
Tested-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Restore CONFIG_PAGE_BLOCK_MAX_ORDER=10 in malta 6.18 config fragments
to fix build failures where PAGE_BLOCK_MAX_ORDER was undefined.
Support for Linux 6.18 on malta was added after this OpenWrt change:
ac0cb87a45.
Before that integration, the kernel option CONFIG_PAGE_BLOCK_MAX_ORDER=10
was provided in target/linux/generic/config-6.18 and applied broadly.
After the malta 6.18 integration the generic fragment no longer supplied
this option for malta targets, which caused some backported code paths
and drivers to assume PAGE_BLOCK_MAX_ORDER was defined and led
to compilation failures.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/22843
Signed-off-by: Robert Marko <robimarko@gmail.com>
Bump the bundled software pieces to their current version too.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22863
Signed-off-by: Robert Marko <robimarko@gmail.com>
In this target, we only use downstream dts files. And it doesn't
seem like there will be significant changes upstream. Move dts files
to the target dts folder to avoid copying them over and over again
during annual kernel upgrades.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/22876
Signed-off-by: Robert Marko <robimarko@gmail.com>
This release incorporates the following bug fixes and mitigations:
Fixed incorrect failure handling in RSA KEM RSASVE encapsulation.
(CVE-2026-31790)
Fixed loss of key agreement group tuple structure when the DEFAULT keyword
is used in the server-side configuration of the key-agreement group list.
(CVE-2026-2673)
Fixed potential use-after-free in DANE client code.
(CVE-2026-28387)
Fixed NULL pointer dereference when processing a delta CRL.
(CVE-2026-28388)
Fixed possible NULL dereference when processing CMS KeyAgreeRecipientInfo.
(CVE-2026-28389)
Fixed possible NULL dereference when processing CMS
KeyTransportRecipientInfo.
(CVE-2026-28390)
Fixed heap buffer overflow in hexadecimal conversion.
(CVE-2026-31789)
No need refresh patches
Signed-off-by: Jack Sun <sunjiazheng321521@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22847
Signed-off-by: Robert Marko <robimarko@gmail.com>
This change is needed as we move towards removing rtk init from bootloader
and makes it possible to initialize and configure RTL8224 phy driver
Signed-off-by: Harshal Gohel <hg@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/22826
Signed-off-by: Robert Marko <robimarko@gmail.com>
In cases where an nvmem definition is applied to the switch ports,
change to apply to the root gmac so that a randomized MAC address does
not get set.
Also remove the aliases. Since nvmem is used, we don't care about the
bootloader.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22857
Signed-off-by: Robert Marko <robimarko@gmail.com>
Drop two confusing macros 'PHY_PAGE_2' and 'PHY_PAGE_4'. Though we
rather want to have meaningful names instead of magic values everywhere,
those two macros do it totally wrong. They still have the old naming
from times where SerDes was treated as a PHY, and they add no real
context to what page they are actually referring. Thus, replace them
with plain values in their two usages each until we have a better
overall solution.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22885
Signed-off-by: Robert Marko <robimarko@gmail.com>
Cleanup some odd macros still existing from older code. Drop the old
RTL931X_ prefix and use RTPCS_931X_ instead, and drop a totally unused
macro.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22885
Signed-off-by: Robert Marko <robimarko@gmail.com>
Give the one-time PCS init hook a shorter and simpler name, using simply
'init' instead of 'init_serdes_common'. Keep it short and sweet.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22885
Signed-off-by: Robert Marko <robimarko@gmail.com>
Shorten the name of the SerDes ops struct from 'rtpcs_serdes_ops' to
'rtpcs_sds_ops' to be consistent with other naming throughout the
driver.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22885
Signed-off-by: Robert Marko <robimarko@gmail.com>
Drop another few sw() macros.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22853
Signed-off-by: Robert Marko <robimarko@gmail.com>
Convert some coding
- from sw() macros to regmap and
- from mdelay() to msleep()
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/22853
Signed-off-by: Robert Marko <robimarko@gmail.com>
The rss-input-xfrm workaround for Linux 6.6 is no longer needed with
current kernel versions. Remove the patch and the associated
--enable-rss-input-xfrm configure flag.
Link: https://github.com/openwrt/openwrt/pull/22841
Signed-off-by: Nick Hainke <vincent@systemli.org>
A previous commit wrongly renamed a patch file omitting the final 'h'
character. Rename it to again have the correct '.patch' suffix.
Fixes: c23b9256f0 ("mediatek: replace patches with upstream version")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
