The imagestart variable was assigned sizeof(tag) (which incorrectly
computed the pointer size rather than the struct size), but was never
actually read after the assignment in either trx_fixup() or
mtd_fixtrx(). The CRC calculations that follow use
offsetof(struct bcm_tag, header_crc) directly.
Remove the dead variable and its assignments entirely rather than fixing
the sizeof expression. No functional change.
Signed-off-by: Anna Kiri <bredcorn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23546
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
changelog:
https://busybox.net/news.html
remove upstreamed patches:
001-fix-non-x86-build.patch
002-upstream-fix.hexdump.patch
003-hexdump-fix-regression-for-unit16-on-big-endian-systems.patch
see https://github.com/openwrt/openwrt/pull/17107 for updating config
Config refresh:
Refresh commands, run after busybox is first built once, slash or lack of slash at end of path matters!:
cd package/utils/busybox/config/
../convert_menuconfig.pl ../../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.38.0
cd ..
./convert_defaults.pl ../../../build_dir/target-arm_cortex-a15+neon-vfpv4_musl_eabi/busybox-default/busybox-1.38.0/.config > Config-defaults.in
Manual edits needed after config refresh:
* Config-defaults.in: OpenWrt config symbol IPV6 logic applied to
BUSYBOX_DEFAULT_FEATURE_IPV6
* Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to
BUSYBOX_DEFAULT_TRUNCATE (commit 547f1ec)
* Config-defaults.in: OpenWrt logic applied to
BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit dc92917)
* Config-defaults.in: correct the default ports that get reset
BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80
BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23
* config/editors/Config.in: Add USE_GLIBC dependency to
BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit f141090)
* config/shell/Config.in: change at "Options common to all shells" the conditional symbol
SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH
(discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html
Apparently our script does not see the hidden option while
prepending config options with "BUSYBOX_CONFIG_" which leads to a
missed dependency when the options are later evaluated.)
* Edit a few Config.in files by adding quotes to sourced items in
config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit 1da014f)
Signed-off-by: Seo Suchan <tjtncks@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23609
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Bump version to 0.3-rc4, which fixes building with C23.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://github.com/openwrt/openwrt/pull/23620
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for the Micro Crystal RV3028 I2C real-time clock chip.
Tested on a Kontron OSM-S/BL i.MX8MP eval board.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Build ATF images for i.MX8MP. Tested on Kontron OSM-S/BL i.MX8MP.
The default IMX_BOOT_UART_BASE for imx8mp platforms is 0x30890000, which
would be UART2. The Kontron board however uses UART3 as serial debug
console. As a result, after loading BL31 the system hangs.
Setting IMX_BOOT_UART_BASE=auto will fix it.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Introduce a variable inside probe to avoid having to cast const away.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22619
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
In mtd_replace_jffs2(), the return value of malloc(erasesize) is never
checked. If the allocation fails, buf remains NULL and the subsequent
memcpy(buf + ofs, ...) in add_data() will dereference NULL, causing a
segfault.
Add a NULL check and return -1 on allocation failure. Match the
diagnostic message used by the sibling mtd_write_jffs2() so the
out-of-memory cause is visible at the call site.
Signed-off-by: Anna Kiri <bredcorn@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23553
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Version 7.0 - Apr 28, 2026
* Feature: support MSE display (--show-mse)
* Feature: add 2 new link_ext_state names
* Fix: fix index calculation in ixgbe register dump (-d)
* Fix: cmis wavelength tolerance output (-m)
* Fix: duplicate sfpid Active Cu compliance output (-m)
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23574
Signed-off-by: Robert Marko <robimarko@gmail.com>
This version supports boards with 1.5GB or 3GB of RAM.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/23360
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Changes:
https://github.com/lldpd/lldpd/releases/tag/1.0.22
Fixes:
- Fix out-of-bound read access when removing VLAN tag (CVE-2026-46433, issue 787)
- Reject 0-length management address in LLDP
- Fix race condition when creating the control socket
- Fix FDP MAC address
- Fix memory leak in the BSD bridge query path
- Fix duplicate management addresses when merging EDP VLAN frames
Signed-off-by: Paul Donald <newtwen+github@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23567
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Since upstream commit 60e3f1e9b7a5 ("lib/crypto: arm64/sha512:
Migrate optimized SHA-512 code to library"), the kernel module is no
longer available, and its fucntionality os provided by the kernel
core. Thus do not try to package this for linux 6.18 and later.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/21506
Signed-off-by: Robert Marko <robimarko@gmail.com>
- generate or use RSA only if none of the modern algorithms (Ed25519, ECDSA) are supported;
- remove size constraints for key size.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23217
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
- try to detect supported (hostkey) algorithms; otherwise fallback to predefined list;
- remove size constraint for ECDSA: custom build may include only 384 or 521 bit curves;
- remove size constraint for RSA: default RSA key size is 2048 bits which is sufficient for SSH security recommendations, and previous value of 1024 bits is considered insecure.
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23217
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
f5d17dd60a89 mstp: add default Hello Time constant
17c36bebada1 mstp: use default Hello Time in recordTimes
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Add a function to allow drivers to query the pending AQL airtime
for a given txq, for both unicast and broadcast.
This will be used for mt76 to limit buffering in AP mode for power-save
stations.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ELECOM WRC-X3000GST2 is a 2.4/5 GHz band 11ax (Wi-Fi 6) router based on
IPQ5018. The only hardware difference from the WRC-X3000GS2 is the RAM
capacity; all other peripherals are identical. This port therefore
reuses the GS2 board-2.bin (ipq-wifi-elecom_wrc-x3000gs2) and ath11k
calibration variant.
Specification:
- SoC : Qualcomm IPQ5018
- RAM : DDR3 512 MiB (Kingston Technology D2516ECMDXGJD)
- Flash : SPI-NAND 128 MiB (Macronix MX35UF1G24AD-Z4I)
- WLAN : 2.4/5 GHz 2T2R
- 2.4 GHz : Qualcomm IPQ5018 (SoC)
- 5 GHz : Qualcomm QCN6122
- Ethernet : 5x 10/100/1000 Mbps
- wan (phy) : Qualcomm IPQ5018 (SoC)
- lan (switch) : Qualcomm Atheros QCA8337
- LEDs/Keys (GPIO): 8x / 3x (reset, WPS, router/AP slide switch)
- UART : through-hole on PCB, 4pins near the barcode
- assignment : 3.3V, TX, RX, NC, GND from the barcode side
- settings : 115200n8
- Power : 12 VDC, 1 A (Max. 11.5W)
Flash instruction using factory.bin image:
1. Boot WRC-X3000GST2 normally in router mode
2. Access the WebUI ("http://192.168.2.1/") and open the firmware
update page ("ファームウェア更新")
3. Select the OpenWrt factory.bin image and click apply ("適用")
4. After the device reboots automatically, wait until the green power LED
stops blinking and stays solid
5. When the green power LED is solid, hold the reset button until the red
LED starts blinking to clear remaining stock firmware settings
Switching to the stock firmware:
1. Load the elecom.sh script
. /lib/upgrade/elecom.sh
2. Check the current index of rootfs
bootconfig_rw_index 0:bootconfig rootfs
3. Set the index to inverted value
bootconfig_rw_index 0:bootconfig rootfs <value>
bootconfig_rw_index 0:bootconfig1 rootfs <value>
example:
- step2 returned "0":
bootconfig_rw_index 0:bootconfig rootfs 1
bootconfig_rw_index 0:bootconfig1 rootfs 1
- step2 returned "1":
bootconfig_rw_index 0:bootconfig rootfs 0
bootconfig_rw_index 0:bootconfig1 rootfs 0
4. Reboot
Partition Layout (Stock FW):
0x000000000000-0x000000080000 : "0:SBL1"
0x000000080000-0x000000100000 : "0:MIBIB"
0x000000100000-0x000000140000 : "0:BOOTCONFIG"
0x000000140000-0x000000180000 : "0:BOOTCONFIG1"
0x000000180000-0x000000280000 : "0:QSEE"
0x000000280000-0x000000380000 : "0:QSEE_1"
0x000000380000-0x0000003c0000 : "0:DEVCFG"
0x0000003c0000-0x000000400000 : "0:DEVCFG_1"
0x000000400000-0x000000440000 : "0:CDT"
0x000000440000-0x000000480000 : "0:CDT_1"
0x000000480000-0x000000500000 : "0:APPSBLENV"
0x000000500000-0x000000640000 : "0:APPSBL"
0x000000640000-0x000000780000 : "0:APPSBL_1"
0x000000780000-0x000000880000 : "0:ART"
0x000000880000-0x000000900000 : "0:TRAINING"
0x000000900000-0x000003c40000 : "rootfs"
0x000003c40000-0x000003fc0000 : "Config"
0x000003fc0000-0x000007300000 : "rootfs_1"
0x000007300000-0x000007680000 : "Config_2"
0x000007680000-0x000007b80000 : "Reserved"
0x000007b80000-0x000007c00000 : "FWHEADER"
0x000007c00000-0x000007c80000 : "Factory"
Notes:
- This device has dual-boot feature and it's managed by the index in the
0:bootconfig and 0:bootconfig1 partitions.
- Wi-Fi BDF is shared with WRC-X3000GS2 (ipq-wifi-elecom_wrc-x3000gs2)
as the hardware (SoC, QCN6122, antennas) is identical between the two
models.
- GST2 stock firmware keeps its configuration even when sysupgrade is
called with -n. When installing from the OEM WebUI, those stock
settings can be restored into OpenWrt overlay, so settings must be
initialized after the first OpenWrt boot.
MAC Addresses:
LAN : 38:97:A4:xx:xx:40 (0:APPSBLENV, "eth1addr"/"ethaddr" (text))
WAN : 38:97:A4:xx:xx:43 (0:APPSBLENV, "eth0addr" (text))
2.4 GHz: 38:97:A4:xx:xx:41 (0:APPSBLENV, "wifi0" (text))
5 GHz : 38:97:A4:xx:xx:42 (0:APPSBLENV, "wifi1" (text))
Signed-off-by: Taiga Ogawa <zectaiga@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23471
Signed-off-by: Robert Marko <robimarko@gmail.com>
Turris Mox stores the U-Boot environment in SPI NOR flash. Add the
fw_env.config entry pointing to MTD partition 2 at offset 0x0 with
64 KiB env size and sector size, so userspace tools fw_printenv and
fw_setenv work correctly on this board.
Signed-off-by: Štěpán Dalecký <daleckystepan@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23421
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This commit adds support for netis EAP930 V1 ceiling access point.
Specification
-------------
- SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz
- RAM : 256 MiB DDR3 (ESMT M15T2G16128A-EFB)
- Flash : SPI-NAND 128 MiB (ESMT F50L1G41LB-104)
- WLAN : MediaTek MT7976CN dual-band WiFi 6
- 2.4 GHz : b/g/n/ax, MIMO 2x2
- 5 GHz : a/n/ac/ax, MIMO 2x2
- Ethernet : 10/100/1000 Mbps x1 (SoC internal phy)
- USB : No
- Buttons : Reset
- LEDs : 1x Status (red), gpio-controlled
1x Status (blue), gpio-controlled
- Power : 48 VDC (PoE) or 12 VDC, 1.5 A
Installation
------------
1. Connect to the access point using ssh (user: admin, pass: web interface
password)
2. Make mtd backup:
cat /dev/mtd0 | gzip -1 -c > /tmp/mtd0_spi0.0.bin.gz
cat /dev/mtd1 | gzip -1 -c > /tmp/mtd1_BL2.bin.gz
cat /dev/mtd2 | gzip -1 -c > /tmp/mtd2_u-boot-env.bin.gz
cat /dev/mtd3 | gzip -1 -c > /tmp/mtd3_Factory.bin.gz
cat /dev/mtd4 | gzip -1 -c > /tmp/mtd4_FIP.bin.gz
cat /dev/mtd5 | gzip -1 -c > /tmp/mtd5_ubi.bin.gz
3. Download mtd backup from the /tmp dir of the router to your PC using
scp protocol
4. Upload OpenWrt 'bl31-uboot.fip', 'preloader.bin' images to the /tmp
dir of the router using scp protocol
5. Write FIP and BL2 (replace bootloader):
mtd write /tmp/bl31-uboot.fip FIP
mtd write /tmp/preloader.bin spi0.0
6. Place OpenWrt
'openwrt-mediatek-filogic-netis_eap930-v1-initramfs-recovery.itb' image
on the tftp server (IP: 192.168.1.254)
7. Erase 'ubi' partition and reboot the router:
mtd erase ubi
reboot
8. U-Boot automatically boot OpenWrt recovery image from tftp server to
the RAM (1 Gbps link is required)
9. Upload OpenWrt 'sysupgrade.itb' image to the /tmp dir of the router
(IP: 192.168.1.1) using scp protocol
10. Connect to the router using ssh and run:
sysupgrade -n squashfs-sysupgrade.itb
Recovery
--------
1. Place OpenWrt
'openwrt-mediatek-filogic-netis_eap930-v1-initramfs-recovery.itb' image
on the tftp server (IP: 192.168.1.254)
2. Press Reset button and power on the router. After ~10 sec release
the button.
3. Use OpenWrt initramfs system for recovery
Return to stock
---------------
1. Upload stock BL2, FIP, ubi partitions backup archives to the /tmp dir
of the router using scp protocol
2. Connect to the router using ssh and run:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
mtd unlock BL2
mtd unlock FIP
4. Restore backups:
zcat /tmp/mtd1_BL2.bin.gz | mtd write - BL2
zcat /tmp/mtd4_FIP.bin.gz | mtd write - FIP
zcat /tmp/mtd5_ubi.bin.gz | mtd write - ubi
3. Reboot the router:
reboot
UART
----
Connection parameters: 115200, 8N1, 3.3V
UART pins are silkscreened on the PCB.
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| LAN | 88:xx:xx:88:xx:d3 | label |
| WLAN 2g | 88:xx:xx:18:xx:d4 | |
| WLAN 5g | 88:xx:xx:78:xx:d4 | |
+---------+-------------------+-----------+
The LAN MAC (hex) was found in 'Factory', 0x1fef20
The WLAN 2g/5g MAC prototype (hex) was found in 'Factory', 0x4
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23133
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
U-Boot v2026.01 introduced drivers/mtd/nand/spi/otp.c which adds `spinand_user_otp_size()` and
`spinand_fact_otp_size()`. These functions are called unconditionally from `spinand_init()` in
drivers/mtd/nand/spi/core.c to determine whether to set up OTP methods:
if (spinand_user_otp_size(spinand) || spinand_fact_otp_size(spinand)) {
ret = spinand_set_mtd_otp_ops(spinand); /* drivers/mtd/nand/spi/core.c:2369 */
...
}
Both OTP size functions pass `&spinand->user_otp->layout` or `&spinand->fact_otp->layout` to
`spinand_otp_size()` without first checking whether the pointer is NULL. In the standard probing
path, these pointers are assigned by `spinand_match_and_init()` from the per-chip `spinand_info`
table. `100-21-mtd-spi-nand-add-CASN-page-support.patch` adds CASN detection to `spinand_detect()`
so that when a CASN page is found, `spinand_init_via_casn()` is called instead of
`spinand_id_detect()`. As `spinand_match_and_init()` is only called via `spinand_id_detect()`, it
is never invoked for CASN-probed devices.
As a result, `spinand->user_otp` and `spinand->fact_otp` remain NULL from the zero-initialised DM
priv allocation. Both `spinand_user_otp_size()` and `spinand_fact_otp_size()` spuriously return
non-zero by reading `layout->npages` from a small mapped address computed from their respective
NULL pointer, causing `spinand_init()` to call `spinand_set_mtd_otp_ops()` which reads
`spinand->user_otp->ops` and thereby silently assigns a garbage value to `user_ops` that is then
dereferenced at `if (user_ops->info)`.
int spinand_set_mtd_otp_ops(struct spinand_device *spinand)
{
struct mtd_info *mtd = spinand_to_mtd(spinand);
const struct spinand_fact_otp_ops *fact_ops = spinand->fact_otp->ops;
const struct spinand_user_otp_ops *user_ops = spinand->user_otp->ops;
...
if (user_ops) {
if (user_ops->info) /* drivers/mtd/nand/spi/otp.c:343 */
...
...
}
...
}
On COMFAST CF-WR632AX (MT7981, Winbond W25N01GV) this results in a "Synchronous Abort" during boot.
The crash was confirmed via `addr2line` on the U-Boot ELF:
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2ff44 (drivers/mtd/nand/spi/otp.c:343)
lr : 0000000041e2f2f8 (drivers/mtd/nand/spi/core.c:2369)
The same was observed on Acer Predator Connect W6x (MT7986, Winbond W25N02KV):
"Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeeafffffe
elr: 0000000041e2c868 (drivers/mtd/nand/spi/otp.c:343)
lr : 0000000041e2bc1c (drivers/mtd/nand/spi/core.c:2369)
Fix this by adding NULL guards to both OTP size functions so that they return 0 when the pointer is
NULL. With both functions returning 0, the condition in `spinand_init()` evaluates to false and
`spinand_set_mtd_otp_ops()` is never called, skipping setup of OTP methods entirely for CASN-probed
SPI NAND chips.
This change has no effect on SPI NAND chips that do have OTP data but not CASN. For those chips,
`spinand_match_and_init()` sets `spinand->user_otp` and `spinand->fact_otp` to non-NULL values from
the per-chip table, the NULL guard does not activate, and the existing behaviour is unchanged.
Fixes: https://github.com/openwrt/openwrt/issues/23430
Fixes: b94de14baf ("uboot-mediatek: update to v2026.01")
Signed-off-by: Ryan Leung <untilscour@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/23447
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Clean up whitespace and fix LED labels.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/23490
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The BL2 image for mt7987_rfb-emmc should be emmc, not sdmmc.
Fixes: 6d35eda ("uboot-mediatek: add builds for the MediaTek MT7987 reference board")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/23490
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update the uboot-ath79 package to v2026.04 release for ath79 devices.
Tested on:
- NEC Aterm WG600HP (AR9344)
- NEC Aterm WG1400HP (QCA9558)
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/22901
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
The Globitel BT-R320 patch has incorrect line numbers and corrupted
ASCII control characters.
Fixes: a3105d3f95 ("mediatek: filogic: add support for Globitel BT-R320")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23526
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
gpio-button-hotplug skips buttons with button->irq set because it cannot
handle true interrupt-only gpio-keys descriptions. That check also skips
valid GPIO-backed buttons that provide a separate interrupt specifier, such
as the Meraki MX60 reset button.
Try to acquire the GPIO descriptor before deciding that an explicit-IRQ
button is unsupported. Continue to skip true interrupt-only buttons, and
make the IRQ setup and teardown paths ignore skipped entries.
Tested on: Cisco Meraki MX60. Reset button now works.
Fixes: 23845fa10b ("gpio-button-hotplug: do not error on interrupt attached keys")
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23382
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Add support for the AlwayLink M01K43 5G CPE router.
Hardware specifications:
- SoC: MediaTek MT7981B (Filogic 820), dual-core Cortex-A53
- RAM: 256 MiB DDR3 (0x40000000, size 0x10000000)
- Flash: 128 MiB SPI-NAND (UBI, root) + 4 MiB SPI-NOR (bootloader)
- Ethernet: 4x 1 GbE LAN + 1x 2.5 GbE WAN
(MT7531 DSA switch; WAN via RTL8221B 2.5GbE PHY on MAC1)
- WiFi: MT7981 built-in 2x2 802.11ax (2.4 GHz + 5 GHz)
- USB: 1x xHCI (USB 2.0 only; USB 3.0 PHY pins not routed)
- Modem: M.2 B-Key slot wired for USB (tested: Quectel RM551E-GL,
Quectel RM520N-GL via QMI)
- LEDs: 10x GPIO LEDs (status, WAN, LAN, WiFi 2.4/5, signal bars)
- Buttons: WPS, Reset, RFKill
- Power: 12 V DC barrel jack
- UART: 3.3 V TTL header on PCB, 115200 8N1, no flow control
PCB silkscreen: M01K43 v5.0
Manufacturer: Shenzhen AlwayLink Wireless Technology Co., Ltd.
MAC addresses come from the 'ledeinfo' partition (mtd6) at offset 0x18
(label macaddr_ledeinfo_18); the stored value is the LAN MAC.
interface this port vendor firmware
------------------- ----------- --------------------------
eth0 / LAN bridge base + 0 base + 0
eth1 / WAN base + 1 base + 1
wifi 2.4 GHz band@0 base + 2 base (driver-derived)
wifi 5 GHz band@1 base + 3 base + LAA bit (driver)
The vendor's ethernet scheme (LAN = base, WAN = base + 1) is reproduced
exactly. For WiFi the vendor's proprietary mt_wifi driver ignores the
stored per-radio MAC and derives each BSSID from the base by setting the
locally-administered bit, so the radios are not given clean unicast
offsets. Under mainline mt76 + DSA, reusing the base (LAN) MAC on a radio
collides at L2 with the gmac0 conduit, so this port assigns the 2.4 GHz
and 5 GHz radios base + 2 and base + 3 — unique unicast addresses in the
same OUI block.
Installation
------------
Stock firmware defaults (verified on shipping units):
LAN IP: 192.168.100.1
SSH/web: user 'root', password 'admin'
Serial: 3.3 V TTL UART header on PCB, 115200 8N1, no flow control
Image artifacts produced by this device definition:
openwrt-mediatek-filogic-alwaylink_m01k43-squashfs-factory.bin
openwrt-mediatek-filogic-alwaylink_m01k43-squashfs-sysupgrade.bin
Before flashing, back up the per-unit partitions (cannot be
regenerated):
ssh root@192.168.100.1
dd if=/dev/mtd3 of=/tmp/factory.bin bs=1 count=655360
dd if=/dev/mtd6 of=/tmp/ledeinfo.bin bs=1 count=65536
exit
scp root@192.168.100.1:/tmp/factory.bin .
scp root@192.168.100.1:/tmp/ledeinfo.bin .
Method 1 - From an existing OpenWrt install (sysupgrade):
IMG=openwrt-mediatek-filogic-alwaylink_m01k43-squashfs-sysupgrade.bin
scp "$IMG" root@192.168.1.1:/tmp/sysupgrade.bin
ssh root@192.168.1.1 sysupgrade -n /tmp/sysupgrade.bin
Method 2 - U-Boot serial recovery via TFTP (requires 3.3 V USB-UART
adapter):
1. Attach 3.3 V USB-UART (TX, RX, GND) to the PCB header. Open a
terminal at 115200 8N1, no flow control.
2. Configure a TFTP server on the host PC at IP 192.168.2.88.
Place the factory image in the TFTP root, renamed if desired.
3. Power on the router. The BL2/U-Boot banner prints within ~1
second; press any key during the autoboot countdown to enter
the U-Boot menu.
4. From the menu, select 'Upgrade ubi'. U-Boot's default IP is
192.168.2.1 and it expects the TFTP server at 192.168.2.88.
Provide the factory image filename when prompted.
5. Wait for the write to complete; U-Boot reboots into OpenWrt.
Method 3 - From a NAND programmer (brick-recovery path):
1. Clip onto or desolder the SPI-NAND chip and dump the full
128 MiB with a programmer (e.g. RT809H, CH341A with NAND
adapter). Keep the dump as a recovery image.
2. Using the same programmer, write the factory.bin image to
the UBI region of the NAND. The SPI-NOR (BL2/u-boot-env/
Factory/FIP/woem/ledeinfo/nvram) must NOT be erased - those
partitions are per-unit and live on the separate 4 MiB NOR.
3. Reseat the chip and power on. The bootloader on NOR will
load the new kernel and rootfs from UBI.
Signed-off-by: Richard Jones <richard@netsolution.shop>
Link: https://github.com/openwrt/openwrt/pull/22818
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
he_phy_cap and he_mac_cap in phy_capabilities are only populated inside
the iftype_data loop. On 6GHz-only radios (e.g. QCN9074/ath11k_pci),
when capability bytes are unavailable they remain null, causing null
dereferences in device_htmode_append():
Reference error: left-hand side expression is null
if (!(he_phy_cap[3] & 0x80))
Initialise both to [] before the loop and guard the consumer side with
?? [] so bitwise checks conservatively disable beamformer/beamformee/twt
features rather than crashing.
Link: https://github.com/openwrt/openwrt/issues/23488
Signed-off-by: dastarothx <darkastalier@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23496
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
4b274055ede3 libubus: fix NULL dereference on OOM in ubus_queue_msg
8b5be570f13e libubus-acl: fix dangling pointers on blob_memdup failure in acl_recv_cb
9105ea2a349a ubusd_acl: fix NULL dereference on OOM in ubusd_acl_alloc_obj
07d7f34ac278 ubusd_acl: handle allocation failures in ubusd_acl_init_client
497321a5ea90 ubusd_acl: fix NULL dereference on OOM in ubusd_acl_init
f66d52ba983f ubusd_event: fix OOM handling in ubusd_send_event_msg
11ea1b3bdbea ubusd_main: fix async-signal-unsafe SIGHUP handler
0c095592ccb7 ubusd_proto: fix resource leaks and ID tree corruption in ubusd_proto_new_client
f61695e6e12a ubusd_proto: fix NULL dereference for user/group in ubusd_handle_add_watch
7ecacfadd9bc ubusd_proto: fix NULL dereference on OOM in ubusd_proto_init_retmsg
3ab9d7759545 lua: fix inverted argument check in ubus_lua_add
43051ca73aec lua: fix unchecked calloc and memory leak in ubus_lua_load_object
4ca0b141e9a7 ubusd_id: use getrandom(2) unconditionally on Linux
7e4356da8abe ubusd_monitor: fix NULL dereference on OOM in ubusd_monitor_message
5849870f2251 libubus-req: fix file descriptor leaks in ubus_process_req_msg
f29767f90af1 libubus: fix file descriptor leaks in ubus_process_msg
b099d050b59d libubus: make ubus_shutdown idempotent
a564b8dcb395 ubusd_main: check strdup return value in mkdir_sockdir
239edcbaaac8 ubusd_id: fix continue in do-while skipping random ID retry
09d2df45bf38 ubusd: fix NULL dereference on OOM in ubus_msg_enqueue
bcc45ca981fd libubus: actually set FD_CLOEXEC on the ubus socket
8188f5ce8564 libubus-io: close recv_fd captured before get_next_msg failure
7a068bac5a9b libubus-io: byte-swap peer in HELLO when storing as local_id
747013f6ea05 libubus-io: reset sock.fd to -1 after close on ubus_reconnect error path
020a64b9b169 ubusd_acl: use size_t for strlen result in ubusd_acl_alloc_obj
f92ffd289dcc ubusd: use size_t for string and blob length variables
795b32bb96b6 ubusd: use fixed-width types for sequence counters
Link: https://github.com/openwrt/openwrt/pull/23487
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This module adds support for the Corsair Commander Pro and Corsair
Commander Pro (1000D) fan and temperature monitoring controllers.
Signed-off-by: Dee HY <dongfengweixiao@hotmail.com>
Link: https://github.com/openwrt/openwrt/pull/23465
Signed-off-by: Robert Marko <robimarko@gmail.com>
7df188543e26 libfstools: enable f2fs overlay compression formatting
16718b6e3c0f libfstools: mount f2fs overlay with zstd compression
Signed-off-by: Robert Marko <robimarko@gmail.com>
Replace exit(1) on every failure path with return null so callers that
iterate over multiple radios can collect results from the radios that
did succeed instead of aborting on the first one that refuses an
off-channel scan.
Route diagnostics to stderr via warn() so stdout stays clean for
callers parsing JSON output, and include the device name in each
message to disambiguate per-radio failures.
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
1bf2d490484e libfstools: make get_var_from_file() reusable
0b6022439cad mount_root: add kernel parameter to specify the overlay storage name
e600d842ce81 mount_root: add kernel parameter to specify the overlay fileystem type
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
