Currently, logging level of the RADIUS server is a constant corresponding
to the highest verbosity (EXCESSIVE, ALL), but when running as a system
service, the output is discarded.
This commit makes logging verbosity configurable by `log_level` option
and redirects all logs to `logd`. Possible levels are defined in hostap
sources:
https://w1.fi/cgit/hostap/tree/src/utils/wpa_debug.h?id=012a893c469157d5734f6f33953497ea6e3b0169#n23
Their reference is inlined in `radius.config` file.
Default value for logging verbosity is INFO (even if the `-l` flag isn't
specified).
Signed-off-by: Dávid Benko <davidbenko@davidbenko.dev>
Link: https://github.com/openwrt/openwrt/pull/18089
Signed-off-by: Robert Marko <robimarko@gmail.com>
Even though IPv6 support for hostapd RADIUS server is implemented
(flag `-6`), it's not possible to enable it from configuration.
This commit adds this option and adapts init script.
Signed-off-by: Dávid Benko <davidbenko@davidbenko.dev>
Link: https://github.com/openwrt/openwrt/pull/18089
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changes:
c7edc38f libnl-3.11.0 release
b75e27de lib/route: add support for bridge msti
8a73b245 lib/route: add support for bridge info boolopts
3b284a11 lib/route: extend bridge info support
a43a41cd lib/route: add missing bridge info getter functions
756d5161 lib/route: add missing entry in libnl-route-3.sym file
014c33a6 lib/route: add rtnl_neigh ext flags support
acf572b5 route: add support for getting permanent mac address of link
afafe78a lib/route: extend bridge flags
11597b73 xfrm: remove redundant check in xfrm_sa_update_cache()
2abfb089 xfrm: use the new _nl_auto_nl_object helper
831e9868 cache: use the new _nl_auto_nl_object helper
4b9daa6d add _nl_auto_nl_object helper
379a1405 black: fix "target-version" in "pyproject.toml"
8460c9b7 link/bonding: implement parsing link type
d60535c9 link/bonding: implement comparing bond links
22b6cf5c link/bonding: implement io_clone()
e1c75bff link/bonding: add getters for attributes
ee4612ca link/bonding: rename bn_mask to ce_mask
81c40cbb tests: optimize _nltst_assert_route_list_permutate() to short cut search through permutations
9f5fac78 tests: in _nltst_assert_route_list() accept arbitrary order
01f06b57 base: add _nl_swap() helper macro
5b570259 tests: ensure that there are all expected routes in _nltst_assert_route_list()
1aa16ea9 tests: print route list before failure in _nltst_assert_route_list()
7f099cf0 tests: add _nltst_objects_to_string() helper
e76d5697 tests: add _nltst_malloc0() and _nltst_sprintf() helpers
d94a3e81 tests: move definition of asserts in "tests/nl-test-util.h"
798278ea tests: use _nl_ptrarray_len() helper in _nltst_assert_route_list()
def89a2c base: add _nl_ptrarray_len() helper
64fad14b link: link_msg_parser(): keep link info instead of release and reacquire
b8d3cfb2 lib/attr: add nla functions for variable-length integers
2ae88c48 lib/attr: add NLA_{SINT|UINT} attribute types
Link: https://github.com/openwrt/openwrt/pull/18193
Signed-off-by: Nick Hainke <vincent@systemli.org>
It doesn't depend on either usb-net or usb-net-cdc-ncm. It does, however, depend
on mii. Fix thusly, and make it depend explicitly on usb, not usb-net.
While at it, add a conditional dependency on libphy, for future kernel versions.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Now that CONFIG_USB_NET_DRIVERS is unconditionally enabled, remove it from the
usb-net kconfig symbol list.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
This is an industrial 4G router equipped with OpenWrt 14.07 OEM
customized version
WARNING: The original firmware device tree is common to multiple
boards, and the device tree name is H9350. This submitted device
tree is a modified version, which deletes the non-this-device parts
and adds GPIO watchdog.
Specification:
- SoC: MediaTek MT7620A
- Flash: 16 MB
- RAM: 128 MB
- Power: DC 5V-36V 1.5A
- Ethernet: 1x WAN, 4x LAN (10/100 Mbps)
- Wireless radio: 802.11n 2.4g-only
- LED:
System/Power (RUN): GPIO/26 active-low
Ethernet: 1x WAN, 4x LAN
Modem 1: GPIO/66 active-low
RF 1 (Modem 1 Signal): GPIO/67 active-low
Modem 2: GPIO 71 active-low
RF 2 (Modem 2 Signal): GPIO/24 active-low
WLAN: GPIO/72 active-low
WPS: GPIO/12 active-low
- Button:
WPS / RESET: GPIO/34 active-low
- UART: 1x UART on PCB - 115200 8N1
- GPIO Watchdog: GPIO/62 mode=toggle timeout=1s
- PCIe: 2x miniPCIe for modem
- SIM Slots: 2x SIM Slots
Issue:
- No factory partition, eeprom is located
at /lib/firmware/mt7620a.eeprom
Flash instruction:
Using UART:
1. Configure PC with a static IP address and setup an TFTP server.
2. Put rootfs into the tftp directory.
3. Connect the UART line as described on the PCB.
4. Power up the device and press Ctrl+C to break auto boot.
5. Use `system 6` command and follow the instruction to set device
and tftp server IP address and input the rootfs file name.
U-boot will then load the rootfs and write it into
the flash.
6. Use `system 1` command and follow the instruction to set device
and tftp server IP address and input the firmware file name.
U-boot will then load the firmware once.
7. Login to LuCI and use LuCI upgrade firmware.
Original Firmware Dump / More details:
https://blog.gov.cooking/archives/research-hongdian-h8922-and-flash.html
Signed-off-by: Coia Prant <coiaprant@gmail.com>
Tested-by: Coia Prant <coiaprant@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17472
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The kmod-mlxsw-spectrum driver activated CONFIG_DCB indirectly already
on all targets which are building this driver. All other DCB capable
driver did not activate their DCB support.
CONFIG_DCB increases the uncompressed kernel size by about 7.8KB.
CONFIG_DCB is only needed some data center Ethernet cards and not used
on normal routers. Activate it only on the x86_64 and the armsr_arm64
target which are used on normal servers or in VMs.
Link: https://github.com/openwrt/openwrt/pull/17672
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
d8b43985e4d7 ubus: fix token_create policy
7326459bd743 ubus: dump service information on network_get
6c9c8fbd8128 service: add @all as alias for all members, unless defined differently
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This board is also as known as SuperElectron ZN-M5 and ZN-M8. However,
for ZN-M5 and ZN-M8, there's another version uses ZX279128 as CPU
chip, which is unsupported.
You can check it in "高级设置" > "系统日志" > "内核日志" page from webUI.
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: 128 MB SPI-NAND
RAM: 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset, WPS
Power: DC 12V 1A
Stock layout flash instructions:
Login into webUI and upload sysupgrade firmware in "系统管理" > "升级固件" page.
Remember to unselect "保留配置" ("Keep configurations") first before doing that.
OpenWrt U-Boot layout flash instructions:
1. Flash stock layout firmware first.
2. Connect to the device via SSH, and backup everything,
especially 'Factory' partition.
3. Unlock MTD partitions:
apk update && apk add kmod-mtd-rw
insmod mtd-rw i_want_a_brick=1
4. Write new BL2 and FIP:
mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-preloader.bin BL2
mtd write openwrt-mediatek-filogic-cmcc_a10-ubootmod-bl31-uboot.fip FIP
5. Set static IP on your PC:
IP 192.168.1.254/24, GW 192.168.1.1
6. Serve OpenWrt initramfs image using TFTP server.
7. Cut off the power and re-engage, wait for TFTP recovery to complete.
8. After OpenWrt has booted, perform sysupgrade.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Link: https://github.com/openwrt/openwrt/pull/18121
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Trying to tcpdump DSA conduits results in errors such as
"unsupported DSA tag: mtk".
Backport two commits adding support for various DSA tags to libpcap.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
`ucv_array_set` releases the array's reference to the object being cleared.
If this is the last reference to the object, it will be freed, making our
pointer `val` invalid.
To avoid this, we need to obtain our own reference to the object so we
can safely return `val`.
Signed-off-by: Matthew Cather <mattbob4@gmail.com>
Since `wpa_ucode_registry_add` collects its own reference to the values added, the
two functions `hostapd_ucode_bss_get_uval` and `hostapd_ucode_iface_get_uval` would
sometimes return a referenced object (from `uc_resource_new`) and sometimes return
an unreferenced object (from `wpa_ucode_registry_get`). Now, both functions always
return a referenced object.
This change also indirectly fixes `hostapd_ucode_bss_get_uval`, ensuring it now
always returns a referenced object.
Signed-off-by: Matthew Cather <mattbob4@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Remove extra ucv_get calls when passing a referenced value to an object
without using it further.
Signed-off-by: Matthew Cather <mattbob4@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This fixes a common reference counting bug typically along the lines of:
```
uc_value_push(ucv_get(ucv_string_new(...)));
```
This would leave our new string with a reference count of 2, one from
the construction of the string, the other from `ucv_get`. This would
prevent the strings from being correctly cleaned up when it goes out
of scope.
Signed-off-by: Matthew Cather <mattbob4@gmail.com>
APK update is currently broken if wget is used as a tool. This wasn't
correctly tested and cause seg fault. Backport the patch fixing this to
restore original functionality.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for Linksys MR5500 (Hydra 6 Pro).
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Kingston D2516ECMDXGJD (512 MiB)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
QCN9024 (4x4:4 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
QCA8337 switch (4 Ports 10/100/1000 GBASE-T)
* Flash: Gigadevice GD5F2GQ5REYIH (256 MiB)
* LEDs: 1x multi-color PWM LED
1x blue led for USB (GPIO 19 Active High)
* Buttons: 1x WPS (GPIO 27 Active Low)
1x Reset (GPIO 28 Acive Low)
5x ethernet port LEDs (amber for activity & green for link up)
* Peripherals: 1x USB2 (powered by GPIO 17 Active Low)
support for USB3 will be added in a separate PR
* FCC ID: 2AYRA-03734
Flash instructions:
1. On OEM firmware, login to the device (typically at http://192.168.1.1) and click 'CA'
in the bottom right corner -> Connectivity -> Manual Upgrade. Alternatively, browse to
http://<router IP>/fwupdate.html.
Upgrade firmware using openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin image.
Optionally install on second partition, after first boot check actual partition:
fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin kernel
and in case of 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin alt_kernel
2. Installation using serial connection from OEM firmware (default login: root, password: admin):
fw_printenv -n boot_part
In case of 2:
flash_erase /dev/mtd12 0 0
nandwrite -p /dev/mtd12 openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin
or in case of 1:
flash_erase /dev/mtd14 0 0
nandwrite -p /dev/mtd14 openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin
After first boot install firmware on second partition:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin kernel
or:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mr5500-squashfs-factory.bin alt_kernel
3. Back to the OEM firmware.
Download firmware from OEM website:
MR5500: https://support.linksys.com/kb/article/207-en/
From serial or SSH:
fw_printenv boot_part
in case of 1:
mtd -r -e alt_kernel -n write FW_MR5500_1.1.2.209598_prod.img alt_kernel
else in case of 2:
mtd -r -e kernel -n write FW_MR5500_1.1.2.209598_prod.img kernel
4. Boot from USB
This allows you loading an OpenWrt image into RAM and is meant for recovery scenarios only.
Enable loading image from USB in u-boot. From serial or SSH:
fw_setenv bootusb 'usb start && usbboot &loadaddr && bootm $loadaddr'
fw_setenv bootcmd 'run bootusb; if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi'
Copy OpenWrt initramfs image to USB:
dd bs=1M if=openwrt-qualcommax-ipq50xx-linksys_mr5500-initramfs-uImage.itb of=/dev/sda
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17958
Signed-off-by: Robert Marko <robimarko@gmail.com>
75a236be122a service: add missing null pointer check
f5341f327539 ubus: add api for generating and validating security tokens
3fab99eab4d5 add udebug support
28d86bd30e97 pex: only respond to update requests when we have network data
8e6f37cc361e pex-msg: ignore no-data responses if version is zero
12e6cf7f63e1 pex: create pex host from update responses
edc8fdae463a ubus: show the local addresses in network status
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Currently, enabling USB, BT or Netfilter support after initial compilation
will not trigger a rebuild, so add the missing PKG_CONFIG_DEPENDS so
that rebuild gets triggered.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
btmtk.ko is used by btusb.ko and btmtkuart.ko, add it into an own
package and make both packages depend on it.
Fixes: 1c42a0be36 ("kernel: modules: bluetooth: separating UART and USB drivers")
Link: https://github.com/openwrt/openwrt/pull/18110
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
There is some new changes since 12.5.r2 to 12.5.5, so refresh
and update patches.
Changes:
modified: package/kernel/qca-nss-dp/Makefile
modified: package/kernel/qca-nss-dp/patches/0006-nss_dp_main-Use-a-phy-handle-property-to-connect-to-.patch
modified: package/kernel/qca-nss-dp/patches/0008-nss-dp-allow-setting-netdev-name-from-DTS.patch
deleted: package/kernel/qca-nss-dp/patches/0011-01-edma_v1-rework-hw_reset-logic-to-permit-rmmod-and-in.patch
deleted: package/kernel/qca-nss-dp/patches/0011-02-nss_dp_switchdev-correctly-unregister-notifier-on-dp.patch
deleted: package/kernel/qca-nss-dp/patches/0011-03-nss_dp_main-swap-dp_exit-function-call.patch
deleted: package/kernel/qca-nss-dp/patches/0011-04-nss_dp_main-call-unregister_netdev-first-in-dp_remov.patch
deleted: package/kernel/qca-nss-dp/patches/0011-05-nss_dp_main-use-phy_detach-instead-of-disconnect-in-.patch
deleted: package/kernel/qca-nss-dp/patches/0011-06-edma_v1-skip-edma_disable_port-in-edma_cleanup-subse.patch
Log:
2024-10-16 |4c9f671| [qca-nss-dp] removed the calling of fal_port_autoneg_status_get
2024-10-16 |fb33119| Merge "[qca-nss-dp] Change Debug Level of TX Complete Errors"
2024-10-15 |e197b9d| [qca-nss-dp] Change Debug Level of TX Complete Errors
2024-10-03 |1b7aeb1| Merge remote-tracking branch origin/AU_LINUX_QSDK_GINGER_OPEN_TARGET_ALL.12.5.5.230.918 into HEAD
2024-10-01 |830ac73| Merge "[qca-nss-dp] Enable rmmod support for qca-nss-dp module."
2024-06-05 |aef242d| [qca-nss-dp] Enable rmmod support for qca-nss-dp module.
2024-09-18 |b1bfeb6| Merge "[qca-nss-dp] Move pr_info to pr_debug"
2024-09-12 |54aee26| Merge "[qca-nss-dp] Fix Loopback ring teardown path"
2024-09-10 |21f6567| Merge "[qca-nss-dp] Extend Tx Complete errors to track individual error type"
2024-09-10 |7fee76f| Merge "[qca-nss-dp] Destination VP xmit support"
2024-09-09 |0d4ecfd| [qca-nss-dp] Fix Loopback ring teardown path
2024-08-29 |438ab8e| [qca-nss-dp] Move pr_info to pr_debug
2024-08-29 |3f45e3d| Merge "[qca-nss-dp] Fix EDMA Recovery API to Prevent Multiple RX NAPI Add Calls"
2024-08-23 |7a792b1| [qca-nss-dp] Fix EDMA Recovery API to Prevent Multiple RX NAPI Add Calls
2024-07-08 |1227746| [qca-nss-dp] Add support for DDR extended buffer
2024-08-20 |d45bceb| [qca-nss-dp] Extend Tx Complete errors to track individual error type
2024-06-17 |a8f7155| [qca-nss-dp] Destination VP xmit support
2024-08-21 |a5d189b| Merge "[qca-nss-dp] Support for the PPE-VP Qdisc feature"
2024-08-16 |da97bc7| Merge "[qca-nss-dp] Restrict compilation of a file in DP module"
2024-06-22 |bf90fe9| [qca-nss-dp] Support for the PPE-VP Qdisc feature
2024-02-07 |6ceeb8f| [qca-nss-dp] Enable EDMA driver to allocate from beyond 4GB space.
2024-03-19 |4a7ff28| [qca-nss-dp] Restrict compilation of a file in DP module
2024-07-09 |73bad34| [qca-nss-dp] Check for DS node state before getting ppe queue
2024-05-03 |22cdbd6| [qca-nss-dp] Add PPE-DS Enqueue vp to queue mapping
2024-07-04 |5d6ef18| Merge "[qca-nss-dp] NAPI Budget change for KPI improvement"
2024-07-02 |cd0b543| Merge "[qca-nss-dp] Read fake_mac header indication from rx_desc"
2024-07-01 |160b988| [qca-nss-dp] NAPI Budget change for KPI improvement
2024-05-22 |54c2fd1| [qca-nss-dp]: Fixing SA warnings as part of qca-nss-dp module.
2024-06-22 |602534b| [qca-nss-dp] Read fake_mac header indication from rx_desc
2023-11-24 |10210e2| [qca-nss-dp] EDMA register changes for ipq54xx
2024-05-22 |1af0d03| Merge "[qca-nss-dp]: Change to support PPE-VP path for MLO Assist"
2024-05-15 |2acd9f3| [qca-nss-dp]: Change to support PPE-VP path for MLO Assist
2023-09-27 |1ca59f2| [qca-nss-dp] DP changes for ipq54xx
2024-04-18 |bc60c5a| Merge "[qca-nss-dp] Add support for the XGMAC latency computation"
2024-04-18 |6a67d6d| Merge "[qca-nss-dp] Fix the packets processing in the Rx NAPI"
Signed-off-by: Kristian Skramstad <kristian+github@83.no>
Link: https://github.com/openwrt/openwrt/pull/17731
Signed-off-by: Robert Marko <robimarko@gmail.com>
ethtool since version 6.9 introduced support for getting/setting RSS
input transformation supported in Linux since version 6.8.
The now changed kernel ioctl ABI, however, cannot be detected from
userland, and ethtool since version 6.9 simply assumes that a previously
reserved field is now used to set the input transformation.
Unfortunately the default value RXH_XFRM_NO_CHANGE (0xff) used by ethtool
userland creates an incompatibility with older kernels which cannot be
resolved easily without introducing even more ABI breakage.
Work-around the issue and fix support for --set-rxfh and --set-rxfh-indir
ethtool userland tool commands by making the support for input_xfrm
conditional on compile time, and keep it disabled for Linux 6.6.
Fixes: 8c2dcd1518 ("ethtool: update to 6.10")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
b43aeb5 wireless-regdb: assert and correct maximum bandwidth within frequency difference
68588bf wireless-regdb: Update regulatory info for Syria (SY) for 2020
0dda57e wireless-regdb: Update regulatory info for Moldova (MD) on 6GHz for 2022
b19ab0b wireless-regdb: Update regulatory info for Azerbaijan (AZ) on 6GHz for 2024
f67f40d wireless-regdb: Update regulatory info for Oman (OM)
bd70876 wireless-regdb: Update regulatory rules for Armenia (AM) on 2.4 and 5 GHz
6c7cbcc wireless-regdb: Permit 320 MHz bandwidth in 6 GHz band in ETSI/CEPT
f9f6b30 wireless-regdb: Update regulatory rules for Austria (AT)
39b47ea wireless-regdb: Update regulatory info for Cayman Islands (KY) for 2024
3dd7ceb wireless-regdb: allow NO-INDOOR flag in db.txt
4d754a1 wireless-regdb: Update regulatory rules for Iran (IR) on both 2.4 and 5Ghz for 2021
8c8308a wireless-regdb: Update frequency range with NO-INDOOR for Oman (OM)
c2f11e2 wireless-regdb: update regulatory database based on preceding changes
Signed-off-by: Rudy Andram <rmandrad@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17957
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This removes -static compile option. The -static option tells GCC to
link this statically with the libc, which we do not want in OpenWrt. We
want to link everything dynamically to the libc. This fixes a compile
problem with glibc.
References: 71bdff91 "ltq-vdsl-mei: Remove static linking"
Signed-off-by: Andre Heider <a.heider@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18056
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Not all devices need Bluetooth UART and USB drivers to be installed together. Three separate drivers have been created:
- kmod-bluetooth
- kmod-hci-uart
- kmod-btusb
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15118
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Move Bluetooth modules to new Bluetooth menu from Other menu.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/15118
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update iproute2 to 6.13.
Release notes:
https://lwn.net/ml/all/20250120194053.3744d96b@hermes.local/
Allows us to drop multiple upstreamed patches:
package/network/utils/iproute2/patches/013-endian.h.patch
package/network/utils/iproute2/patches/014-basename.patch
package/network/utils/iproute2/patches/015-limits.h.patch
package/network/utils/iproute2/patches/016-limits.h.patch
package/network/utils/iproute2/patches/017-linux-limits.patch
package/network/utils/iproute2/patches/018-linux-limits.patch
Link: https://github.com/openwrt/openwrt/pull/18067
Signed-off-by: Robert Marko <robimarko@gmail.com>
Rebased onto dssp5-base. Baseline is:
ss, tc, stubby, irqbalance, usbutils, ethtool, tcpdump, mtr,
bmon, zram-swap, parted, e2fsprogs, gdisk, block-mount,
kmod-fs-ext4, kmod-fs-f2fs, kmod-usb-storage, f2fs-tools-selinux,
kmod-usb-storage-uas, kmod-usb3, wireguard-tools,
openssh-sftp-server, luci-light, resolveip, blockd
Changes since v2.0:
3dcc957 three issues:
434bad8 /new_root related
04d18a5 README armsr combined-efi
506d8c1 /efi is not a thing in armsr combined-efi
c0db1ed efivarfs remove these filecons
4eb35b7 adds efivars noseclabelfs for armsr combined-efi
bbc6a6b adds /dev/ttyS3 to tty serialtermdev
1467206 README local logins
6ae3185 rename eficapsulemiscnodedev
d43ded0 rename to vportserialtermdev
a47d2f8 fixes virtio port serialtermdev
03aec70 blockmount: make it a bit more robust
70f1ed3 hotplugcall not sure what config triggers this
3338764 boarddetect: i was expecting this
d97548a deal with /dev/tty and /dev/vcs
c6ba4a5 adds virtio block device
d03e216 adds virtio vport serialtermdev for qemu guest agent
2dc0291 validatefirmwareimage: allow getattr of *all* dev chr files
fdfb3a7 adds /dev/efi_capsule_loader for armsr combined target
b129fb9 validatefirmwareimage ordering
b5e81b4 validatefirmwareimage clean up
0932dc5 README typo fixes
a1f88f0 README fix
e6c68be README typo fixes
a232c21 hvcloginserialtermdev: macro not used
d7edd95 support /usr/local and update README
c0d2947 validatefirmwareimage comment
7dbc9b3 validatefirmwareimage: allow find to getattr of dev.except char
f647175 platformtmpfile: elaborate a bit in comment
52f32c1 reintroduce misc.cil
320d77f validatefirmwareimage: /lib/upgrade/platform.sh
365fc65 deal with /efi for combined images
183b412 adds hvc logserialtermdev
20cd42a sshdsysagent: limited support for legacy scp -O with firmware images
1ccee8d validatefirmwareimages: some events related to "combined" images
9b47fc3 jshn reads /dev/urandom
f86def7 adds /tmp/log/apk.log
f1247b3 these are relative to the current namespace
32c0cc8 hotplugcall qemu virtio-console-helper
5cc41f5 uclient-fetch for manually downloading sysupgrade related
c8140bd cgi-io creates firmware and backup atomically
edf517b factoryreset deal with firstboot compatibility
f5116b5 pppd: redundant, is implied with shell client type
86be72c updates README
8c08ca1 luci-mod-system: a bit of speculation here
417f4a5 adds /dev/autofs
1ed537c misc.cil: remove
01d014a selinuxsecfile: be more specific
53fca71 rename blockd module
b4c9b15 ttyloginserialtermdev: ordering
016c3c1 sysagent traversal of /root is enough
d0d7c91 hotplugcall: net/00-sysctl
2821746 adds ttyAMA0 and some incomplete rules for board-detect
Run-tested: ilogic-openwrt_one, ipq40xx-generic-linksys_mr8300
Tested-by: Stefan Hellermann <stefan@the2masters.de>
Signed-off-by: Dominick Grift <dominick.grift@defensec.nl>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250116092312.1350223-1-dominick.grift@defensec.nl/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
On exit, the app tries to do an orderly shutdown of the DSL connection
before it is stopped forcibly. Since the driver does 3 attempts with a
timeout of 2 seconds each, this might take about 6 seconds in the worst
case.
This is problematic on sysupgrade, because any process that doesn't exit
within 4 seconds is killed. This means that the DSL connection might not
be stopped at all before the actual system upgrade begins.
To avoid this, use the newly added option in the driver to not retry the
L3 request on failure.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250130102108.1606919-3-jan@3e8.eu/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This allows to attempt an orderly shutdown via L3 request while avoiding
excessive delay in the failure case (up to 6 seconds with the currently
hard-coded 3 attempts).
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250130102108.1606919-2-jan@3e8.eu/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Commit 7bc487c12e ("kernel: ltq-vdsl-vr9-mei: fix warning about
field-spanning write") patched the driver to use unsafe_memcpy in
MEI_IoctlCmdMsgWrite.
However, this is not actually necessary. The assignment of the variable
"pDestPtr" can be modified so that the compiler knows about the correct
size. This way, the check in the fortified memcpy works correctly.
While at it, also adjust all places where similar code is used to copy
from a CMV_STD_MESSAGE_T struct.
Also mark all related structs as packed, because the code (and the
driver in general) seems to rely on that anyway.
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250206225444.2521817-2-jan@3e8.eu/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Since the update to kernel 6.1, a warning like this appears in the
kernel log:
[ 49.773953] ------------[ cut here ]------------
[ 49.773998] WARNING: CPU: 3 PID: 2349 at target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_msg_process.c:3570 MEI_IoctlCmdMsgWrite+0x290/0x2c8 [drv_mei_cpe]
[ 49.777670] memcpy: detected field-spanning write (size 4) of single field "pDestPtr" at target-arm_cortex-a7+neon-vfpv4_musl_eabi/linux-ipq40xx_generic/dsl_cpe_mei-ugw_8.5.2.10/src/drv_mei_cpe_msg_process.c:3570 (size 2)
...
[ 50.087078] ---[ end trace 0000000000000000 ]---
The variable "pDestPtr" points to the field "header.index" in a
CMV_STD_MESSAGE_T struct (header is a CMV_STD_MESSAGE_HEADER_T struct).
The offending code intentionally copies data beyond this field, which is
followed by "header.length" and "payload".
To fix this, change the assignment of "pDestPtr" to use the pointer to
the message plus the offset of the "header.index" field. This way, the
compiler knows about the size and thus the false positive warning
disappears.
While at it, also adjust all places where similar code is used to copy
from a CMV_STD_MESSAGE_T struct.
Also mark all related structs as packed, because the code (and the
driver in general) seems to rely on that anyway.
Fixes: https://github.com/openwrt/openwrt/issues/17142
Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250206225444.2521817-1-jan@3e8.eu/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The fixes are only for the WRT1900X and WRT1200AC.
It contains:
Deletes the driver's ability to modify the debit table.
Remove skb_get(done_skb) in txdone
Reworking ISR
clean code
Napi replaces tasklet
Add rx_decrypt feature
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Link: https://github.com/openwrt/openwrt/pull/17997
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The latest upstream version of Yafut builds on macOS and other
POSIX-compatible systems. Drop the custom OpenWRT patch applying
non-Linux compatibility fixes to the tool's source code.
Signed-off-by: Michał Kępień <openwrt@kempniu.pl>
Link: https://github.com/openwrt/openwrt/pull/18014
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
he_spr_psr_enabled is appended to hostapd.conf if it's enabled, but hostapd
doesn't support this config, it should be used as an internal flag to control
the he_spr_sr_control configuring.
Signed-off-by: Lix Zhou <xeontz@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/18025
Signed-off-by: John Crispin <john@phrozen.org>
On some devices, the rx/tx bitrate may not always be available
right away, or at all when in mesh mode at plink is blocked causing
the following:
```
Reference error: left-hand side expression is null
In assoclist(), file /usr/share/ucode/iwinfo.uc, line 321, byte 46:
called from function info (/usr/share/ucode/iwinfo.uc:427:33)
called from anonymous function (/usr/bin/iwinfo:108:25)
` bitrate_raw: station.sta_info.tx_bitrate.bitrate,`
Near here -----------------------------------------------^
Reference error: left-hand side expression is null
In assoclist(), file /usr/share/ucode/iwinfo.uc, line 314, byte 54:
called from function info (/usr/share/ucode/iwinfo.uc:427:33)
called from anonymous function (/usr/bin/iwinfo:108:25)
` bitrate: format_rate(station.sta_info.rx_bitrate.bitrate),`
Near here -------------------------------------------------------^
Reference error: left-hand side expression is null
In assoc_flags(), file /usr/share/ucode/iwinfo.uc, line 216, byte 12:
called from function assoclist (/usr/share/ucode/iwinfo.uc:323:51)
called from function info (/usr/share/ucode/iwinfo.uc:427:33)
called from anonymous function (/usr/bin/iwinfo:108:25)
` if (data[k])`
Near here -------^
```
This was seen on Linksys MX5300 in mesh mode (QCA9984).
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18027
Signed-off-by: John Crispin <john@phrozen.org>
* Add missing parentheses in the conditionals for VHT160/VHT160-80PLUS80
and VHT_MAX_MPDU capabilities. The missing parentheses caused the bitwise
AND to be evaluated after the equality comparison due to ECMA's operator
precedence, where `==` has higher precedence than `&`.
* Fix Max MPDU length detection by changing the comparison operators to
`>=` vs `>` otherwise the condition would never be met.
* Add missing default values:
- `true` value for `short_gi_80` (As it exists for `short_gi_20`, `short_gi_40`, `short_gi_160`)
- `7` for `vht_max_mpdu` (Without it the loop in MAX-MPDU-* calculation always compares with null)
* Change the `vht160` condition to `config.vht160 <= 2`. This flag is
`2` by default, and only ever set to `0` when `vht_oper_chwidth < 2`.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18013
Signed-off-by: John Crispin <john@phrozen.org>
Notation for RX-STBC VHT capabilities when specifying number of spatial
streams should be hyphenated, e.g. RX-STBC-1, RX-STBC-2. HT capabilities
use without hyphen, e.g. RX-STBC1, RX-STBC2. This is consistent with
what hostapd expects.
```c
static int hostapd_config_ht_capab(struct hostapd_config *conf,
const char *capab)
{
if (os_strstr(capab, "[RX-STBC1]")) {
conf->ht_capab &= ~HT_CAP_INFO_RX_STBC_MASK;
conf->ht_capab |= HT_CAP_INFO_RX_STBC_1;
}
if (os_strstr(capab, "[RX-STBC12]")) {
conf->ht_capab &= ~HT_CAP_INFO_RX_STBC_MASK;
conf->ht_capab |= HT_CAP_INFO_RX_STBC_12;
}
if (os_strstr(capab, "[RX-STBC123]")) {
conf->ht_capab &= ~HT_CAP_INFO_RX_STBC_MASK;
conf->ht_capab |= HT_CAP_INFO_RX_STBC_123;
}
}
static int hostapd_config_vht_capab(struct hostapd_config *conf,
const char *capab)
{
if (os_strstr(capab, "[RX-STBC-1]"))
conf->vht_capab |= VHT_CAP_RXSTBC_1;
if (os_strstr(capab, "[RX-STBC-12]"))
conf->vht_capab |= VHT_CAP_RXSTBC_2;
if (os_strstr(capab, "[RX-STBC-123]"))
conf->vht_capab |= VHT_CAP_RXSTBC_3;
if (os_strstr(capab, "[RX-STBC-1234]"))
}
```
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18013
Signed-off-by: John Crispin <john@phrozen.org>
When selecting channels above 100 in VHT160+ modes the center
frequency segment was incorrectly set to 50, causing the interface
to not come up.
Change logic to instead check if the channel is within ±28 channels
of the intended center, which matches the actual 160+ MHz channel
width specification for VHT160, HE160, and EHT160.
Signed-off-by: Sean Khan <datapronix@protonmail.com>
Link: https://github.com/openwrt/openwrt/pull/18013
Signed-off-by: John Crispin <john@phrozen.org>
Specifications:
- SoC: Allwinner A31 @ 1GHz
- DRAM: 1/2Gb DDR3
- SD-card slot
- NAND: 8/16Gb MLC
- Ethernet: 1x 10/100/1000Mbps (RTL8211E)
- Wireless: Ampak AP6210 (BCM43362)
- 2x USB2.0
- 1x mPCIe slot for 4G cards
- 1x SIM slot
- HDMI/VGA via simplefb
- RTC with battery
- Power via DC12V / 3A
Installation:
Use the standard sunxi installation to an SD-card. NAND is
not supported.
This is to re-add proper support for an older device.
Link: https://openwrt.org/toh/merrii/hummingbird
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Upgrade the u-boot to a more recent version, and drop and refresh
patches while at it. Additionally, use the correct architecture
when running mkimage.
Runtime-tested:
- SiFive Unleashed
- SiFive Unmatched
Dropped:
0009-riscv-Fix-build-against-binutils.patch
Added:
0006-riscv-sifive-fu740-reduce-DDR-speed-from-1866MT-s-to.patch
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
APK recently introduced python binding support. Disable this sub module
as we don't ship python in normal build to reduce space.
Link: https://github.com/openwrt/openwrt/pull/17925
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
5f127fcc415c convdb: preserve newlines at the end of scripts
e94a2212a0d2 convdb: import package names starting with leading dot
9c0d353c7905 adbdump: use literal block if yaml quoting is needed
93c6a09a8ea8 improve compatibility of shellscripts
6c454d13de9b doc: fix pre/post commit hook documentation
3eb0b70b6d0f solver: rework solver name ordering to fix install_if handling
78c3bdc03cbd solver: make dependencies only packages selectable
373b364ef2a8 build: use the VERSION directly as the soname
6f627d93f5a0 update .gitignore
908f1ee7e87b index, add, pkg: check arch in 'add' only to allow 'index' to work
7c164c471251 index: Fix total always 0
0042b035df53 pkg, db: check arch on apk_db_pkg_add
ffc706689603 applet: always show help for global options
f6a66ebc5876 help: use uppercase usage prefix
7ebb23720483 doc: fix manpage sections
5e5e1f088986 genhelp: reorganize and add --debug output mode
9b371e452fb2 genhelp: do man page link wrangling for COMMANDS text only
2a87e46a354b context: introduce and use apknew_suffix
a6180e4cfa1a meson: add tests option
eb100676c5f0 test: move subdir unit to be the first
a12eae1780e8 test/user/hardlink: be portable to bsd-style stat(1)
f0c096bc034b db: attempt new mount user namespace for chroot in usermode
994e5e4e0006 db: fix "fetch --recurisve" to work
24d8f9677d77 Revert "database: move lock file from /lib/apk to /run/apk"
470432aafe77 applets: simplify option group handling
e1275e2f5010 apk: load global options from /etc/apk/config
8c39b525cd0c add support for repository package name specification
5856cf100241 doc, db: fix repository url_base to be allocated and fetch man page
a0411e87187e cache: fix not to remove indexes
cddca5769e98 apk, commit: support --cache-predownload to first download packages
915e9841ed1c ci: always test all features available
4f94807104e3 commit: print version numbers with --verbose --interactive summary
5bd6d49ac447 fetch: call progress early to avoid flicker
fc66fdfc49cd test: portability fixes
3f73ba343cbd test: shellcheck test suite for bash, dash and busybox
d94671bb1235 test: fixup sourcing testlib.sh to work better with shellcheck
6007db9cdde6 print: refactor progress printing API
a1d7042a2d3b print: further refactor progress API
bed4628c9317 print: reorganize progress to be renderred after apk_out
8cd7362a986c add process main loop to pipe stdout/stderr and logs it
ccfd7ac5e518 db: log script output using apk_process api
3c4594962fb4 db: log uvol output using apk_process api and add tests
fc7768c09497 io_url_wget: log wget output using apk_process api
90a62541751f build: only use VERSION up until first space for soname
378d6360ab17 db: rename apk_db_add_repository to add_repository
5d978c2a5924 db: split open_repository out of add_repository
af812cd28c6d print: simplify code a little bit
4c776eb74997 db: make index refresh notices a progress note
64e053071a89 db: fix non-repository reverese dependency indexing
3cf039322ce1 apk-tools-3.0.0_rc1
90220e710c61 commit: fixup progress during package removal
d11521ec6309 apk-tools-3.0.0_rc2
dc191820b1c4 solver: fix name resolving order of pure virtual names
7da628bc455f libfetch: remove remaining ftp references
10b467c0992a libfetch: remove error generation script
b5b130e1d628 print: flush after progress notice if needed
d71722b9a637 libfetch: rework error codes API
7b0b69a3023f commit: advise on using upgrade --prune and/or --available
1fd82ea2d7dc test: fix spelling s/shuld/should
8eb22149138f process: move apk_exit_status_str as static function
752ee96a25b1 db: refactor repository parsing and url printing
bfa763904fe4 doc: update apk-keys(5) and apk-repositories(5)
165333af1a35 db: introduce and use apk_db_foreach_repository
8e98d6889c92 libfetch: remove unused file scheme and manual pages
30b1c0348d6b remove usage of TRUE/FALSE
fa19887d741c crypto: use explicit algorithm fetching for openssl >=3.0
a706cbdfd5b1 crypto: remove support for obsolete md5
35a57547a7d7 db: remove APK_REPOSITORY_CACHED and use cache_repository
7f616711636c db: const correctness for apk_db_pkg_available
2cda62cd3a4c io: adjust scheme detection in apk_url_local_file()
50a2c12a32b8 db: make repo.url_index a pure blob
a186267a8822 db: make repo.url_base_printable prefix of url_index_printable
9fb473c6a269 add .editorconfig
088c584bf515 mkndx: introduce --filter-spec to filter existing index
0c3188793243 atom: remove apk_atomize_dup0
866374c7cda0 python: add initial python binding
bdf492471328 python: add unittests
9afe8dae79a0 ci: install python3-dev
df3424e5c8cd python: move version to a submodule
3e65a63aa4f1 apk-tools-3.0.0_rc3
946027f6abde test: extend blob_split tests
e73b5e313998 db: do not add empty arch
a6c84f8f62f7 atom: use null atom also for zero length blobs
fb8eef15dc52 db: handle not found names in __apk_db_foreach_sorted_package
0ef8a2223cca commit: don't trigger question with --prune/--available warning
fe484a5c06b9 atom: remove apk_atomize
70fc828cf06b update: make --update-cache and and 'update' behave the same
04e83acfb9b9 upgrade: fix previous commit
cdeebc01283d test: add mkpkg/add symlink test
c2f21ce06a67 mkpkg: do not include filename on error message
de0a4886a91c fs_fsys: do not leave temporary files after failed commit
e5e362c1a65c doc: update --cache-max-age documentation
8d41ff40b59a fetch: fix fetch_err_make() for 32-bit arches
2526fd73bc66 walk_gentext: make state per-module, use apk_ostream for output
bb65553e6423 walk_genadb: make state per-module
a920e5976127 adb_walk: rename scheme to start_scheme and always call end for it
92c573fac280 adb_walk: separate string and numeric values
fe4876bd3a4e adbdump: add support for json output
66cc8da577f0 walk_adb: always call the string scalar function
40bfa97ce3e3 adb: reset dynamic on freeing adb_obj
7519b70d42d1 convert adb_walk_gen* to apk_serializer_*
64c484730c9f add missing serialize.c
83e85aaee220 add missing apk_serialize.h
f70638e12ccc serializer: simplify schema and array handling
9bfc259d9fdb serializer: merge start_schema and start_object to one op
a23368b38ff6 serialize_yaml: improve quoting detection
3a33e75b92aa serialize_adb: move from libapk to apk executable
f5c3fd843824 info: fix -W with symlinks
d54fdb753135 update, version: do not print unavailable repositories
8223c10d4c33 doc: extract arguments are files
a3b4ebcefa3b serialize_yaml/adb: support single quoting, and fixes
77aff1daa967 db: fix --no-cache
f0e3aa4c139d mkpkg: do not call openat() with null pathname
28770f552f4e adb: fix adb_block_init check when extended block is needed
1ca73b6ae892 blob: apk_blob_push_int use uint64_t as value
0b159e23432e print: use uint64_t for progress api progress type
5da830ba51d0 db, commit, print: use uint64_t for file size types
a7b5d8d8eeb9 mkndx, extract: use uint64_t for file size types
639f8ab8d9cd io: use uint64_t for file size as needed
49905d47ee90 io: introduce and use apk_istream_skip
8d83f18647d4 defines: drop muldiv and mulmod helpers
d373a9a6971e db: drop now unused apk_repo_format_cache_index
5700b195d67d pkg: update script execution logging style
00c51e267162 pkg: cap sizes that are allowed for scripts and some v2 fields
5157c540d732 io: fix segment_close to read the inner stream
ad741fe98b72 db: implement system repository list configuration path
6ca1831ed563 use #pragma once instead of ifdef guards
64254d190b32 db, ctx: add and use allocator in apk_ctx
581825bb0811 fix handling of etc/apk/config options with an argument
508b312df637 apk: add APK_CONFIG to overwite path to config file
0e8e7e5a8264 test: fix busybox realpath compat
0186a6aa9d5c apk: support loading configuration options from /lib/apk/config
0c52242990f4 db: fix package name orphan check
a7766c933853 add: don't print misleading error after failed non-repository check
4254863de6ac introduce and use apk_array_foreach and apk_array_foreach_item
b276b3c50618 serialize: separate apk_ser_string and its multiline variant
91dc10b1cddf blob: introduce and use apk_blob_foreach_token
d345a9aa6d25 adbgen: split adbgen specific code to separate file
00522cd60e18 apk: introduce and use APK_OPTVAL_* macros
7f8a1ca12465 list, search: fix origin existence checks
b0bb4a99378b adb: allow copying larger arrays
3fe4258d4c1b mkndx: fix matching packages from old index
b263d961ba12 libfetch/http: reuse fetch_netrc_auth for http(s)
1d4ed5525f54 ctype: fix apk_blob_{spn,cspn} for non-ascii characters
1fa9f3c221c7 genhelp.lua: don't match underscores in the middle of words
48980518436f ctx, trust: load public keys also from lib/apk/keys
ba38d6584599 mkndx: remove --rewrite-arch
a9ea20e37029 context: fix --keys-dir
8abae4785c78 various: fix compilation error for missing inttypes.h
fdb10df21486 various: fix compilation error for missing limits.h
89ef2b546087 database: fix compilation error for missing sched.h
8afd4ab47200 process: correctly handle error from pipe2 and open
1cbbf7457721 crypto_openssl: make sha global variables constant for OpenSSL < 3
025710552ac8 io: fix compilation error for missing stdarg.h
908efa92701c libfetch: allow obsolete date format in http timestamps
70494b5bcdf9 apk: add support for boolean flag arguments
16ab8c549a06 apk: add --cache-packages to enable package caching always
460d62ee743c db: extend repositories file format with commands
34771ccb7964 apk-tools-3.0.0_rc4
Link: https://github.com/openwrt/openwrt/pull/17925
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The SPNMX56 is an ISP-branded and distributed device similar to the MX5500
with the same Wifi chips (IPQ5018 for 2.4G and QCN9074 for 5G) but has an
additional QCA8081 PHY providing a 2.5gbps ethernet WAN port.
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Winbond W634GU6NB-11 (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
QCN9024 (4x4:4 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
QCA8337 switch (3 Ports 10/100/1000 GBASE-T) and a
QCA8081 phy (up to 2.5 Gbps)
* Flash: Gigadevice GD5F2GM7RExxG (256 MiB)
* LEDs: 1x multi-color PWM LED
* Buttons: 1x WPS (GPIO 27 Active Low)
1x Reset (GPIO 28 Acive Low)
Flash instructions:
1. On OEM firmware, login to the device (typically at http://192.168.1.1)
and click 'CA' in the bottom right corner -> Connectivity ->
Manual Upgrade. Alternatively, browse to http://<router IP>/fwupdate.html
Upload openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin
Optionally flash 2nd partition, after first boot check actual partition:
fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin kernel
and in case of 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin alt_kernel
2. Installation using serial connection from OEM firmware
hit Enter once booted and enter credentials (login: root, password: admin)
fw_printenv -n boot_part
In case of 2:
flash_erase /dev/mtd12 0 0
nandwrite -p /dev/mtd12 openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin
or in case of 1:
flash_erase /dev/mtd14 0 0
nandwrite -p /dev/mtd14 openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin
After first boot install firmware on second partition:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin kernel
or:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_spnmx56-squashfs-factory.bin alt_kernel
3. Back to the OEM firmware.
Download firmware from OEM website:
Firmware for this device cannot be searched for on the Linksys website.
Instead, we'd have to use serial to intercept the URL of the firmware
while it's trying to update. Firmware is ISP specific:
Toob (UK): http://download.linksys.com/updates/20241125t080737/FW_MX56TB_1.0.1.216218_prod.img
The intention is to collect URLs for different ISPs on a wiki page.
From serial or SSH:
fw_printenv boot_part
in case of 1:
mtd -r -e alt_kernel -n write FW_MX56TB_1.0.1.216218_prod.img alt_kernel
else in case of 2:
mtd -r -e kernel -n write FW_MX56TB_1.0.1.216218_prod.img kernel
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17968
Signed-off-by: Robert Marko <robimarko@gmail.com>
Aliyun AP8220 is an AP manufactured by Edgecore.
(Very similar to Edgecore EAP102)
Hardware specifications:
SoC: Qualcomm IPQ8071A
RAM: 1GB of DDR4 600MHz
Flash1: MX25U3235F 4MB
Flash2: MX30UF1G18AC 128MB
Ethernet: 2x 2.5G RJ45 port
USB: 2x USB-A 2.0 port
WiFi1: QCN5024 2.4GHz
WiFi2: QCN5054 5GHz
Power: DC 12V / PoE
Flash instructions:
1. Connect the router via serial port
2. Keep pressing @ until uboot is interrupted
3. Download the initramfs image, rename it to
initramfs.bin, host it with tftp server
4. Run these commands:
tftpboot initramfs.bin
bootm
5. After openwrt boots up, use scp or luci
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/17970
Signed-off-by: Robert Marko <robimarko@gmail.com>
Changes between 3.0.15 and 3.0.16 [11 Feb 2025]
CVE-2024-13176[1] - Fixed timing side-channel in ECDSA signature
computation.
There is a timing signal of around 300 nanoseconds when the top word of
the inverted ECDSA nonce value is zero. This can happen with significant
probability only for some of the supported elliptic curves. In
particular the NIST P-521 curve is affected. To be able to measure this
leak, the attacker process must either be located in the same physical
computer or must have a very fast network connection with low latency.
CVE-2024-9143[2] - Fixed possible OOB memory access with invalid
low-level GF(2^m) elliptic curve parameters.
Use of the low-level GF(2^m) elliptic curve APIs with untrusted explicit
values for the field polynomial can lead to out-of-bounds memory reads
or writes. Applications working with "exotic" explicit binary (GF(2^m))
curve parameters, that make it possible to represent invalid field
polynomials with a zero constant term, via the above or similar APIs,
may terminate abruptly as a result of reading or writing outside of
array bounds. Remote code execution cannot easily be ruled out.
1. https://www.openssl.org/news/vulnerabilities.html#CVE-2024-13176
2. https://www.openssl.org/news/vulnerabilities.html#CVE-2024-9143
Build system: x86/64
Build-tested: bcm27xx/bcm2712
Run-tested: bcm27xx/bcm2712
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17947
Signed-off-by: Robert Marko <robimarko@gmail.com>
Upgrade the OpenSBI firmware used by RISC-V CPUs to 1.6.
Runtime-tested:
- d1 (LicheeRV Dock)
- sifiveu (SiFive Unleashed)
Updates since last release:
1.6:
Support for parsing riscv,isa-extensions DT property
Setup serial console very early in cold boot path
Support for multiple heaps and aligned memory allocation
Support for shadow stacks (Zicfiss) ISA extension
Support for landing pads (Zicfilp) ISA extension
Support for per-domain data
Support for double-trap (Smdbltrp/Ssdbltrp) ISA extensions
DT-based configurable heap size
Common fdt_driver and helpers for driver initialization
Support for SBI PMU raw event v2 (Experimental)
Simple FDT based mailbox driver framework
RPMI shared memory transport driver (Experimental)
RPMI system reset driver (Experimental)
Simple FDT based system suspend driver framework
RPMI system suspend driver (Experimental)
Simple FDT based HSM driver framework
RPMI HSM driver (Experimental)
Simple FDT based CPPC driver framework
RPMI CPPC driver (Experimental)
SBI Message Proxy (MPXY) extension (Experimental)
Simple FDT based MPXY driver framework
Common RPMI client driver for MPXY (Experimental)
Support for vector misaligned load/store
1.5.1:
Save/restore menvcfg only when it exists
Adjust Sscofpmf mhpmevent mask for upper 8 bits
Fix potential NULL pointer dereferences in SBI DBTR
Fix incorrect size passed to sbi_zalloc() in SBI FWFT
Check result of pmp_get() in is_pmp_entry_mapped()
1.5:
SBI debug triggers (DBTR) extension (Experimental)
Support to specify coldboot harts in DT
Relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR
Smcsrind and Smcdeleg extensions support
SBIUnit testing framework
Initial domain context management support
Platform specific load/store emulation callbacks
New trap context
Improved sbi_trap_error() to dump state in a nested trap
SBI supervisor software events (SSE) extension (Experimental)
Simplified wait_for_coldboot() implementation
Early wakeup of non-coldboot HART in the coldboot path
Sophgo CV18XX/SG200X series support
APLIC delegation DT property fix
Svade and Svadu extensions support
SBI firmware features (FWFT) extension (Experimental)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
The FDB roaming issues were observed on ipq807x and ipq60xx boards.
The fix depends on API exposed only when NSS_DP_PPE_SUPPORT is enabled.
However, this flag applies to above mentioned platforms only and is
causing the logs to be flooded on other QCA platforms, including ipq50xx,
with:
[ 34.893418] nss-dp 39c00000.dp1 lan: cannot get VSI ID for port 1
[ 34.898370] nss-dp 39c00000.dp1 lan: cannot get VSI ID for port 1
[ 34.904598] nss-dp 39c00000.dp1 lan: cannot get VSI ID for port 1
[ 34.910661] nss-dp 39c00000.dp1 lan: cannot get VSI ID for port 1
So let's apply a dependency on the NSS_DP_PPE_SUPPORT flag and contain
the patch code for ipq807x and ipq60xx within conditional directives.
Tested on: Linksys SPNMX56
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17966
Signed-off-by: Robert Marko <robimarko@gmail.com>
This vastly simplifies creating and managing unet networks.
It also adds support for the unetd protocol for onboarding new nodes
over the network.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This provides an easy to use modular CLI that can be used to interact with
OpenWrt services. It has full support for context sensitive tab completion
and help.
Extra modules can be provided by packages and can extend the existing node
structure in any place.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
It provides a ucode module with similar functionality as libreadline,
however with much smaller code and no dependencies aside from ucode and
libubox.
It also provides shell-style parsing/escaping code useful for building
a CLI.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
`$(( ))` will convert uninitialized variable to "0". If we want to
use "-n" to check the string length, it's necessary to make sure the
converted variable is not empty.
Fixes: 652a6677d5 ("base-files: Add new functions for ath11k caldata")
Fixes: https://github.com/openwrt/openwrt/issues/17818
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17892
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
It seems the that this was forgotten during initial adding of the
device in 0688cf5aeb
Thanks to
https://forum.openwrt.org/t/zyxel-gs1900-10hp-revision-b1-support-openwrt-firmware/131841/32
for putting me on the right track for this problem
Error that is being fixed - running fw_printenv results in:
"Warning: Bad CRC, using default environment"
and not showing boardmodel
Workaround, manually changing /etc/fw_env.config to
"/dev/mtd1 0x0 0x400 0x10000"
Signed-off-by: Klaas Demter <psychic-stool-cozy@duck.com>
Link: https://github.com/openwrt/openwrt/pull/17920
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Depending on the config / circumstances, the get_psk call can be called
multiple times from differnt places, which can lead to wrong sta->psk_idx
values. The correct call is the one that is also interested in the vlan_id,
so use the vlan_id pointer as indication of when to set sta->psk_idx.
Also fix off-by-one error for secondary PSKs
Fixes: b2a2c28617 ("hostapd: add support for authenticating with multiple PSKs via ubus helper")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The 00 address_mask needs to be inverted, otherwise the mac address
allocation will modify the last byte instead of the first one.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Backport FORESEE NAND chip support from upstream Linux. The newly
introduced FORESEE F35SQA001G was found on the Xiaomi AX3000T.
Signed-off-by: Erik Servili <serverror@serverror.com>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
The Xiaomi AX3000T has two hardware revisions. One uses MT7531
switch, and the other uses AN8855 switch. Set "mediatek,switch"
property to "auto" to be compatible with different switches.
Tested-by: Mikhail Zhilkin <csharper2005@gmail.com>
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Synchronize the latest MTK u-boot patches[1]. Some patches have
been amended since last synchronization.
Changes:
* Minor NMBM layer fixes and improvements.
* A new bootmenu shortkey implementation.
* New SPI flash support for en25qx128.
[1] https://github.com/mtk-openwrt/u-boot/tree/mtksoc-20230719
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Remove upstreamed patches:
010-menu-fix-the-logic-checking-whether-ESC-key-is-press.patch [1]
011-menu-add-support-to-check-if-menu-needs-to-be-reprin.patch [2]
012-bootmenu-add-reprint-check.patch [3]
Remove outdated patches:
455-arm-provide-noncached_set_region-prototype-to-fix-build.patch
Some patches have been manually rebased to match the upstream
changes. This patch also fixes the dtc warning for reserved-memory
dts node. If #address-cells and #size-cells are not same as the
root node definitions, the dtc will complain about it.
All defconfigs are refreshed by `make "$board"_defconfig` and
`make savedefconfig`.
[1] ddac69885e
[2] ccdd7948e2
[3] 599652cff1
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Do the same code simplification as was done for ipq807x to avoid code
duplication.
Link: https://github.com/openwrt/openwrt/pull/17907
Signed-off-by: Robert Marko <robimarko@gmail.com>
Unless another toolchain is present (or selected), build the bpf toolchain
whenever a package is selected that needs it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
9ff15f7ee3a0 devices: add device id for MediaTek MT7992E
94b3a3c1a6c4 devices: add device id for Qualcomm Atheros IPQ5018
9cec6b4dd2df devices: add device id for Qualcomm Atheros QCN6122
Link: https://github.com/openwrt/openwrt/pull/17878
Signed-off-by: Robert Marko <robimarko@gmail.com>
This downstream patch fixes a bug which could flood the logs with the
following message and would eventually lead to a crash.
ath11k c000000.wifi: failed to send HAL_REO_CMD_UPDATE_RX_QUEUE cmd, tid 0 (-105)
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for Linksys MX2000 (Atlas 6) and MX5500 (Atlas 6 Pro).
These devices are completely identical except for the secondary wifi
chip used for 5Ghz: QCN6102 is used on MX2000 while QCN9024 is used
on MX5500
Speficiations:
* SoC: Qualcomm IPQ5018 (64-bit dual-core ARM Cortex-A53 @ 1.0Ghz)
* Memory: Winbond W634GU6NB-11 (512 MiB DDR3-933)
* Serial Port: 3v3 TTL 115200n8
* Wi-Fi: IPQ5018 (2x2 2.4 Ghz 802.11b/g/n/ax)
* Wi-Fi: MX2000: QCN6102 (2x2:2 5 Ghz 802.11an/ac/ax)
MX5500: QCN9024 (4x4:4 5 Ghz 802.11an/ac/ax)
* Ethernet: IPQ5018 integrated virtual switch connected to an external
QCA8337 switch (4 Ports 10/100/1000 GBASE-T)
* Flash: Macronix MX35UF2GE4AD (256 MiB)
* LEDs: 1x multi-color PWM LED
* Buttons: 1x WPS (GPIO 27 Active Low)
1x Reset (GPIO 28 Acive Low)
Flash instructions (in case of MX2000, else replace with MX5500 images):
1. On OEM firmware, login to the device (typically at http://192.168.1.1) and click 'CA'
in the bottom right corner -> Connectivity -> Manual Upgrade. Alternatively, browse to
http://<router IP>/fwupdate.html.
Upgrade firmware using openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin image.
Optionally install on second partition, after first boot check actual partition:
fw_printenv -n boot_part
and install firmware on second partition using command in case of 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin kernel
and in case of 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin alt_kernel
2. Installation using serial connection from OEM firmware (default login: root, password: admin):
fw_printenv -n boot_part
In case of 2:
flash_erase /dev/mtd12 0 0
nandwrite -p /dev/mtd12 openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin
or in case of 1:
flash_erase /dev/mtd14 0 0
nandwrite -p /dev/mtd14 openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin
After first boot install firmware on second partition:
mtd -r -e kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin kernel
or:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq50xx-linksys_mx2000-squashfs-factory.bin alt_kernel
3. Back to the OEM firmware.
Download firmware from OEM website:
MX2000: https://support.linksys.com/kb/article/585-en/
MX5500: https://support.linksys.com/kb/article/587-en/
From serial or SSH:
fw_printenv boot_part
in case of 1:
mtd -r -e alt_kernel -n write FW_MX2000_1.1.7.210469_prod.img alt_kernel
else in case of 2:
mtd -r -e kernel -n write FW_MX2000_1.1.7.210469_prod.img kernel
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add QCN6122 platform support.
QCN6122 is a PCIe based solution that is attached to and enumerated
by the WPSS (Wireless Processor SubSystem) Q6 processor.
Though it is a PCIe device, since it is not attached to APSS processor
(Application Processor SubSystem), APSS will be unaware of such a decice
and hence it is registered to the APSS processor as a platform device(AHB).
Because of this hybrid nature, it is called as a hybrid bus device.
As such, QCN6122 is a hybrid bus type device and follows the same codepath
as for WCN6750.
This is a reversed engineered and heavily simplified version of below
downstream patch:
https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/ \
blob/NHSS.QSDK.12.4.5.r2/mac80211/patches/232-ath11k-qcn6122-support.patch
Co-developed-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Sowmiya Sree Elavalagan <ssreeela@codeaurora.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add ability to download and package ath11k firmware for QCN6122.
QCN6122 is specific/exclusive to the IPQ5018 platform and firmware
files are publishes in a subdirectory of the IPQ5018 firmware files.
While at it, add support for packaging BDFs for QCN6122 wifi and
update iwinfo to recognize QCN6122 wifi.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
IPQ5018 uses different BDF and caldb addresses for vairous boards,
so let's support reading these addresses from the device tree.
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add ability to download and package ath11k firmware for IPQ5018.
As part of commit 172ccf7, the source is pointed to the new QCA repo.
Until QCA publishes updated firmware for IPQ5018 and QCN6122, we need
to download the firmware from the old QUIC repo. As such, add a new
download routine for IPQ5018/QCN6122 to fetch the firmware files from
the old repo.
While at it, add support for packaging BDFs for IPQ5018-based boards
and update iwinfo to recognize IPQ5018 wifi.
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for the Qualcomm IPQ50xx in the QCA NSS dataplane driver.
The QCA implementation uses depracated DMA api calls and a downstream SCM
call, so convert to proper Linux DMA and SCM api calls.
In addition, add fixed-link support to support SGMII which is used to
connect the internal IPQ50xx switch to an external switch (ex. QCA8337)
Co-developed-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
The codename for IPQ50xx is Maple (abbreviated as 'MP'), so let's pass
the codename to allow the QCA-SSDK to build for the IPQ50xx SoC.
In addition, disable compiling the MP_PHY driver in favor of a native
driver being upstreamed.
Co-developed-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
Uses upstream DSA switch modules (rtl8365mb, rtl8366), similar to
RTL8367C and rtl8366rb swconfig drivers.
The package dependencies exclude targets built without kernel CONFIG_OF.
It also fixes the rtl8366rb LED support.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17182
Signed-off-by: Robert Marko <robimarko@gmail.com>
The three packages base-files, libc and kernel are special, the former
can't be upgraded in place since it's content are modified on startup,
the latter two are virtual packages only used as constraints for the
package manager.
Historically base-files was "locked" via a special OPKG function, the
latter two were hidden from the package index and thereby never picked
as possible upgrade.
Time moved forward and we now have APK and tools like OWUT. The latter
compares available packages with installed packages and generates user
readable output, requiring versions for libc and kernel, too. At the
same time, APK uses a different looking mechanism, which is set during
installation instead of part of the package metadata.
In short, this patch adds version constraints to the three packages,
allowing them to be part of the package index.
Fixes: #17774Fixes: #17775Fixes: efahl/owut#31
Signed-off-by: Paul Spooren <mail@aparcar.org>
This new value points to where firmware can be downloaded. It's not
about a single release but all available firmware releases.
In the next step, this URL should be exposed via `ubus call system
board` as an entry of the `distribution` field. With that value, the
running firmware can check for newer releases.
We already have VERSION_REPO however that's different and only meant for
package managers to download their fitting package indexes/packages.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Link: https://github.com/openwrt/openwrt/pull/17780
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Update URL variable to reflect switch to Github for development
The old URL returns HTTP 404
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/17752
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add new option to be able to perform upgrade on current partition for dual firmware devices:
"-s stay on current partition (for dual firmware devices)"
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14720
Signed-off-by: Robert Marko <robimarko@gmail.com>
The syntax error prevented the correct creation of all ipq60xx U-Boot environment files: /etc/config/ubootenv and /etc/fw_env.config
Signed-off-by: Ivan Deng <hongba@rocketmail.com>
Link: https://github.com/openwrt/openwrt/pull/17755
Signed-off-by: Robert Marko <robimarko@gmail.com>
322500403615 service: add default group @ to match all nodes
5f7860306200 ubus: rename unetd_ubus_notify to unetd_ubus_network_notify
d13752814651 enroll: add PEX sub-protocol to support enrolling new nodes into a network
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The USB PHY on the ar9330 and similar SoCs needs the PHY driver. In
OpenWrt 23.05 it was compiled into the kernel. The kernel 6.6
configuration does not compile it in any more, make the
kmod-usb-chipidea driver select it to add it to the images.
Fixes: https://github.com/openwrt/openwrt/issues/17710
Fixes: 04bdf9b332 ("ath79: disable ath79 USB phy drivers by default")
Link: https://github.com/openwrt/openwrt/pull/17720
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
atm_qos struct should be the same both for user and kernel spaces. Via
the __SO_ENCODE() macro it is used to define the SO_ATMQOS socket IOC.
During the VRX518 support introduction, the atm_trafprm sturct nested
into the atm_qos stucture was update with newer fields that are
referenced by the ATM TC layer of the VRX518 TC driver. These new fields
are intended to communicate information for extra traffic classes
supported by the driver. But we are still using vanilla kernel headers
to build the toolchain. Due to the atm.h header incoherency br2684ctl
from linux-atm tools is incapable to configure the ATM bridge netdev:
br2684ctl: Interface "dsl0" created sucessfully
br2684ctl: Communicating over ATM 0.1.2, encapsulation: LLC
br2684ctl: setsockopt SO_ATMQOS 22 <-- EINVAL errno
br2684ctl: Fatal: failed to connect on socket; File descriptor in bad state
There are two options to fix this incoherency. (a) update the header
file in the toolchain to build linux-atm against updated atm_trafprm and
atm_qos structures, or (b) revert atm_trafprm changes.
Since there are no actual users of the extra ATM QoS traffic classes,
just drop these extra traffic classes from vrx518_tc ATM TC layer and
drop the kernel patch updating atm.h.
Besides fixing the compatibility with linux-atm tools, removing the
kernel patch should simplify kernel updates removing unneeded burden of
maintenance.
Run tested with FRITZ!Box 7530 with disabled extra traffic classes and
then removed them entirely before the submission.
CC: John Crispin <john@phrozen.org>
Fixes: cfd42a0098 ("ipq40xx: add Intel/Lantiq ATM hacks")
Suggested-by: Andre Heider <a.heider@gmail.com>
Reported-and-tested-by: nebibigon93@yandex.ru
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-4-ryazanov.s.a@gmail.com/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
ATM TC layer have some issues which effectively prevent VRX518 from
being used as ADSL modem. Specifically, there one crash during the ATM
layer configuration and wrong PVC ID selection on packet receiving what
breaks RX path. Fix both of the issues. Make subif iface registration
optional to prevent the crash (see more details in the new patch) and
update the hardcoded PVC ID to match the first allocated channel.
Run tested with FRITZ!Box 7530.
Fixes: 474bbe23b7 ("kernel: add Intel/Lantiq VRX518 TC driver")
Reported-and-tested-by: nebibigon93@yandex.ru
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-3-ryazanov.s.a@gmail.com/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
It looks like VRX518 returns phys addr of data buffer in the 'data_ptr'
field of the RX descriptor and an actual data offset within the buffer
in the 'byte_off' field. In order to map the phys address back to
virtual we need the original phys address of the allocated buffer.
In the same driver applies offset to phys address before the mapping,
what leads to WARN_ON triggering in plat_mem_virt() function with
subsequent kernel panic:
WARNING: CPU: 0 PID: 0 at .../sw_plat.c:764 0xbf306cd0 [vrx518_tc@8af9f5d0+0x25000]
...
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = aff5701e
[00000000] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Noticed in ATM mode, when chip always returns byte_off = 4.
In order to fix the issue, pass the phys address to plat_mem_virt() as
is and apply byte_off later for proper DMA syncing and on mapped virtual
address when copying RXed data into the skb.
Run tested with FRITZ!Box 7530 on both ADSL and VDSL (thanks Jan) links.
Fixes: 474bbe23b7 ("kernel: add Intel/Lantiq VRX518 TC driver")
Tested-by: Jan Hoffmann <jan@3e8.eu> # VDSL link
Reported-and-tested-by: nebibigon93@yandex.ru # ADSL link
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250122222654.21833-2-ryazanov.s.a@gmail.com/
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
These symbols are needed to satisfy lxc dependencies.
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/17553
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
047b2efc1348 CMakeLists.txt: bump minimum cmake version
16ff0badbde7 CMakeLists: add support for including ABIVERSION in the library version number
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Increase PKG_RELEASE as follow-up for
("lantiq: fritz_cal_extract with reverse option for AVM FritzBox 7430").
Signed-off-by: Robert Marko <robimarko@gmail.com>
This implementation of fritz_cal_extract can also retrieve firmware
data stored in reverse byte order, as found in the AVM 7430 device.
This is done by intermediate storage in a buffer presumably large enough
to hold the complete data set. Currently, this buffer size is 128kB + 1kB
(some extra space for skipped data).
In the usual case of "forward" data, this implementation should behave
like the original implementation in all common cases. limit [-l] will
determine the amount of data read and size of buffer allocated.
However, if you are reading reversed data or didn't set a limit, the buffer
may be too small to hold all data. In this case, you can choose a higher
limit [-l] to enforce a sufficient buffer size.
Signed-off-by: Dustin Gathmann <dzsoftware@posteo.org>
Link: https://github.com/openwrt/openwrt/pull/15501
Signed-off-by: Robert Marko <robimarko@gmail.com>
Version 6.11 - October 8, 2024
* Feature: cmis: print active and inactive firmware versions
* Feature: flash transceiver module firmware (--flash-module-firmware)
* Feature: add T1BRR 10Mb/s mode to link mode tables
* Feature: support for disabling netlink from command line
* Fix: fix lanes parameter format specifier
* Fix: add missing clause 33 PSE manual description
* Fix: qsf: Better handling of Page A2h netlink read failure
* Fix: rss: retrieve ring count using ETHTOOL_GRXRINGS ioctl (-x)
* Misc: man page formatting fix
* changelog here: https://git.kernel.org/pub/scm/network/ethtool/ethtool.git/commit/NEWS?id=c0ea4b70c71334ef038f7a3416b228a50dada406
Tested on gl.inet MT6000, retrieve ring count is now working
Signed-off-by: Andrea Pesaresi <andreapesaresi82@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17607
Signed-off-by: Robert Marko <robimarko@gmail.com>
Update handling of macro __assign_str() to also support the one-argument
variant when building against kernel 6.10 or later. This is needed for
building the next LTS kernel 6.12.
Fixes: 384d079fd8 ("mac80211: update to version 6.11")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/17456
Signed-off-by: Robert Marko <robimarko@gmail.com>
The patch adding temperature sensor support for r8169 has been removed upstream
and the functionality will be added to Realtek PHY instead:
1f691a1fc4
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Some platforms a single ethernet device for all ports with multiple rx rings
and NAPI threading enabled. In this case, the steering script was limiting
performance by keeping all NAPI threads assigned to the same CPU.
Fix this by assigning each rx queue and the corresponding NAPI task separately.
Additionally, if the number of rx queues is at least as big as the number of
CPUs, skip weight based assignment and distribute the load across all CPUs
directly.
Fixes: https://github.com/openwrt/openwrt/issues/17611
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Envtools can automatically detect the number of blocks.
Signed-off-by: Paweł Owoc <frut3k7@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17463
Signed-off-by: Robert Marko <robimarko@gmail.com>
The lldp_class and lldp_location config option are only valid when
compiled with LLDP-MED support. If not they will cause lldpd not to
start.
Signed-off-by: Sebastian Pflieger <sebastian@pflieger.email>
Link: https://github.com/openwrt/openwrt/pull/17571
Signed-off-by: Robert Marko <robimarko@gmail.com>
It needs to be opt-in instead of opt-out, since there is no reliable way to
determine if the extra background radar chain has an antenna connected.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Change the double-include guard to avoid conflict with the linux kernel header
Reported-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Changes (breaking):
- Remove support for building 802.3bt TLVs (broken).
Fix:
- Fix memory leaks in EDP/FDP decoding when receiving some TLVs twice.
- Do not set interface description continuously.
- Use a different Netlink socket for changes and queries.
Signed-off-by: Sebastian Pflieger <sebastian@pflieger.email>
Link: https://github.com/openwrt/openwrt/pull/17570
Signed-off-by: Robert Marko <robimarko@gmail.com>
Without this patch, we get the following error:
Mon Dec 23 11:35:44 2024 daemon.err hostapd: nl80211: kernel reports: integer out of range
As updating hostapd would be too complex and requires further testing,
we backport this simple upstream fix instead.
Fixes: https://github.com/openwrt/openwrt/issues/16680
Signed-off-by: Rany Hany <rany_hany@riseup.net>
Link: https://github.com/openwrt/openwrt/pull/17590
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Update to latest version. There are no patches that need to be
refreshed.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
TP-Link EAP610-Outdoor is a 802.11ax AP claiming AX1800 support. It is
wall or pole mountable, and rated for outdoor use. It can only be
powered via PoE.
Specifications:
---------------
* CPU: Qualcomm IPQ6018 Quad core Cortex-A53
* RAM: 512 MB
* Storage: ESMT PSR1GA30DT 128MB NAND
* Ethernet:
* Gigabit RJ45 port with PoE input
* WLAN:
* 2.4GHz/5GHz
* LEDs:
* Multi-color System LED (Green/Amber)
* Buttons:
* 1x Reset
* UART: 4-pin unpopulated header
* 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V
Installation:
=============
Web UI method
-------------
Set up the device using the vendor's web UI. After that go to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
The connect to the machine via SSH:
ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
Disable signature verification:
cliclientd stopcs
Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
* Go to System -> Firmware Update.
* Under "New Firmware File", click "Browse" and select the image
* Select "Update" and confirm by clicking "OK".
If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWRT.
TFTP method
-----------
To flash via tftp, first place the initramfs image on the TFTP server.
setenv serverip <ip of tftp server>
setenv ipaddr <ip in same subnet as tftp server>
tftpboot tplink_eap610-outdoor-initramfs-uImage.itb
bootm
This should boot OpenWRT. Once booted, flash the sysupgrade.bin image
using either luci or the commandline.
The tplink2022 image format
============================
The vendor images of this device are packaged in a format that does
not match any previous tplink formats. In order for flashing to work
from the vendor's web UI, firmware updates need to be packaged in
this format. The `tplink-mkimage-2022.py` is provided for this
purpose.
This script can also analyze vendor images, and extract the required
"support" string. This string is checked by the vendor firmware, and
images with a missing or incorrect string are rejected.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14922
Signed-off-by: Robert Marko <robimarko@gmail.com>
This was the first DSA packaged, and the tagger was made into
a separate package. This is too complicated: the mv88e6xxx
is the only module using this tagger after all, fold the module
for the DSA hardware and the driver for the tagger into a
single package and let modprobe do its job of probing the
tagger for the driver.
Tested on the BMIPS Inteno XG6846.
Link: https://patchwork.ozlabs.org/project/openwrt/patch/20250110-mv88e6xxx-single-package-v1-1-223ad7fb312e@linaro.org/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Bringing up a mesh interface using wpa_supplicant already supports a
per-VIF basic rate selection. Add the same ability when creating a mesh
VIF without wpa_supplicant.
Signed-off-by: David Bauer <mail@david-bauer.net>
It is not required to specify the number of blocks as envtools are able
to autodetect it.
Link: https://github.com/openwrt/openwrt/pull/17504
Signed-off-by: Robert Marko <robimarko@gmail.com>
Basic rates were not set for mesh-interfaces, resulting in the undesired
behavior where 11s frames might be sent with a rate which was not
configured.
Depending on the driver, the basic rate might also be used to determine
the beacon rate configured to the chip. One such example are MediaTek
MT7915 platforms.
Signed-off-by: David Bauer <mail@david-bauer.net>
This is a minor upgrade that mainly fixes some compilation errors
and remove old unused code.
The Makefile has been reorganized. Now all package make parameters
are passed as configure arguments instead of environment variables.
The compilation dependencies remain the same as ppp v2.5.1 and the
package size changes are negligible.
Change log:
https://github.com/ppp-project/ppp/blob/v2.5.2/README#L70
Upstreamed patches:
101-pppd-crypto-fix-build-without-openssl.patch [1]
102-pppd-make-pid-directory-before-create-the-pid-file.patch [2]
103-pppd-crypto-fix-gcc-14-build.patch [3]
[1] 5f6eabdb66
[2] 734bc0438e
[3] ac269dbf7c
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17477
Signed-off-by: Nick Hainke <vincent@systemli.org>
This LED controller has a driver under development which is currently being reviewed by the respective kernel maintainers. They are currently on v11 which is included here.
The LED1202 is a 12-channel low quiescent current LED driver with:
* Supply range from 2.6 V to 5 V
* 20 mA current capability per channel
* 1.8 V compatible I2C control interface
* 8-bit analog dimming individual control
* 12-bit local PWM resolution
* 8 programmable patterns
If the led node is present in the controller then the channel is
set to active.
The output current can be adjusted separately for each channel by 8-bit
analog (current sink input) and 12-bit digital (PWM) dimming control. The
LED1202 implements 12 low-side current generators with independent dimming
control.
Internal volatile memory allows the user to store up to 8 different patterns,
each pattern is a particular output configuration in terms of PWM
duty-cycle (on 4096 steps). Analog dimming (on 256 steps) is per channel but
common to all patterns. Each device tree LED node will have a corresponding
entry in /sys/class/leds with the label name. The brightness property
corresponds to the per channel analog dimming, while the patterns[1-8] to the
PWM dimming control.
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/17451
Signed-off-by: Robert Marko <robimarko@gmail.com>
Spaces and tabs are widely used in variable definitions. We have to
remove them to ensure that get_mac_ascii() works properly.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The function get_mac_ascii() will fail when there are two or more
same MAC address variable names in the mtd partition. Only retain
the first variable to workaround this rare situation.
Fixes: https://github.com/openwrt/openwrt/issues/17236
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
The u-boot LED command "led_loop_done" is missing from the OpenWrt
One NAND flash u-boot. Copy it from the OpenWrt One NOR flash u-boot
default environment to fix this issue.
Fixes: https://github.com/openwrt/openwrt/issues/17310
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17338
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
It seems that the original patch has been manually modified. The
newly added line number is incorrect.
Fixes: c0581520b1 ("uboot-mediatek: add Routerich AX3000 support")
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Link: https://github.com/openwrt/openwrt/pull/17338
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
On some drivers, setting the tx power on the interface is not enough.
Set it for the phy as well.
Fixes: 04fb05914e ("wifi-scripts: add multi-radio config support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
35bcf68a6297 wifi: mt76: scan: fix setting tx_info fields
4d8d6e2e7710 wifi: mt76: scan: set vif offchannel link for scanning/roc
e354436db440 wifi: mt76: mt7996: use the correct vif link for scanning/roc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
7a3bcd39ae1f r8169: use helper r8169_mod_reg8_cond to simplify rtl_jumbo_config
e3e9e9039fa6 r8169: align WAKE_PHY handling with r8125/r8126 vendor drivers
330dc2297c82 r8169: improve rtl_set_d3_pll_down
c507e96b5763 r8169: improve __rtl8169_set_wol
83cb4b470c66 r8169: remove leftover locks after reverted change
2cd02f2fdd8a r8169: improve initialization of RSS registers on RTL8125/RTL8126
a3d8520e6a19 r8169: align RTL8126 EEE config with vendor driver
4af2f60bf737 r8169: align RTL8125/RTL8126 PHY config with vendor driver
eb90f876b796 r8169: align RTL8125 EEE config with vendor driver
b8bd8c44a266 r8169: fix inconsistent indenting in rtl8169_get_eth_mac_stats
f75d1fbe7809 r8169: add support for RTL8125D
c4e64095c00c r8169: enable EEE at 2.5G per default on RTL8125B
d64113c6bb5e r8169: remove rtl_dash_loop_wait_high/low
1c105bacb160 r8169: avoid duplicated messages if loading firmware fails and switch to warn level
ac48430368c1 r8169: don't take RTNL lock in rtl_task()
e3fc5139bd8f r8169: implement additional ethtool stats ops
b8bf38440ba9 r8169: enable SG/TSO on selected chip versions per default
854d71c555df r8169: remove original workaround for RTL8125 broken rx issue
1ffcc8d41306 r8169: add support for the temperature sensor being available from RTL8125B
The following patches require backporting additional linux patches:
e2015942e90a r8169: replace custom flag with disable_work() et al
e340bff27e63 r8169: copy vendor driver 2.5G/5G EEE advertisement constraints
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
d996988ae55b libubus: close file descriptor after sending it from a request
afa57cce0aff libubus: add support for using channels
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Just one of the devices uses the Marvell MV88E6060 DSA
switch so break this out from the generic kernel config
and into a package selected only by that single device
and probed at boot instead.
The big win is from being able to drop the dsa_core
(~600KB) kernel module out of the common kernel on
devices with no DSA switch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Check the return value of malloc and pread in case they fail.
Signed-off-by: Qiyuan Zhang <zhang.github@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/16070
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix a bug in linksys_bootcount.c that resetbc won't work on nand
with min I/O size> 2048.
Check the boot-log entry's intergrity with checksum.
Signed-off-by: Qiyuan Zhang <zhang.github@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/16070
Signed-off-by: Robert Marko <robimarko@gmail.com>
Missing limits.h. Upstream backport.
Add extra backports. Replace Alpine Linux patch with upstream one. Same
with patch 400.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/17426
Signed-off-by: Robert Marko <robimarko@gmail.com>
109114146f9c mt76: only enable tx worker after setting the channel
5fe42ec88fd1 mt76: mt7915: ensure that only one sta entry is active per mac address
1884f568ba02 wifi: mt76: do not add wcid entries to sta poll list during MCU reset
71fa9124d107 wifi: mt76: mt7996: fix NULL pointer dereference in mt7996_mcu_sta_bfer_he
eb85bb3fd5bf wifi: mt76: mt7915: fix eifs value on older chipsets
83e4d4a82e65 wifi: mt76: introduce mt792x_config_mac_addr_list routine
b47e20b440ae wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links
3e3c484726f3 wifi: mt76: mt7925: fix wrong band_idx setting when enable sniffer mode
3f1401a0f035 wifi: mt76: mt7925: fix get wrong chip cap from incorrect pointer
eede99f524e8 wifi: mt76: mt7925: fix the invalid ip address for arp offload
c99e4d51b340 wifi: mt76: mt7996: fix overflows seen when writing limit attributes
af983b2543ed wifi: mt76: mt7915: fix overflows seen when writing limit attributes
af494e2dcc94 wifi: mt76: mt7915: exclude tx backoff time from airtime
6f6a1f7cb381 wifi: mt76: mt7996: exclude tx backoff time from airtime
7f65b1b28b4c wifi: mt76: connac: Extend mt76_connac_mcu_uni_add_dev for MLO
1b5e6abc2e7a wifi: mt76: mt7925: Fix incorrect MLD address in bss_mld_tlv for MLO support
72b4688b3912 wifi: mt76: mt7925: Fix incorrect WCID assignment for MLO
6bd2c044e67a wifi: mt76: mt7925: Fix incorrect WCID phy_idx assignment
1c04e9693466 wifi: mt76: mt7925: fix wrong parameter for related cmd of chan info
01e02947bdbf wifi: mt76: mt7925: Fix CNM Timeout with Single Active Link in MLO
b90b1a1dc71b wifi: mt76: mt7925: Enhance mt7925_mac_link_bss_add to support MLO
53ec7a551f17 wifi: mt76: Enhance mt7925_mac_link_sta_add to support MLO
3c99ef40e0e7 wifi: mt76: mt7925: Update mt7925_mcu_sta_update for BC in ASSOC state
285efc6afaec wifi: mt76: mt7925: Update mt792x_rx_get_wcid for per-link STA
e5c0d1289e6c wifi: mt76: mt7925: Update mt7925_unassign_vif_chanctx for per-link BSS
67dcd5c888c4 wifi: mt76: mt7925: Update secondary link PS flow
fd4d6f87072f wifi: mt76: mt7925: Init secondary link PM state
6d972b5b9d6a wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO
3acc6cbb9556 wifi: mt76: mt7925: Cleanup MLO settings post-disconnection
0aab0c61ce92 wifi: mt76: mt7925: Properly handle responses for commands with events
15bead1b0041 wifi: mt76: do not hold queue lock during initial rx buffer alloc
732044a949d5 wifi: mt76: mt7925: config the dwell time by firmware
9ba311ec6afa wifi: mt76: mt7921: introduce CSA support
5d12c7404c22 wifi: mt76: mt7921: add rfkill_poll for hardware rfkill
ef965d408b79 wifi: mt76: mt7925: replace zero-length array with flexible-array member
f8563589c72d wifi: mt76: mt7921u: Add VID/PID for TP-Link TXE50UH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
They show up as null entries in the nl80211 wiphy dump.
Fixes the following error:
Reference error: left-hand side expression is null
In find_phy(), file /usr/share/ucode/iwinfo.uc, line 19, byte 11:
called from function get_max_power (/usr/share/ucode/iwinfo.uc:42:32)
called from function module (/usr/share/ucode/iwinfo.uc:102:39)
called from anonymous function (/usr/bin/iwinfo:5:25)
` if (phy.wiphy == wiphy)`
Near here ------^
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When doing LTO builds, the target related CFLAGS need to be passed to the
linker, so that they are considered for target code generation.
Pass TARGET_CFLAGS in EXTRA_LDFLAGS to ensure that this is handled properly.
Fixes: #17200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Update to the latest upstream release to include recent improvements and
bugfixes, and simplify use of PKG_SOURCE_VERSION.
This version supports BPF objects of either endianness, allowing for
introspection, linking and skeleton creation, and enables cross-compiling
modern BPF applications for targets with non-native byteorder.
Link: https://github.com/libbpf/bpftool/releases/tag/v7.5.0
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Link: https://github.com/openwrt/openwrt/pull/17404
Signed-off-by: Nick Hainke <vincent@systemli.org>
Add support for saving list of installed packages for APK in the same way
we do it for OPKG.
Unlike OPKG, we dont generate .control files for packages so lets use .list
files instead.
Fixes: #16947
Link: https://github.com/openwrt/openwrt/pull/17123
Signed-off-by: Robert Marko <robimarko@gmail.com>
Simplify patch with gpiochip_add_data, struct reduction, new GPIO API,
and header cleanup.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16635
Signed-off-by: Robert Marko <robimarko@gmail.com>
These only work with and are useful with mach files. Now that those are
gone, this can go too.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16635
Signed-off-by: Robert Marko <robimarko@gmail.com>
This goes away in kernel 6.12 upstream.
Get ahead of the curve by fixing all the local patches as well.
Get rid of CONFIG_OF. It's needed now.
Refreshed all patches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16635
Signed-off-by: Robert Marko <robimarko@gmail.com>
Fix bogus reference to kmod-nf-conntrack-timeout, fixing the warning
`WARNING: Makefile 'package/kernel/linux/Makefile' has a dependency on
'kmod-nf-conntrack-timeout', which does not exist`.
Fixes: 0e2dcfc4f4 ("netfilter: add kmod-nfnetlink-ct{helper,timeout}")
Signed-off-by: Joel Low <joel@joelsplace.sg>
Link: https://github.com/openwrt/openwrt/pull/17388
Signed-off-by: Robert Marko <robimarko@gmail.com>
