catspeed-cc/openwrt
1
1
Fork 0
Code
This repository is for TEW-829DRU OpenWRT development purposes only.
68,893 Commits 2 Branches 0 Tags 295 MiB
C 64.8%
Makefile 20.8%
Shell 7.3%
Perl 2.4%
UnrealScript 1.9%
Other 2.6%
12d41dce06
Go to file
Sven Eckelmann 12d41dce06 realtek: rtl930x: psx8: specify RTL8224 reset GPIO 
The nRESET pins of the RTL8224 PHYs on the PSX8/PSX10 are wired to GPIO6
(lan1-4) + GPIO10 (lan5-8) of the SoC, but this was never described in the
devicetree.

GPIO 6 is the global reset shared by (logical) PHYs 0-3 on MDIO bus0. GPIO
10 is the global reset shared by (logical) PHYs 8-11 on mdio bus0. It is
intentionally not declared as reset-gpios on any bus: the MDIO driver /
phylink only support a single reset GPIO per bus, not two (or more). And a
GPIO can only be used as reset-gpio on a single PHY. Attaching it to a
single PHY would still reset the other PHYs on the same chip as a side
effect, leaving their software state out of sync with the hardware and
likely breaking them.

Signed-off-by: Sven Eckelmann <se@simonwunderlich.de>
Link: https://github.com/openwrt/openwrt/pull/23297
Signed-off-by: Robert Marko <robimarko@gmail.com>
2026-05-13 11:34:34 +02:00
.devcontainer/ci-env devcontainer: Add development environment for gihub codespace 2023-10-30 23:34:26 +01:00
.github github: separate concurrency group per event for kernel and packages 2026-05-11 15:36:58 +02:00
.vscode meta: VS Code: add "Git: Always Sign Off" setting 2024-10-03 17:18:51 +02:00
config treewide: remove unused archs leftovers 2026-05-07 10:58:47 +02:00
include kernel: fix lz4 initramfs creation 2026-05-07 18:14:58 +02:00
LICENSES LICENSES: include all used licenses in LICENSES directory 2021-02-14 19:21:38 +01:00
package dnsmasq: apply six CVE-fix upstream patches to 2.92 2026-05-13 01:51:56 +02:00
scripts scripts: add git_commit to profiles.json 2026-04-21 19:47:58 +08:00
target realtek: rtl930x: psx8: specify RTL8224 reset GPIO 2026-05-13 11:34:34 +02:00
toolchain toolchain: musl: backport patches with CVE fixes 2026-05-13 01:59:29 +02:00
tools firmware-utils: update to Git HEAD (2026-05-04) 2026-05-05 14:10:39 +02:00
.gitattributes gitattributes: automatically convert dts file CRLF line endings to LF 2025-11-29 17:52:35 +01:00
.gitignore gitignore: ignore local APK keys 2024-05-17 22:03:06 +03:00
BSDmakefile
Config.in build: scripts/config - update to kconfig-v5.14 2022-02-19 13:10:01 +01:00
COPYING COPYING: add COPYING file to specify project licenses 2021-02-14 19:21:38 +01:00
feeds.conf.default feeds: revert to git.openwrt.org 2026-01-09 21:55:00 +01:00
Makefile build: include tests/Makefile if available 2024-06-17 17:51:31 +02:00
README.md README: replace "MacOSX" with "macOS" 2024-04-01 18:46:30 +02:00
rules.mk build: do not set CCACHE_COMPILERCHECK 2026-04-22 23:57:01 +02:00

README.md

OpenWrt logo

OpenWrt Project is a Linux operating system targeting embedded devices. Instead of trying to create a single, static firmware, OpenWrt provides a fully writable filesystem with package management. This frees you from the application selection and configuration provided by the vendor and allows you to customize the device through the use of packages to suit any application. For developers, OpenWrt is the framework to build an application without having to build a complete firmware around it; for users this means the ability for full customization, to use the device in ways never envisioned.

Sunshine!

Download

Built firmware images are available for many architectures and come with a package selection to be used as WiFi home router. To quickly find a factory image usable to migrate from a vendor stock firmware to OpenWrt, try the Firmware Selector.

If your device is supported, please follow the Info link to see install instructions or consult the support resources listed below.

An advanced user may require additional or specific package. (Toolchain, SDK, ...) For everything else than simple firmware download, try the wiki download page:

Development

To build your own firmware you need a GNU/Linux, BSD or macOS system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system.

Requirements

You need the following tools to compile OpenWrt, the package names vary between distributions. A complete list with distribution specific packages is found in the Build System Setup documentation.

binutils bzip2 diff find flex gawk gcc-6+ getopt grep install libc-dev libz-dev
make4.1+ perl python3.7+ rsync subversion unzip which

Quickstart

  1. Run ./scripts/feeds update -a to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default

  2. Run ./scripts/feeds install -a to install symlinks for all obtained packages into package/feeds/

  3. Run make menuconfig to select your preferred configuration for the toolchain, target system & firmware packages.

  4. Run make to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the GNU/Linux kernel & all chosen applications for your target system.

Related Repositories

The main repository uses multiple sub-repositories to manage packages of different categories. All packages are installed via the OpenWrt package manager called opkg. If you're looking to develop the web interface or port packages to OpenWrt, please find the fitting repository below.

  • LuCI Web Interface: Modern and modular interface to control the device via a web browser.

  • OpenWrt Packages: Community repository of ported packages.

  • OpenWrt Routing: Packages specifically focused on (mesh) routing.

  • OpenWrt Video: Packages specifically focused on display servers and clients (Xorg and Wayland).

Support Information

For a list of supported devices see the OpenWrt Hardware Database

Documentation

Support Community

  • Forum: For usage, projects, discussions and hardware advise.
  • Support Chat: Channel #openwrt on oftc.net.

Developer Community

License

OpenWrt is licensed under GPL-2.0