43562f97e7
A SerDes can host multiple PCS links: QSGMII binds four ports to one SerDes, USXGMII variants up to eight. Today pcs-handle references the SerDes as a whole, with no way to express which link inside the SerDes a port wants. The driver gets away with this because it carries its own port->link bookkeeping and the link slot is implicit in DSA's port iteration order -- functional, but the wiring information lives nowhere in DT. The upcoming fwnode_pcs migration moves PCS lookup to the generic fwnode provider API, which disambiguates multiple instances per fwnode via phandle cells. To make that landable as small, code-only commits, the DT needs to carry the link index ahead of time. Bump #pcs-cells from 0 to 1 on every SerDes node in the four SoC DTSIs and append the link cell to every pcs-handle reference across boards and the SWITCH_PORT_* macros. Cell values match the existing wiring: 0 for single-link SerDes (10GBase-R, SGMII, fiber, single-link USXGMII), 0..3 per SerDes for QSGMII and USXGMII-QX, 0..7 for the RTL9311 octal USXGMII layout. No code reads the new cell yet -- of_parse_phandle_with_args() in the PCS driver already cooperates with cells = 0 or 1, and the DSA glue uses of_parse_phandle() which ignores cells entirely. The change is runtime-neutral on its own; it exists so the follow-up code patches can be a few lines each instead of dragging a bridge counter into the driver to invent slot numbers DT could have provided directly. Link: https://github.com/openwrt/openwrt/pull/23539 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
77 lines
1.6 KiB
Plaintext
77 lines
1.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "rtl838x.dtsi"
|
|
#include "rtl83xx_d-link_dgs-1210_common.dtsi"
|
|
#include "rtl83xx_d-link_dgs-1210_gpio.dtsi"
|
|
|
|
/ {
|
|
compatible = "d-link,dgs-1210-16", "realtek,rtl838x-soc";
|
|
model = "D-Link DGS-1210-16";
|
|
};
|
|
|
|
&mdio_bus0 {
|
|
PHY_C22(0, 0)
|
|
PHY_C22(1, 1)
|
|
PHY_C22(2, 2)
|
|
PHY_C22(3, 3)
|
|
PHY_C22(4, 4)
|
|
PHY_C22(5, 5)
|
|
PHY_C22(6, 6)
|
|
PHY_C22(7, 7)
|
|
|
|
PHY_C22(8, 8)
|
|
PHY_C22(9, 9)
|
|
PHY_C22(10, 10)
|
|
PHY_C22(11, 11)
|
|
PHY_C22(12, 12)
|
|
PHY_C22(13, 13)
|
|
PHY_C22(14, 14)
|
|
PHY_C22(15, 15)
|
|
|
|
/* TODO: This is a RTL8214FC and should be PHY_C22_SFP() */
|
|
PHY_C22(24, 24)
|
|
PHY_C22(25, 25)
|
|
PHY_C22(26, 26)
|
|
PHY_C22(27, 27)
|
|
};
|
|
|
|
&switch0 {
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
SWITCH_PORT_SDS(0, 1, 0, 0, qsgmii)
|
|
SWITCH_PORT_SDS(1, 2, 0, 1, qsgmii)
|
|
SWITCH_PORT_SDS(2, 3, 0, 2, qsgmii)
|
|
SWITCH_PORT_SDS(3, 4, 0, 3, qsgmii)
|
|
SWITCH_PORT_SDS(4, 5, 1, 0, qsgmii)
|
|
SWITCH_PORT_SDS(5, 6, 1, 1, qsgmii)
|
|
SWITCH_PORT_SDS(6, 7, 1, 2, qsgmii)
|
|
SWITCH_PORT_SDS(7, 8, 1, 3, qsgmii)
|
|
|
|
SWITCH_PORT(8, 9, internal)
|
|
SWITCH_PORT(9, 10, internal)
|
|
SWITCH_PORT(10, 11, internal)
|
|
SWITCH_PORT(11, 12, internal)
|
|
SWITCH_PORT(12, 13, internal)
|
|
SWITCH_PORT(13, 14, internal)
|
|
SWITCH_PORT(14, 15, internal)
|
|
SWITCH_PORT(15, 16, internal)
|
|
|
|
SWITCH_PORT_SDS(24, 17, 4, 0, qsgmii)
|
|
SWITCH_PORT_SDS(25, 18, 4, 1, qsgmii)
|
|
SWITCH_PORT_SDS(26, 19, 4, 2, qsgmii)
|
|
SWITCH_PORT_SDS(27, 20, 4, 3, qsgmii)
|
|
|
|
port@28 {
|
|
ethernet = <ðernet0>;
|
|
reg = <28>;
|
|
phy-mode = "internal";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|