43562f97e7
A SerDes can host multiple PCS links: QSGMII binds four ports to one SerDes, USXGMII variants up to eight. Today pcs-handle references the SerDes as a whole, with no way to express which link inside the SerDes a port wants. The driver gets away with this because it carries its own port->link bookkeeping and the link slot is implicit in DSA's port iteration order -- functional, but the wiring information lives nowhere in DT. The upcoming fwnode_pcs migration moves PCS lookup to the generic fwnode provider API, which disambiguates multiple instances per fwnode via phandle cells. To make that landable as small, code-only commits, the DT needs to carry the link index ahead of time. Bump #pcs-cells from 0 to 1 on every SerDes node in the four SoC DTSIs and append the link cell to every pcs-handle reference across boards and the SWITCH_PORT_* macros. Cell values match the existing wiring: 0 for single-link SerDes (10GBase-R, SGMII, fiber, single-link USXGMII), 0..3 per SerDes for QSGMII and USXGMII-QX, 0..7 for the RTL9311 octal USXGMII layout. No code reads the new cell yet -- of_parse_phandle_with_args() in the PCS driver already cooperates with cells = 0 or 1, and the DSA glue uses of_parse_phandle() which ignores cells entirely. The change is runtime-neutral on its own; it exists so the follow-up code patches can be a few lines each instead of dragging a bridge counter into the driver to invent slot numbers DT could have provided directly. Link: https://github.com/openwrt/openwrt/pull/23539 Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
197 lines
3.6 KiB
Plaintext
197 lines
3.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "rtl838x.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "iodata,bsh-g24mb", "realtek,rtl838x-soc";
|
|
model = "I-O DATA BSH-G24MB";
|
|
|
|
aliases {
|
|
led-boot = &led_sys_loop;
|
|
led-failsafe = &led_sys_loop;
|
|
led-upgrade = &led_sys_loop;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
leds {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinmux_disable_sys_led>;
|
|
compatible = "gpio-leds";
|
|
|
|
led_sys_loop: led {
|
|
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_STATUS;
|
|
};
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <20>;
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio_aux {
|
|
status = "okay";
|
|
|
|
gpio1: expander@0 {
|
|
compatible = "realtek,rtl8231";
|
|
reg = <0>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&gpio1 0 0 37>;
|
|
|
|
led-controller {
|
|
compatible = "realtek,rtl8231-leds";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@80000 {
|
|
label = "u-boot-env";
|
|
reg = <0x80000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@90000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x90000 0x10000>;
|
|
};
|
|
|
|
partition@a0000 {
|
|
label = "jffs2_cfg";
|
|
reg = <0xa0000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1a0000 {
|
|
label = "jffs2_log";
|
|
reg = <0x1a0000 0x100000>;
|
|
read-only;
|
|
};
|
|
|
|
/*
|
|
* use 2x OS partitions in OpenWrt
|
|
*
|
|
* 0x2A0000-0x94FFFF: RUNTIME
|
|
* 0x950000-0xFFFFFF: RUNTIME2 (not used in stock)
|
|
*/
|
|
partition@2a0000 {
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x2a0000 0xd60000>;
|
|
openwrt,ih-magic = <0x83800013>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio_bus0 {
|
|
PHY_C22(0, 0)
|
|
PHY_C22(1, 1)
|
|
PHY_C22(2, 2)
|
|
PHY_C22(3, 3)
|
|
PHY_C22(4, 4)
|
|
PHY_C22(5, 5)
|
|
PHY_C22(6, 6)
|
|
PHY_C22(7, 7)
|
|
|
|
PHY_C22(8, 8)
|
|
PHY_C22(9, 9)
|
|
PHY_C22(10, 10)
|
|
PHY_C22(11, 11)
|
|
PHY_C22(12, 12)
|
|
PHY_C22(13, 13)
|
|
PHY_C22(14, 14)
|
|
PHY_C22(15, 15)
|
|
|
|
PHY_C22(16, 16)
|
|
PHY_C22(17, 17)
|
|
PHY_C22(18, 18)
|
|
PHY_C22(19, 19)
|
|
PHY_C22(20, 20)
|
|
PHY_C22(21, 21)
|
|
PHY_C22(22, 22)
|
|
PHY_C22(23, 23)
|
|
};
|
|
|
|
&switch0 {
|
|
ethernet-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
SWITCH_PORT_SDS(0, 1, 0, 0, qsgmii)
|
|
SWITCH_PORT_SDS(1, 2, 0, 1, qsgmii)
|
|
SWITCH_PORT_SDS(2, 3, 0, 2, qsgmii)
|
|
SWITCH_PORT_SDS(3, 4, 0, 3, qsgmii)
|
|
SWITCH_PORT_SDS(4, 5, 1, 0, qsgmii)
|
|
SWITCH_PORT_SDS(5, 6, 1, 1, qsgmii)
|
|
SWITCH_PORT_SDS(6, 7, 1, 2, qsgmii)
|
|
SWITCH_PORT_SDS(7, 8, 1, 3, qsgmii)
|
|
|
|
SWITCH_PORT(8, 9, internal)
|
|
SWITCH_PORT(9, 10, internal)
|
|
SWITCH_PORT(10, 11, internal)
|
|
SWITCH_PORT(11, 12, internal)
|
|
SWITCH_PORT(12, 13, internal)
|
|
SWITCH_PORT(13, 14, internal)
|
|
SWITCH_PORT(14, 15, internal)
|
|
SWITCH_PORT(15, 16, internal)
|
|
|
|
SWITCH_PORT_SDS(16, 17, 2, 0, qsgmii)
|
|
SWITCH_PORT_SDS(17, 18, 2, 1, qsgmii)
|
|
SWITCH_PORT_SDS(18, 19, 2, 2, qsgmii)
|
|
SWITCH_PORT_SDS(19, 20, 2, 3, qsgmii)
|
|
SWITCH_PORT_SDS(20, 21, 3, 0, qsgmii)
|
|
SWITCH_PORT_SDS(21, 22, 3, 1, qsgmii)
|
|
SWITCH_PORT_SDS(22, 23, 3, 2, qsgmii)
|
|
SWITCH_PORT_SDS(23, 24, 3, 3, qsgmii)
|
|
|
|
port@28 {
|
|
ethernet = <ðernet0>;
|
|
reg = <28>;
|
|
phy-mode = "internal";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|