catspeed-cc/openwrt
2
1
Fork 0
Code Issues Pull Requests Activity
6a3db77f2b
openwrt/target/linux/realtek/dts
History
Jonas Jelonek bdddc753c5 realtek: add support for Zyxel XMG1915-10EP 
Specifications
==============

- SoC: RTL9302C
- Flash: 32 MiB SPI NOR flash
- RAM: 256 MiB
- Ethernet: 8x 10/100/1000/2500 Mbps (RTL8224)
- PoE: 802.3 af/at/bt on 8x RJ45 ports
    - 60W per port, 130W total budget
- SFP: 2x SFP+ cages
- UART: 1x 4 pins serial header, 115200 bauds, 8n1, 3.3v logic levels,
        pinout: unused (top), TX, RX, GND (bottom)
- Buttons: 1x "Restore" button, 1x "LED mode" button

MAC address
===========

Single MAC address derived from board partition with vendor-specific
format. MAC address is 70:49:a2:xx:xx:xx and applied to all switch
ports.

PoE
===

PoE is supported by realtek-poe package. To make it work, additional
options in the realtek-poe configuration file /etc/config/poe must be
set:

    config globals
            option force_baudrate '115200'
	    option force_dialect 'realtek'

Disclaimer
==========

Flashing OpenWrt will overwrite BootExtension + ZyNOS. BootExtension
functionality is not available anymore then. The U-boot/Bootbase still
has some limited functionality which can be used in emergency cases.

Installation
============

Simple web upgrade:

1. Take the OpenWrt factory.bin image generated by the build.

2. In the ZyNOS web UI, login and go to Maintenance -> Firmware Upgrade.

3. Under "Boot Image", make sure the Config Boot Image is set to 1. In
   other words, make sure the switch booted from firmware image 1 or it
   will do so on next reboot.
   This is crucial, otherwise OpenWrt cannot boot.

4. Below, select and upload the factory.bin image. After clicking
   upgrade, the image will be flashed.

5. After flashing has finished, reboot the switch. It will now boot into
   OpenWrt.

U-Boot
======

This device ships with U-boot masked as Bootbase. After the device is
powered, a DRAM test is performed. Spamming $ during that test will drop
you into a shell after test finished. You'll have a limited command set
at first.

Unlocking the shell with [1] or [2] will give you a normal U-boot
command set. From here, you can perform initramfs boot or recovery.

Initramfs boot:
> loady 0x82000000 + go 0x82000000

Recovery:
> upgradeY image2 0x82000000 115200

Return to stock firmware
========================

1. Download the firmware for the switch from Zyxel website.

2. Unzip the download, there should be a .bin file with a alphanumeric
   name.

3. Upload this file to running OpenWrt.

4. Run (use -F since the image doesn't have image metadata):

   > sysupgrade -F <stock-firmware>.bin

5. Wait for the sysupgrade to succeed and the switch reboot. At the next
   boot, ZyNOS should come up again.

Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/23218
Signed-off-by: Robert Marko <robimarko@gmail.com>
2026-05-11 10:34:53 +02:00
..
macros.dtsi realtek: support configurable LED interface mode on RTL930x 2026-05-03 01:32:52 +02:00
rtl83xx_d-link_dgs-1210_common.dtsi realtek: Drop unused property on DGS-1210 gpio0 2025-01-28 07:30:32 +01:00
rtl83xx_d-link_dgs-1210_gpio_sfp.dtsi
rtl83xx_d-link_dgs-1210_gpio.dtsi realtek: switch RTL8231 driver for D-Link DGS-1210 2025-01-28 07:30:33 +01:00
rtl83xx_hpe_1920.dtsi realtek: switch HPE 1920 series to NVMEM 2026-02-13 12:06:20 +01:00
rtl83xx_panasonic_mxxeg-pn28xx0k.dtsi
rtl93xx_linksys_lgs3xxc_nand_common.dtsi realtek: dts: convert LGS3xxC to NVMEM 2026-03-14 10:50:47 +01:00
rtl838x.dtsi realtek: dts: relocate/retype switch node 2026-03-21 22:26:02 +01:00
rtl839x_zyxel_gs1920-24hp-common.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl839x.dtsi realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl930x.dtsi realtek: dts: rtl930x: add pinctrl and pinmux for UART1 2026-05-11 10:34:53 +02:00
rtl931x.dtsi realtek: fix pinmux comment in rtl931x.dtsi 2026-04-12 18:23:08 +02:00
rtl8380_d-link_dgs-1210-10mp-f.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_datto_l8.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_engenius_ews2910p-v1.dts realtek: engenius_ews2910p: support multiple hardware versions 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p-v3.dts realtek: support EnGenius EWS2910P v3 2025-05-31 23:19:01 +02:00
rtl8380_engenius_ews2910p.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_hpe_1920-8g-poe-65w.dts
rtl8380_hpe_1920-8g-poe-180w.dts realtek: HPE 1920 8G PoE+ 180W move fans to hwmon 2025-01-15 08:21:08 +01:00
rtl8380_hpe_1920-8g.dts
rtl8380_hpe_1920-8g.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_linksys_lgs310c.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_netgear_gigabit.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_netgear_gs108t-v3.dts
rtl8380_netgear_gs110tpp-v1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8380_netgear_gs110tup-v1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8380_netgear_gs308t-v1.dts
rtl8380_netgear_gs310tp-v1.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_panasonic_m8eg-pn28080k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_tplink_sg2xxx.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8380_tplink_sg2008p-v1.dts realtek: rtl838x: drop SFP pseudo-PHYs and phy-handle 2025-12-09 00:28:41 +01:00
rtl8380_tplink_sg2210p-v3.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_zyxel_gs1900_gpio_emulated.dtsi realtek: rtl838x: drop GS1900 MDIO reset GPIO 2026-02-24 21:29:26 +01:00
rtl8380_zyxel_gs1900_gpio.dtsi realtek: rtl838x: drop GS1900 MDIO reset GPIO 2026-02-24 21:29:26 +01:00
rtl8380_zyxel_gs1900-8-a1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8-b1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8hp-a1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-8hp-b1.dts realtek: rtl838x: rename GS1900 series v1/v2 to A1/B1 2025-09-24 13:41:04 +02:00
rtl8380_zyxel_gs1900-10hp-a1.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8380_zyxel_gs1900.dtsi realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_allnet_all-sg8208m.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_apresia_aplgs120gtss.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-10p.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_d-link_dgs-1210-16.dts realtek: dts: drop EXTERNAL_SFP_PHY macro 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-20.dts realtek: dts: drop EXTERNAL_SFP_PHY macro 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-26.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_d-link_dgs-1210-28_common.dtsi realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_d-link_dgs-1210-28.dts
rtl8382_d-link_dgs-1210-28mp-f.dts realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_d-link_dgs-1210-28p_common.dtsi realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_d-link_dgs-1210-28p-f.dts realtek: d-link: add support for dgs-1210-28p-f 2024-09-24 20:59:50 +02:00
rtl8382_hpe_1920-16g.dts realtek: dts: replace ports by ethernet-ports 2026-03-01 14:19:36 +01:00
rtl8382_hpe_1920-24g-poe-180w.dts realtek: HPE 1920 24G PoE+ 180W/370W move fans to hwmon 2025-01-16 07:32:16 +01:00
rtl8382_hpe_1920-24g-poe-370w.dts realtek: HPE 1920 24G PoE+ 180W/370W move fans to hwmon 2025-01-16 07:32:16 +01:00
rtl8382_hpe_1920-24g.dts realtek: rtl838x: refactor hpe_1920-24g dts 2024-12-31 08:29:56 +01:00
rtl8382_hpe_1920-24g.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_hpe_1920.dtsi realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8382_inaba_aml2-17gp.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_iodata_bsh-g24mb.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_panasonic_m16eg-pn28160k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_panasonic_m24eg-pn28240k.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_tplink_t1600g-28ts-v3.dts realtek: drop INTERNAL_PHY() macro 2026-04-13 18:42:33 +02:00
rtl8382_zyxel_gs1900-16-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24-a1.dts realtek: use common dtsi for Zyxel GS1900-24 2026-01-27 01:34:21 +01:00
rtl8382_zyxel_gs1900-24-b1.dts realtek: add Zyxel GS1900-24 B1 device definition 2026-01-27 01:34:21 +01:00
rtl8382_zyxel_gs1900-24.dtsi realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24e-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24ep-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24hp-a1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8382_zyxel_gs1900-24hp-b1.dts realtek: dts: convert EXTERNAL_PHY() to PHY_C22() 2026-03-31 12:56:24 +02:00
rtl8391_zyxel_gs1920-24hp-v2.dts realtek: dts: convert EXTERNAL_SFP_PHY_FULL to PHY_C22_SFP 2026-04-22 16:58:04 +02:00
rtl8392_zyxel_gs1920-24hp-v1.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_d-link_dgs-1210-52.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_edgecore_ecs4100-12ph.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_hpe_1920-48g-poe.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_hpe_1920-48g.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_hpe_1920.dtsi realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_netgear_gs750e.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_panasonic_m48eg-pn28480k.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_tplink_sg2452p-v4.dts realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_zyxel_gs1900-48-a1.dts realtek: extract shared GS1900-48 dtsi 2026-04-11 19:32:57 +02:00
rtl8393_zyxel_gs1900-48.dtsi realtek: dts: adapt RTL839x mdio bus topology 2026-05-06 10:52:40 +02:00
rtl8393_zyxel_gs1900-48hp-a1.dts realtek: add Zyxel GS1900-48HP A1 support 2026-04-11 19:35:53 +02:00
rtl9301_d-link_dgs-1250-28x.dts realtek: hwmon: backport lm75 alert polarity patches 2026-05-06 10:51:32 +02:00
rtl9301_linksys_lgs328c.dts realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9302_plasmacloud_common.dtsi realtek: Fix pair-order for rtl930x based plasmacloud devices 2026-04-11 12:17:30 +02:00
rtl9302_plasmacloud_mcx3.dts realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9302_plasmacloud_psx8.dts realtek: rtl930x: Add support for Plasma Cloud PSX8 Switch 2025-08-28 21:07:57 +02:00
rtl9302_plasmacloud_psx10.dts realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9302_xikestor_sks8300-12e2t2x.dts realtek: dts: rtl93xx: use macro for PHY port definitions 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xgs1x10-12-common.dtsi realtek: dts: rtl93xx: use PHY_* macros for Zyxel XGS1X10/1250 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xgs1010-12-a1.dts realtek: dts: rtl93xx: use PHY_* macros for Zyxel XGS1X10/1250 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xgs1210-12-a1.dts realtek: dts: rtl93xx: use PHY_* macros for Zyxel XGS1X10/1250 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xgs1210-12-b1.dts realtek: dts: rtl93xx: use PHY_* macros for Zyxel XGS1X10/1250 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xgs1210-12-common.dtsi realtek: switch Zyxel XGS1210 to NVMEM 2026-02-15 12:02:38 +01:00
rtl9302_zyxel_xgs1250-12-a1.dts realtek: force in-band autoneg on XGS1250-12 A1 10G PHYs 2026-03-31 12:54:57 +02:00
rtl9302_zyxel_xgs1250-12-b1.dts realtek: mdio: drop realtek,smi-address property 2026-03-21 22:26:02 +01:00
rtl9302_zyxel_xgs1250-12-common.dtsi realtek: dts: rtl93xx: use PHY_* macros for Zyxel XGS1X10/1250 2026-05-01 12:41:49 +02:00
rtl9302_zyxel_xmg1915-10e.dts realtek: make Zyxel XMG1915-10E generic for whole family 2026-05-11 10:34:53 +02:00
rtl9302_zyxel_xmg1915-10ep.dts realtek: add support for Zyxel XMG1915-10EP 2026-05-11 10:34:53 +02:00
rtl9302_zyxel_xmg1915.dtsi realtek: add support for Zyxel XMG1915-10EP 2026-05-11 10:34:53 +02:00
rtl9303_hasivo_s600wp-5gt-2sx-se.dts realtek: rtl930x: add Hasivo S600WP-5GT-2SX-SE 2026-04-24 12:17:26 +02:00
rtl9303_hasivo_s1100w-8xgt-se.dts realtek: dts: rtl93xx: use macro for PHY port definitions 2026-05-01 12:41:49 +02:00
rtl9303_hasivo_s1100wp-8gt-se.dts realtek: dts: convert devices to PHY_C45() 2026-04-01 14:12:14 +02:00
rtl9303_tplink_tl-st1008f-v2.dts realtek: dts: rtl93xx: replace LED magic values with macros 2026-05-01 12:41:49 +02:00
rtl9303_vimin_vm-s100-0800ms.dts realtek: dts: rtl93xx: replace LED magic values with macros 2026-05-01 12:41:49 +02:00
rtl9303_xikestor_sks8300-8t.dts realtek: dts: add PHY_C45() macro 2026-04-01 14:12:14 +02:00
rtl9303_xikestor_sks8300-8x.dts realtek: dts: rtl93xx: replace LED magic values with macros 2026-05-01 12:41:49 +02:00
rtl9303_xikestor_sks8310-8x.dts realtek: dts: rtl93xx: replace LED magic values with macros 2026-05-01 12:41:49 +02:00
rtl9311_linksys_lgs352c.dts realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9312_plasmacloud_common.dtsi realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9312_plasmacloud_esx28.dts realtek: rtl931x: Add support for Plasma Cloud ESX28 Switch 2025-10-04 16:16:22 +02:00
rtl9312_plasmacloud_psx28.dts realtek: rtl931x: psx28: specify POE MCU reset GPIO 2026-04-14 10:38:28 +02:00
rtl9313_xikestor_sks8300-12x-v1.dts realtek: dts: rtl93xx: use SWITCH_PORT_SFP for ports 2026-05-01 12:41:49 +02:00
rtl9313_zyxel_xs1930-10.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930-12f.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930-12hp.dts realtek: pcs: switch SerDes polarity to {rx,tx}-polarity 2026-04-24 10:13:38 +02:00
rtl9313_zyxel_xs1930.dtsi realtek: add generic support for Zyxel XS1930 lineup 2026-04-20 11:13:06 +02:00